Fellowes POWERSHRED HS-1010 Manuals

Quality Office Products Since 1917 POWERSHRED ® HS-1010 Please read these instructions before use. Do not discard: keep for future reference. IMPORTANT SAFETY INSTRUCTIONS — Read Before Using! 15 15 15 • Keep away from children and pets. Keep hands away from paper entry. Always set to off or unplug when not in use. • Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away from shredder openings. If object enters top opening, switch to Reverse (R) to back out object. • Never use aerosol products, petroleum based lubricants or other flammable products on or near shredder. Do not use canned air on shredder. • Do not use if damaged or defective. Do not disassemble shredder. Do not place near or over heat source or water. • This shredder has a Disconnect Power Switch (C) in the door. The door must be closed to operate shredder. In case of emergency, open door. This action will stop shredder immediately. • Avoid touching exposed cutting blades under shredder head. • Shredder must be plugged into a properly grounded wall outlet or socket of the voltage and amperage designated on the label. The grounded outlet or socket must be installed near the equipment and easily accessible. Energy converters, transformers, or extension cords should not be used with this product. • Do not operate the machine without the safety flap closed (A). Will shred: Paper only Will not shred: Adhesive labels, continuous form paper, transparencies, newspaper, junk mail, credit cards, CD/DVDs, staples, paper clips, cardboard, laminates, file folders, X-rays or plastic other than noted above Paper shred size: High Security Micro-Cut....(Din 6) 1/32 in. x 3/16 in. (0.8mm x 5.0mm) Maximum: Sheets per pass..................................................................................10* Paper entry width............................................................12 in. (305mm) *8.5 in. x 11 in., 20lb., (75g) paper at 120V, 60 Hz, 15Amps; heavier paper, humidity or other than rated voltage may reduce capacity. Recommended maximum daily usage rates: 5,000 sheets per day. 10 sheets per pass. * In order to perform at capacity, shredder must be plugged into a dedicated 20Amp, 120V outlet and auto oil system must be engaged. H. Control Panel and LEDs 1. ON/OFF R 2. Reverse 3. Bin full 4. Door open 5. Safety Flap Open R R 6. Low oil R R R R R 7. Auto oil complete A. Safety Flap B. Paper entry C. Disconnect switch (open door) D. Door E. Basket - paper (inside) F. Casters G. See safety instructions R R 1 ENGLISH Model HS-1010 KEY INDICATOR LIGHTS CAPABILITIES ADVANCED PRODUCT FEATURES Stops automatically when door is opened. Symbols flash alternately Stops automatically when bin is full. Empty bag when bag full indicator lights up Stops automatically if too much paper is inserted. Automatic reverse if paper jams Stops automatically if safety flap is opened. Symbols flash alternately Overload protection. Machine stops to cool down- approx. 10-15 minutes. Symbols flash alternately Cutting shafts are automatically oiled Oil bottle is empty Sleep Mode Energy saving feature shuts down the shredder after 1 hour of inactivity Auto Oil™ Lubricates the cutters automatically to enhance performance and extend shredder life A. B. G. H. F. E. D. C. R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R SHREDDER SET-UP OILING SET-UP PAPER Ensure access to a dedicated 20Amp, 120V outlet 2 BASIC SET-UP BASIC SHREDDING OPERATION Plug in and make sure door is closed Press ( ) ON to activate When finished shredding set to ( ) OFF Feed paper straight into paper entry and release Do nothing and shredder will go automatically to sleep mode after 1 hour Make sure safety flap is securely in place • Empty wastebasket when bin full indicator lights up. • Shredder won’t run if the door is open, or bin needs to be emptied. • Maintenance is an important part of protecting your investment. Don’t forget to purchase our oil (3505801) and shredder bags (3604101). Go to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers. LIMPIEZA DE LOS SENSORES INFRARROJOS DE INICIO AUTOMÁTICO Eliminates frustrating jams by preventing overloads. Remove lid from oil bottle Put oil tube into oil bottle and screw stopper on Place oil bottle into oil holder on side if cabinet Close door. Plug into socket-outlet Oil pump starts automatically on first use. To stop Oil Indicator ( R R R R R R R ) from blinking red, press ON ( ) after 15 seconds After changing oil bottle, press Reverse (R) until Oil Indicator ( R R R R R ) no longer blinks red R R R R R R R R R R R R R R 5 6 7 8 4 3 2 1 Hook oil bottle holder into side of cabinet Remove oil bottle holder from cabinet SHEET CAPACITY GAUGE PAPER JAM TROUBLESHOOTING AND PREVENTIVE MAINTENANCE SLEEP MODE CLEANING AUTO-START INFARED SENSORS Electronically measures paper thickness to prevent paper jams: R R Up to RED: Too many sheets have been inserted. Automatic reverse of paper. Up to YELLOW: Maximum sheet capacity. Up to GREEN: Normal sheet capacity during shredding process. In sleep mode To get out of sleep press ON ( ) insert paper or WHEN IN SLEEP MODE Set to Off ( ) and empty bin. Replace bin and follow the below procedures. Stops automatically if too much paper is inserted. Automatic reverse if paper jams Gently pull uncut paper from paper entry. Machine runs for a short time in reverse. Repeat if necessary Shred One Sheet Paper detection sensors are designed for maintenance free operation. However, on rare occasions the sensors may become blocked by paper dust causing the motor to run even if there is no paper present (Note: two paper detection sensors are located in the center of the paper entry). Turn off and unplug shredder Locate Auto-start infared sensor Clean any contamination from the paper sensors Use thin, long-handled brush to clean sensors. Make sure brush is clean and dry TO CLEAN THE SENSORS 3 R R R R R R R 2 1 R R R 2 1 3 1 2 R R 3 R R 4 R R R R R R R or 4 5 1 3 R R R R R R R 2 1 2 POWERSHRED ® HS-1010 ©2010 Fellowes, Inc. Part No. 404909 Australia +1-800-33-11-77 Canada +1-800-665-4339 Europe 00-800-1810-1810 Mexico +1-800-234-1185 United States +1-800-955-0959 Questions or Concerns? www.fellowes.com Troubleshooting Registration Manuals Customer Service & Support Troubleshooting Replacement parts General questions Limited Warranty: Fellowes, Inc. (“Fellowes”) warrants the parts of the machine to be free of defects in material and workmanship and provides service and support for 1 year from the date of purchase by the original consumer. Fellowes warrants the cutting blades of the machine to be free from defects in material and workmanship for 1 year from the date of purchase by the original consumer. If any part is found to be defective during the warranty period, your sole and exclusive remedy will be repair or replacement, at Fellowes’ option and expense, of the defective part. This warranty does not apply in cases of abuse, mishandling, or unauthorized repair. The user is responsible for any additional costs incurred by Fellowes in servicing the paper shredder outside of the country where the shredder is initially sold. ANY IMPLIED WARRANTY, INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable for any consequential or incidental damages attributable to this product. This warranty gives you specific legal rights. The duration, terms, and conditions of this warranty are valid worldwide, except where different limitations, restrictions, or conditions may be required by local law. For more details or to obtain service under this warranty, please contact us or your dealer. WARRANTY