FOREDOM 1045 Manuals

Safety Instructions • ALWAYS wear proper eye and face protection. Safety glasses have been provided with your new Micro Motor. For your own protection, they should be worn (or a face shield) whenever you operate a Foredom® or any power tool to prevent serious eye or face injuries. • ONLY use accessories rated for 45,000 rpm or higher speeds when operating this micro motor. • ALWAYS find out the manufacturer's speed rating before using any accessory. • NEVER use or continue to use any accessory which appears to be damaged, loose, vibrating or out of balance. Inspect each accessory for cracks or flaws before using it. • ALWAYS insert the shank or arbor of an accessory or mandrel into the collet or chuck of the handpiece as far as possible in order to provide proper support and close the collet or chuck securely. • NEVER use excessive side pressures which may tend to bend or break the shank or arbor of an accessory. Let the speed of the accessory do the work. • DO NOT stall the motor by jamming or using excessive pressure on the mounted point, buff, wheel or accessory. This can result in damage to the motor. • WEAR a dust protector to prevent you from inhaling harmful dust or debris from grinding, carving or other operations performed with this power tool. A Micro Motor Handpiece is a high speed rotary power tool which can be dangerous and cause serious injury if it is not used properly. NEVER operate it without wearing eye protection. 2 Operation and Maintenance Manual for 1045 Micro Motor Kit FOREDOM ® For Your Safety: • Read this Manual before operating your Foredom Micro Motor Power Tool. • Always wear eye protection while using the Foredom Micro Motor Handpiece. FM3545 Control FC-2000 Foot Pedal MH-145A Handpiece 3/32″ & 1/8″ Collets, Spare Motor Brushes