Eurotops Versand 29957 Manuals

EP644 LIGHTER CAMERA INSTRUCTION MANUAL PLEASE READ THE MANUAL BEFORE FIRST USE. SAVE IT FOR FUTURE REFERENCE! THE LIGHTER CAMERA IS DELIVERED UNCHARGED. ON FIRST TIME USE, CHARGE IT FOR 6 HOURS. WHEN RECORDING A VIDEO OR TAKING A PHOTO, MAKE SURE THAT THE SIDE OF THE DEVICE CONTAINING THE SLOT FOR MICRO SD CARD (8) SHOULD BE FACING DOWNWARDS. THIS WILL AVOID THE VIDEOS AND PHOTOS BEING UPSIDE DOWN WHEN VIEWING. SYSTEM REQUIREMENTS • Windows operating system : Windows XP/Vista/Windows 7 or later version. • Macintosh operating system : Mac OS X version10.4.11/10.5.8/10.6.4 or later version. PRODUCT DESCRIPTION 1. Lighter’s head 2. Ignition switch 3. USB port 4. Reset hole 5. ON/ OFF button/ video recording 6. Camera lens: Do not cover the camera lens when you are taking pictures or recording videos. 7. LED flashlight 8. Slot for micro SD card 9. LED indicator 10. Flashlight ON/ OFF Accessories included: USB cable + CD Driver INSERTING THE MICRO SD CARD Before first use, insert a micro SD card (maximum capacity: 32 GB, not included). Note: To remove the SD card, also proceed as step 2. 1 2 3 4 When the card is fully inserted, you will hear a click CHARGING THE LIGHTER CAMERA Charging time: About 5-6 hours NOTES : - To preserve your battery, please use the device until the battery discharges totally, and charge at its maximum capacity during the 5 first times of use. - If the device has not been used for a long time, please fully recharge it before use. -In order to maximize the capacity of the battery storage, please continue to charge for 30mins to one hour after the indicator light becomes blue. CONNECTION TO USB CABLE (included) CHARGING 1. After connection to USB port of computer, the red LED indicator turns on. A few seconds later, the unit vibrates and flashes 3 times in red and blue, and then the indicator becomes red and blue when charging. Note: If no memory card is inserted, the blue indicator will be solid red, flashing in blue when charging. 2. When fully charged, it becomes blue. 3. Then disconnect it to USB port of computer, it vibrates twice and the LED turns off. SETTING TIME AND DATE - If the battery is not charged enough, discharged or has not been charged for several days, the time may reset to factory default settings. In that case, set the correct date and time again. - Always make sure that the device is sufficiently charged to allow the update of the time and date. So if you plan to make photos and videos regularly, charge it regularly. Setting recording hour and date (For PC only) 1. Connect the device to your computer. 2. The file directory containing the photos and videos automatically displays. If it does not display, go to “My Computer” and double-click the removable drive corresponding to the memory of the device. 3. Right-click just next to DCIM file. 4. Click “NEW” and then “Text document”. 5. Open it and write date and time in the format below: YEAR.MONTH. DAY HOUR:MINUTES:SECONDS (for example: if the date is 31 January 2013 and time is 9:30:30, write 2013.01.31 9:30:30). 6. Save it under file name: “time”. 7. Unplug the device. 8. Turn it on to confirm the file backup. The file will be saved, deleted from file directory and will not display in file directory. 9. Take a video to ensure the date and time are correct. OPERATION HOW TO TURN ON THE LIGHTER CAMERA 1. Long press ON/ OFF button (5) till the blue indicator is on. 2. After a few seconds, the indicator flashes and the device vibrates 3 times at the same time. Then the indicator is blue: the device enters standby mode. Auto Power off When the device enters stand-by mode and is not used for about 2 minutes, it will vibrate and shut down automatically. HOW TO TURN IT OFF Note: To power off the device, you should be in video mode. See procedure below. 1. Long press ON/ OFF button (5) till the blue indicator flashes twice and the device vibrates twice at the same time. The indicator is in video mode. 2. Short press power button (5), the indicator flashes twice, and the device vibrates twice at the same time. Then the indicator turns off indicating the device is off. Note: The latest photos and videos will be saved and then the device will turn off. TAKING PHOTOS DO NOT COVER THE CAMERA LENS WHEN YOU ARE TAKING PICTURES OR RECORDING VIDEOS. 1. Turn on your lighter camera if it is off. 2. In standby mode (blue light), short press the power button (5). The indicator flashes once; the photo is taken and saved. Note: Repeat step 2 to take other photos. RECORDING A VIDEO Recording a video In standby mode (blue light), long press the power button (5). The indicator light flashes twice and the device vibrates twice at the same time. Video recording starts when the indicator turns off. Stopping a video Short press power button (5), the indicator flashes twice and the device vibrates twice at the same time. The indicator turns off indicating the video is saved. WEBCAM FUNCTION • In order to get the webcam function, you should install the STK03N 2 driver (for WINDOWS 7, 8 or 10) or STK02N 2.3. (for WIN XP/ 2000) contained in the included CD, into your computer. • Make sure that a video communication software such as Skype, MSN, Messenger, Facebook, etc. is initially installed. • WEBCAM function does not work on MAC systems. • If you use Facebook, make sure to shut down the Client’s software named “amcap.exe” first if it is opened. WINDOWS 7, 8 and 10 1. Double-click . 2. Install the STK03N driver by double-clicking . 3. After installing the driver, extract the “Webcam driver” and double-click it. 4. Double-click icon. Then select “Options” and “Preview”. 5. Connect the device to the computer. Note: Before connecting the device, make sure that there is no SD card. 6. Shut down “amcap”. Open communication software. Open the video communication software and use the device connected to USB port of computer via included USB cable for online chat videos. WIN XP/ 2000 1. Repeat steps 1 and 2 of procedure of WINDOWS 7-8-10. Note: The driver name is STK02N 2.3. 2. Connect the device to the computer. Note: Before connecting the device, make sure that there is no SD card. 3. Double-click “My Computer” icon, and then icon . Note: This procedure is necessary to check whether the webcamera correctly works. 4. Shut down . Open the video communication software and use the device connected to USB port of computer via included USB cable for online chat videos. LED FUNCTION ON OFF