Flying Industry Development 3S2UB-DC12+CV-6 Manuals

SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD Http://www.carymart.com E-Mail: [email protected] RF Wireless Remote Control Kit (Model 0020533 3S2UB-DC12+CV-6) The receiver is designed for one-transmitter-many-receivers system. Use a 6 buttons transmitter to control 3 receivers. Package Include: 3 x Receiver: S2UB-DC06 / S2UB-DC09 / S2UB-DC12 / S2UB-DC24 (2 Channel / Four Control Modes) 1 x Transmitter: CV-6 1 x User manual Feature: Application: It can be used in industry automation, agriculture automation and home automation, such as factory, house, farm, pasture, vehicle, ship, offshore operation, aerial vehicle, field call, etc. It can remote control equipments on land, water and air, such as remote control lights, sirens, locks, motors, fans, winches, blinds, linear actuators, doors, windows, electric solenoid valves, security alarm, business signs and various devices. Wireless control, easy to install. Relay Output: This receiver is relay output, it can be used to operate both DC and AC equipments. The terminals are NO / NC (normally open / normally closed), which serves as a switch. That means you should also connect a separate power supply to equipments. You can turn on/ off the receiver with transmitter (remote control) from any place within a reliable distance. Wireless RF signal can pass through walls, floors, doors or windows. With reverse power protection and over current protection. Reliable control: The receiver only works with the transmitter which use same code. One/several transmitters can control one/several receivers simultaneously. You can use two or more units in the same place. Receiver Parameters: Model No.: S2UB-DC06 / S2UB-DC09 / S2UB-DC12 / S2UB-DC24 Power Supply (Operating Voltage): DC6V (S2UB-DC06), DC12V±1V (S2UB-DC12), DC9V±1V (S2UB-DC09), DC24V±1V (S2UB-DC24) Output: Relay output (Normally open and normally closed) Working Voltage Range of Relay: AC110~240V or DC0~28V Working Frequency: 315MHz / 433MHz Channel: 2 CH Control Modes: Toggle, Momentary, Latched, Momentary + Toggle Static Current: ≤6mA Maximum Working Current: 10A / each channel PCB size: 67mm x 50mm x 18mm Case size: 75mm x 54mm x 27mm Work with Fixed code transmitters. Transmitter: Model No.: CV-6 Channel: 6CH Remote Control Distance: 500m / 1500ft (theoretically) Encode: Fixed code by Soldering Unit size: 110mm x 50mm x 18mm Power Supply: 1 x 23A -12V battery (included, can be used for 12 months) Matching Transmitters: The receiver can work with different transmitters, such as model CV-6 (500M), or CB-6 (1000M) etc. Working Range: With a transmitter (such as CV-6) to form a complete set, the maximum working distance can reach 500M in an open ground. The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance. If you want to have a further working range, you can install an external antenna to the receiver, and you also can use a powerful transmitter, such as CB series transmitters.