Flying Industry Development S1PF3-DC12 Manuals

SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD Http://www.carymart.com E-Mail: [email protected] RF Wireless Remote Control DC Motor Controller / Transmitter & Receiver This is the DC motor controller. The DC motor controller can remote control one DC motor (DC12V/24V) rotates in positive/ reversal direction. You can connect two restrictive switches to receiver and use them to stop motor rotation. Package Include: 1 x Receiver: S1PF3-DC12 / S1PF3-DC24 2 x Transmitter: CWC-3 1 x User manual Features: Wireless control, easy to install Waterproof case With high power of 30A Control DC motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with voltage DC12V / 24V. You can rotate the motor in positive or reversal direction with the transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors. Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code. One/several transmitters can control one/several receivers simultaneously. If you use two or more receivers in the same place, you can set them with different codes. Transmitting Frequency: 315MHz / 433MHz Receiver: Model No.: S1PF3-DC12 / S1PF3-DC24 Coding Type: Fixed code or learning code Coding Setting: By learning Power Supply (Operating Voltage): DC12V±1V (S1PF3-DC12), DC24V±1V (S1PF3-DC24) Output: DC12V (S1PF3-DC12), DC24V (S1PF3-DC24) Case Size: 100mm x 67mm x 39mm Quiescent Current: 5mA Rated Current: 15A The Maximum Instantaneous Current of Starting Motor: 30A Transmitter: Model No.: 0021102(CWC-3) Channel: 3 CH Waterproof Remote Control Distance: 50m / 300ft (theoretically) Encode: Fixed code by soldering Unit Size: 58mm x 30mm x 12mm Power Supply: 1 x 23A -12V battery (included, can be used for 12 months) Usage: Power supply: Connect power supply DC12V / 24V to terminal “INPUT”; connect motor to terminal “OUTPUT”. You can exchange the output wires of motor to change the rotating direction of motor. Function of transmitter: Press button ▲ on remote: terminal “Output” output DC power, motor rotates in positive direction. Press button ▼ on remote: terminal “Output” output DC power, motor rotates in reversal direction. Press button on remote: motor stops. Function of manual buttons in receiver: Press button K3 in receiver: terminal “Output” output DC power, motor rotates in positive direction. Press button K1 in receiver: terminal “Output” output DC power, motor rotates in reversal direction. Press button K2 in receiver: motor stops. Restrictive function: You can connect two restrictive switches to terminals “X1” and “X2”, if the restrictive switch X1 or X2 is connected, the motor will rotate; if the restrictive switch X1 or X2 is disconnected, the motor will stop automatically. That means when the restrictive switch “X1” is connected, the motor will rotate in positive direction; when the restrictive switch “X1” is disconnected, motor will stop automatically. When the restrictive switch “X2” is connected, the motor will rotate in reversal direction; when the restrictive switch “X2” is disconnected, motor will stop automatically. Learning the button of transmitter: 1) Press and hold “K3” button of receiver; when signal LED on the receiver begin to shine, release “K3” button. Before signal LED shines 5 seconds, press ▲ button of transmitter, if the signal LED off, that means learning is successful. 2) Press and hold “K2” button of receiver; when signal LED on the receiver begin to shine, release “K2” button. Before signal LED shines 5 seconds, press button of transmitter, if the signal LED off, that means learning is successful.