Fanco Commercial Fan Manuals

COMMERCIAL FAN INSTRUCTION MANUAL MAINTENANCE & STORAGE •� Please�ensure�the�fan�is�turned�off�prior�to�cleaning. •� Use�only�a�soft,�damp�cloth�to�clean�the�fan •� Do�not�immerse�the�fan�in�water�and�do�not�allow�water�to� drip�into�the�motor�housing.�The�product�is�suitable�for�indoor� installation�only. •� Do�not�use�gasoline�/�paint�thinner�or�other�chemicals�to� clean�the�fan. •� To�clean�the�fan�blade�use�an�object�such�as�a�screw�driver� to�disengage�the�hooks�(8�in�total)�holding�the�front�of�the� grille�to�the�rear. •� Carefully�remove�the�front�grille�and�wipe�the�blades�clean. •� Re-assemble�the�grille�by�clicking�the�hooks�back�into�place. •� Cover�the�fan�to�protect�it�from�dust�and�store�in�a�cool,�dry� place. SPECIFICATIONS SIZE 30” 26” 24” 20” VOLTAGE 220-240V 220-240V 220-240V 220-240V FREQUENCY 50HZ 50HZ 50HZ 50HZ POWER 200W 180W 170W 130W NOISE ≤70dB(A) ≤70dB(A) ≤70dB(A) ≤70dB(A) *The�actual�power�may�be�a�+�/�-�10%�deviation CIRCUIT DIAGRAM SAFETY INSTRUCTIONS If the supply cord is damaged on arrival it must be replaced by the manufacturer, or a similarly qualified individual. If a power cord is subsequently damaged by the client the manufacturer will not be able to replace the cord. The unit must not be used before suitable instalaltion (see overleaf). Do not hang anything from the guard The pedestal fan should be placed on steady, level ground. The wall fan should be installed approximately 2.5m above the floor. Do not insert fingers or any foreign objects into the guard. The appliance is not designed for use by persons with reduced physical, sensory or mental capabilities. Children and infants should be supervised at all times when within the same proximity as the product. This product is designed for indoor use only WARRANTY The product is guaranteed for 1 year (12 months) from the date of purchase. The warranty is a repair or replacement warranty. To be entitled to a warranty claim the consumer must contact the authorised Fanco retailer (the place of purchase) in writing as soon as they are aware of the fault, and provide the following information; a. The original dated proof of purchase (i.e. purchase receipt) from an authorised Fanco retailer b. Details of the nature of the fault c. If possible and relevant, photographs may also be requested. The consumer may be required to return the item to the place of purchase for testing when advised. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This warranty is valid in Australia ONLY What is not covered by the product warranty: The Warranty covers only defects due to manufacturing faults, and therefore does not include defects caused by misuse, transport damage, modification or alterations made to the products, incorrect installation, installation by unauthorised or unqualified personnel, water damage, damage caused by alternative power systems (for example: solar inverters etc), lack of maintenance or cleaning of the product. The Warranty only covers products that have been installed and operated within the guidelines specified by Fanco, and within the correct operating voltage range as stated on the product’s rating label. The Warranty covers only the product, no additional expenses, including but not limited to; freight costs to return a faulty item and to send out a repaired/replacement item, any costs associated with installation or removal of the original item or repaired/ replacement item, any expenses incurred by the consumer in making the warranty claim.