Extreme Max 3004.0180 Manuals

Customer Service: 651-357-1861 | [email protected] | www.extrememax.com 1 Battery Holder 3004.0180 Post Mount Single Battery Tray Assembly & Installation Instructions Fig. 2 3092ex0418 If you have questions or do not understand any of the procedures, STOP, and call the Boat Lift Boss Service Dept. at 651-357-1861 between 8:00 A.M. and 5:00 P.M. Central Standard Time, Monday - Friday. Fig. 1 Caution: • Do not exceed the one-battery capacity. • Periodically check all mounting hardware. Replace or repair any loose, missing, or damaged pieces. Positioning the Battery Tray: Determine the desired height and position for the battery tray. Optimal positioning should place the batteries 2’ – 3’ from the unit being powered for the easy cable attachment. Be aware of the boatlift’s entire range of motion and ensure the battery tray is clear of any moving pieces. The battery tray may be fastened with either the provided hose clamps or the provided self- tapping screws. Installation with Hose Clamps: Place the battery tray mounting bracket against the upright in the desired location. Use the two provided hose clamps to fasten the mounting bracket to the upright, one above the battery tray and one beneath the battery tray as shown. Tighten the clamps firmly before placing any weight onto the battery tray. Installation with Screws: Place the battery tray mounting bracket against the upright in the desired location. Use the two provided self-tapping screws to fasten the mounting bracket to the upright, using the two screw holes located in the mounting bracket. Tighten the screws firmly before placing any weight onto the battery tray.