Extron electronics AXI 016 Manuals

1 IMPORTANT: IMPORTANT: Go to www.extron.com for the complete user guide, installation instructions, and specifications. AXI 016 • Setup Guide This guide provides basic instructions for an experienced technician to install the AXI 016 Audio Expansion Interface. The AXI 016 is a pure breakout device that provides 16 line-level outputs for EXP-enabled devices. The AXI 016 is simple to use with no DSP processing hardware controls. For additional information and specifications, go to www.extron.com. NOTES: • EXP-enabled devices are devices that contain an Extron EXP port for routing 16 bidirectional channels of digital audio. • In this guide, “EXP-enabled devices” and “EXP devices” are used interchangeably. Disconnect Power and Mount the AXI 016 Disconnect power from the AXI 016 and power off all devices that will be connected to it. The AXI 016 is housed in a half-rack width, 6-inch deep, 1U-high metal enclosure that can be rack mounted, set on a rack shelf, or placed on a table with the provided rubber feet. Select a suitable mounting location, then choose an appropriate mounting option. Rear Panel Connections AXI 016 9 10 11 12 1 2 3 4 OUTPUTS EXP INPUT POWER 12V 0.7 A MAX 13 14 15 16 5 6 7 8 EXP THRU PRIMARY DEVICE SECONDARY DEVICE INPUT THRU EXP AUDIO EXPANSION INTERFACE AXI 016 CLIP SIGNAL 1 2 3 4 5 6 7 8 9 10 11 12 OUTPUTS 13 14 15 16 A B D C A B C Figure 1. AXI 016 Rear Panel Connections A Power Inlet B Analog Audio Outputs C EXP Input Port and LED D EXP Thru Port and LED A 12 VDC Power Inlet — Connect the 12 VDC power supply to the rear panel captive screw power inlet. Then, plug the power cable into the IEC inlet on the external power supply (see figure 2 and the following Attention notices). Rear Panel Power Receptacle DC Power Cord Captive Screw Connector Ground all devices. External Power Supply 12 VDC, 1.5 A max. – Return +12 VDC input Ridged Smooth 1A MAX 100-240V 50-60Hz Figure 2. Connecting the External Power Supply ATTENTION: • Always use a power supply provided by or specified by Extron. Use of an unauthorized power supply voids all regulatory compliance certification and may cause damage to the supply and the end product. • Utilisez toujours une source d’alimentation fournie par Extron. L’utilisation d’une source d’alimentation non autorisée annule toute conformité réglementaire et peut endommager la source d’alimentation ainsi que l’unité.