Flying Industry Development S2T-DC06-ANT2 Manuals

SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD Http://www.carymary.com E-Mail: [email protected] RF Wireless Remote Control Radio Controller / Transmitter & Receiver Package Include: 1 x Receiver: S2T-DC06-ANT2 / S2T-DC09-ANT2 / S2T-DC12-ANT2 / S2T-DC24-ANT2 (2 Channels / Toggle Control Mode) 2 x Transmitter: C-2 1 x User manual Feature: Wireless control, easy to install Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with AC110~240V or DC0~28V. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. With characteristics of reverse power protection and over current protection Audible / visual indication Use microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology. Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code. One/several transmitters can control one/several receivers simultaneously. If you use two or more receivers in the same place, you can set them with different codes. Transmitting Frequency: 315MHz / 433MHz Working distance of transmitter and receiver with external extend antenna: 200M / 600ft (theoretically) Receiver: Model No.: S2T-DC06-ANT2 / S2T-DC09-ANT2 / S2T-DC12-ANT2 / S2T-DC24-ANT2 Channel: 2 CH Control Mode: Toggle (Press -> On; Press again -> Off) Coding Type: Fixed code Coding Setting: By learning Power Supply (Operating Voltage): DC6V (S2T-DC06-ANT2), DC12V±1V (S2T-DC12-ANT2), DC9V±1V (S2T-DC09-ANT2), DC24V±1V (S2T-DC24-ANT2) Working Voltage Range of Relay: AC110~240V or DC0~28V PCB size: 67mm x 50mm x 18mm Case size: 75mm x 54mm x 27mm Static Current: ≤6mA Maximum Working Current: 10A / each channel External Extend Antenna: Frequency Range: 300~450MHz Impedance: 50Ω Antenna Length: 15cm Cable Length: 150cm Weight: 35g Anti-interference, waterproof, shielded wire set inside Magnetic stand design for easy to install Transmitter: Model No.: C-2 Channel: 2 CH Remote Control Distance: 100m / 300ft (theoretically) Encode: Fixed code by Soldering Unit size: 58mm x 39mm x 16mm Power Supply: 1 x 23A -12V battery (included, can be used for 12 months) Usage: Initial state: A, B = Normally Closed; B, C = Normally Open. 1) Press button 1: Turn on relay 1 (connect B and C, disconnect A and B) 2) Press button 1 again: Turn off relay 1 (disconnect B and C, connect A and B) 3) Press button 2: Turn on relay 2 (connect B and C, disconnect A and B) 4) Press button 2 again: Turn off relay 2 (disconnect B and C, connect A and B) We have learned remote control to the receiver. If you don’t want the receiver to work with the remote control, you can delete all codes of remote controls, which are stored in the receiver. Operation: Press and hold the button of receiver until signal LED flashes slowly; release the button, LED keeps slow flash. That means all stored codes have been deleted successfully.