Forney 410 Manuals

Adjust wire feed speed ( ) and voltage ( ) Flux- Cored * Face the appropriate groove towards the inside of machine Set drive roll Solid wire Connect to input power With contact tip 3/8” from metal, depress trigger completely to initiate arc Install wire spool 0.023” (0.6mm) - 0.035” (0.9mm) diameter 8” (200mm) wire spool 4” (100mm) wire spool Feed wire and set pressure Knob set ~2-3 marks Remove consumables and depress trigger until wire comes out. Replace consumables See chart on welder for correct settings FIND MORE INFORMATION AT FORNEYIND.COM 4. 5. 6. 7. 9. 10. 11. 8. Connect MIG gun and ground clamp QUESTIONS OR TROUBLE? Contact Forney Industries at 1-800-521-6038 [email protected] forneyind.com MIG QUICK START GUIDE 220 MP WELDER ITEM# 410 Set polarity for MIG (solid wire) or Flux-Cored Solid wire Flux-cored Read user manual 2. 3. 1. Select process Pressure knob NOTE: If using gas: 2. Attach hose to regulator and regulator to gas bottle 1. Attach gas hose to machine MIG Gun Ground Clamp • Generator OK with continuous output > 5,000 W (120V) or 10,000 W (230V) • Extension cord: #12 AWG (120V) or #8 AWG (230V) or larger. 25’ (8m) or shorter extension cords recommended