FIC AN19E Manuals

AN19E/AN19C MAINBOARD MANUAL DOC No.: M02811 Rev. : A0 Date : 9, 2002 Part No. : 25-11659-00

Quick Reference The mainboard has several user-adjustable jumpers and/or switches on the board that allow you to configure your system to suit your requirements. This quick reference contains information on the various hardware settings on your mainboard. To set up your computer, you must complete the following steps: I Step 1 - Set system switches/Jumpers I Step 2 - Install system memory modules I Step 3 - Install the Central Processing Unit (CPU) I Step 4 - Install expansion cards I Step 5 - Connect ribbon cables, cabinet wires, and power supply I Step 6 - Set up BIOS software I Step 7 - Set up supporting software tools WARNING: Excessive torque may damage the mainboard. When using an electric screwdriver on the mainboard, make sure that the torque is set to the allowable range of 5.0 ~ 8.0kg/cm. Mainboard components contain very delicate Integrated Circuit (IC) chips. To prevent static electricity from harming any of the sensitive components, you should follow the following precau- tions whenever working on the computer: 1. Unplug the computer when working on the inside. 2. Hold components by the edges and try not to touch the IC ||||chips, leads, or circuitry. 3. Wear an anti-static wrist strap which fits around the wrist. 4. Place components on a grounded anti-static pad or on the bag that came with the component whenever the components are separated from the system.