FLIR M-Series Manuals

M-Series 432-0003-00-12 Revision 140 January 2012 Installation Guide

Installation Guide M-Series

FLIR M-Series and NavNet TZtouch Overview The following example illustrates the integration of the FLIR M-Series into a NavNet network. The M- Series and the JCU controller are set with a fix IP address compatible with NavNet TZtouch. When you purchase a FLIR (with JCU), it will have a different IP address and will require changes before it is used with the TZtouch system. Installation FLIR Configuration You have to assign the M-Series and the Controller (JCU), a fixed IP address. We recommend you use 192.168.252.200 / 255.255.255.0 for the M-Series Camera, and 192.168.252.201 / 255.255.255.0 for the JCU (although any IP beginning with 192.168.252.x would work as long as they don’t collide with any existing IP). The FLIR M-Series and the JCU controller are UPnP-enabled devices. You can easily see the list of UPnP-enabled devices from your computer by opening “My Network Places” if using a Microsoft XP computer or “Network” if using a Vista, Windows 7 or Windows 8 computer. Note that the M-Series and JCU will only appear on your PC, if they are all on the same network domain. Normally, the JCU gets its power from the camera when directly connected to the M-Series. When connecting the JCU to a HUB or Switch, you must use a power injector (48V) to power the unit (see diagram above). When the computer is connected to the M-Series Camera and JCU via an Ethernet cable or via a Hub/Switch (without router or DHCP server on the network), the M-Series and JCU automatically assign themselves an IP address of 169.254.x.x / 255.255.0.0. In order to access the configuration

M-Series 432-0003-00-10 Revision 140 January 2011 Operator’s Manual

M-Series 432-0003-00-10 Revision 150 January 2012 Operator’s Manual

Operator’s Manual M-Series

Integration with Garmin Displays Application Note FLIR M-Series and MD-Series Thermal Camera Garmin GPSMAP® 8000 Glass Helm Series