Farmi Forest Corporation VALBY HF 231 Manuals

HF 231 OPERATION, MAINTENANCE AND SPARE PARTS C---EN---271006---ER 03299780 www.farmiforest.fi Farmi Forest Corporation Ahmolantie 6 FIN---74510 PELTOSALMI FINLAND Tel. +358 (0) 17 83 241 Fax. +358 (0) 17 8324 372 READ THIS OPERATION AND MAINTENANCE MANUAL CAREFULLY BEFORE USING THE MACHINE HYDRAULIC FEEDER HF 231 From machine:329 4157 HF 231 www.farmiforest.fi FARMI Forest Ahmolantie 6 FIN---74510 PELTOSALMI FINLAND Tel. +358 (0) 17 83 241 Fax. +358 (0) 17 823 606 WARNING SYMBOLS IN THIS MANUAL Imminent danger which could cause serious personal injury or death. DANGER! Danger which could cause personal injury. WARNING! Conditions or misuse that could damage equipment or machinery. CAUTION! Reminders, such as for performing checks or carrying out maintenance or repair procedures. NOTE! INTRODUCTION This manual includes the information and maintenance instructions required for operating the machine in the optimal manner. Although you have experience in using this kind of machinery, read the operation and maintenance instructions carefully since they include information enabling efficient and safe operation. Regular maintenance is the best way to guarantee the efficient and economical performance of the machine. Each and every operator must read, understand, and follow all safety instructions and procedures. CAUTION! CUSTOMER FEEDBACK We are happy to receive your opinions and suggestions for improvements by mail, fax or e---mail. All implemented suggestions for improvements will be rewarded. HF 231 www.farmiforest.fi FARMI Forest Ahmolantie 6 FIN---74510 PELTOSALMI FINLAND Tel. +358 (0) 17 83 241 Fax. +358 (0) 17 823 606 Farmi Forest Corporation Ahmolantie 6, FIN--74510 PELTOSALMI, Finland Informs that the machine, launched on to the market, FARMI Hydraulic feeder (make) HF 231 (type) (serial number) which is incapable of operating individually, has been intended as a structural part of a machine in such a way they together form the machine referred to in Directive 98/37/EEC and in the amendmends related to it as well as in the national statutes which bring them into force. It shall meet the fundamental requirements of Directive 98/37/EEC relating to this machine part. The following unified standards have been applied to the design of the machine: EN292---2, EN294, EN60204---1 The following national standards and specifications have been applied to the design of the machine: PrEN13252, prEN1553---1 In addition, we inform that this machine part shall not be taken into use before a guarantee of the conformance to the EU requirements has been given, in accordance with Directive 98/37/EEC, the amendments related to it and the national statutes (VPn 1314/94) which bring them into force, of the machine of which it is a part. Peltosalmi 01.09.2002 (place) (date) Juha Hallivuori GUARANTEE GIVEN BY THE MANUFACTURER OF A DEVICE INTENDED AS A MACHINE PART HF 231 4 1.SAFETY 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.GENERAL 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2.OPERATIONAL SAFETY 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3.OPERATION 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4.OILS AND GREASES 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5.MAINTENANCE 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.6.LIFTING 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.SAFETY INSTRUCTIONS FOR HYDRAULIC SYSTEMS 6 . . . . . . . . . . . . . . . . . . . . . . . . . 3.PLATES AND STICKERS 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.FEED CHUTE PRESENTATION 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.FIELD APPLICATION 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2.MAIN COMPONENTS 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.TECHNICAL DATA 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.MOUNTING 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.OPERATION 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.1.CONTROL HANDLE 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.2.SAFETY HANDLE 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.3.OPERATION 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.4.SETTING THE FEEDER SPEED 12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.5.EMTYING THE CHIPPER AFTER USE 12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.CHANGING THE HYDRAULIC UNIT FOR USE WITH CONSTANT PRESSURE PUMPS 12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.MAINTENANCE 12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.HYDRAULICS CIRCUIT DIAGRAM 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SPARE PARTS 14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HF 231 14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2---LEVER USE HF 231 18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HYDRAULICS 20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DIRECTIONAL CONTROL VALVE 24 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Thread Millimeter Inch M6 10 7/16 M8 13 1/2 M10 17 11/16 M12 19 3/4 M16 24 15/16 M20 30 1 3/16 WHEN ORDERING SPARE PARTS, PLEASE INDICATE MACHINES TYPE FROM THE MACHINE PLATE, SPARE---PARTS ORDER NUMBER, DESCRIPTION AND QUANTITY REQUIRED. Example: HF 231, Upper feed roller, 1 pc

OPERATION, MAINTENANCE AND SPARE PARTS MANUAL HF 231 A--USA--200802--JaK www.normet.fi 03299760 03294709 Normet Corporation Ahmolantie 6 FIN---74510 PELTOSALMI FINLAND Tel. + 358 (0) 17 83 241 Fax. + 358 (0) 17 823 606 It is very important to read this instruction handbook thoroughly before using the machine! HYDRAULIC FEEDER AND FEED CHUTE HF231 From machine: 329 4036-- SAFETY INSTRUCTIONS HF 231 www.normet.fi 03294709 --- 3 --- 1. TERMS AND SYMBOLS USED IN INSTRUCTIONS Safety is a combination of operator com- mon sense and alertness at all times when the machine is being operated or serviced. THINK SAFETY! This message is used for general remind- ers of good safety practices or to direct attention to unsafe practices. The mes- sage will appear in your operator’s manu- al and/or the sign will appear on the ma- chine with the color combination of yel- low and black. CAUTION! This message denotes a specific poten- tial hazard. The sign will be displayed on the machine in areas of potential hazard. The sign will have the color combination of yellow and black. WARNING! This message denotes the most serious specific potential hazard. The sign will be displayed on the machine in areas of po- tential hazard. DANGER! Messages labeled ”Important” will ap- pear in your operator’s manual to provide specific instructions for performing ad- justments, services, etc. If these instruc---tions are not followed it could re- sult in damage to the machine. IMPORTANT!