Forney Easy Weld 180 ST Manuals

• Generator OK with continuous output > 4,500 W (120V) or 10,000 W (230V) • Extension cord: #12 AWG (120V) or #8 AWG (230V) or larger. 25’ (8m) or shorter extension cords recommended. 120VAC, 20A outlet, 30A breaker recommended Connect to Input Power * TIG Torch sold separately 4. 6. Initiate the arc with a scratch or lift technique when in contact with the metal 7. Adjust amperage per material thickness Connect TIG torch lead to gas (100% Argon) 5. Connect TIG torch and ground clamp 3. ELECTRODE IS ALWAYS ELECTRICALLY HOT WHILE IN TIG MODE FIND TIG WELDING TIPS AT WWW.ASKFORNEY.COM TIG TROUBLESHOOTING TIPS QUESTIONS OR TROUBLE? Contact Forney Industries at 1-800-521-6038 [email protected] • askforney.com • forneyind.com Verify machine is plugged in and on. See manual. Both LED lights off Duty cycle exceeded or insufficient air flow. Allow machine to cool. Ensure vents are clear of obstacles. See manual. Both LED lights on • Usually due to low input power. • Welder should be only thing plugged into circuit. • Avoid using extension cords. If one must be used, it must be #10 AWG or larger; 25’ (8m) or shorter. • Generators must be 4,500 W continuous output and not have a low-idle function (or have it disabled). Low weld output or poor fusion Welder should be the only thing plugged into the circuit. Frequently tripping circuit breaker or exceeding duty cycle Connect ground clamp to clean, bare metal. No rust, paint or other coatings. Attach the ground clamp directly to the workpiece if you are experiencing issues. Workpiece grounding • Not recommended for this machine. • Output is DC only which is not recommended for TIG welding aluminum. Aluminum welding TIG QUICK START GUIDE 180 ST WELDER (NOT RECOMMENDED FOR ALUMINUM) ITEM# 291 Read user manual Select process 2. 1. DC ONLY EN_v1 TIG Torch Ground Clamp