Forney Easy Weld 261 Manuals

1 pdf manual(s) Forney Easy Weld 261 for free download (Document Types: Quick start manual)

Forney Easy Weld 261 Quick start manual [PDF] (6 pages)

  • Identifier: id-1510226
  • Brand: Forney
  • Device: Easy Weld 261 Welding System
  • Type: PDF
  • Key Aspects: Common Issue Diagnostic Flows, Pre-Deployment Preparation Steps, Periodic Inspection Checklists
  • UPD Date: 24.05.2026
  • Source File: 1488203.pdf
  • Pages: 6
  • Description: Installation and maintenance guide for the Forney Easy Weld 261.
Pages Preview:
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Adjust wire feed speed ( ) and voltage ( ) See chart on welder for correct settings Set drive roll Face the side marked 0.030” away from the machine • Generator OK with continuous output > 4,000 W • Extension cord: #12 AWG or larger; 25’ (8m) or shorter 120VAC, 20A outlet, 30A breaker recommended Connect to Input Power With contact tip 1/4” from metal, depress trigger completely to initiate arc Install wire spool 0.030” (0.8mm) diameter 8” (200mm) wire spool 4” (100mm) wire spool Feed wire and set pressure For proper tension align the tops of the screw and nut together Remove consumables and depress trigger until wire comes out. Replace consumables. FIND FLUX-CORED WELDING TIPS AT WWW.ASKFORNEY.COM 3. 4. 5. 7. 8. 6. QUESTIONS OR TROUBLE? Contact Forney Industries at 1-800-521-6038 [email protected] • askforney.com • forneyind.com QUICK START GUIDE 140 FC-i FLUX-CORED WELDER (DESIGNED FOR MILD STEEL WELDING ONLY) CAT# 261 Read user manual 2. 1. EN_v1-1 MIG Gun Ground Clamp 0.030”