EVERSPRING EVR HSP02 Manuals

EVR_HSP02 Z-Wave Presence Detector Firmware Version : 1.3 Quick Start S This device is a Z-Wave Sensor. Tripple click the little button behind the battery cover to include or exclude the device. Clicking the little button behind the battery cover or a detected action by the sensor will wake up the device and keep it awake. Please refer to the chapters below for detailed information about all aspects of the products usage. Product description This presence detector using PIR (passive infrared receiver) detects the presence of a person in a room. The unit sends information to a controller or any other associated Z-Wave device. Up to 5 devices can be controlled from this device. The sensor is a battery-powered device, which is in sleeping mode unless an action is detected. After a programmable sleeping time the device wakes up and sends a status information. After this the unit goes back to sleeping mode. The battery can be changed without unscrewing the device from the door or frame. The unit will give a visual warning on the device and sends a warning to the Z-Wave controller, when the battery needs to be replaced. The unit offers a tampering control and sends an alarm message when tampered. Installation Guidelines 1. Release the Sensor from the battery cover by removing the fixing screw.