Fortinet FortiAnalyzer-4000 Manuals

www.fortinet.com FortiAnalyzer Version 3.0 MR3 A D M I N I S T R A T I O N G U I D E

© Copyright 2006 Fortinet Incorporated. All rights reserved. Products mentioned in this document are trademarks or registered trade- marks of their respective holders. Regulatory Compliance FCC Class A Part 15 CSA/CUS 25 September 2006 Checking the Package Contents Connecting Planning the Configuration Ethernet Cables: Orange - Crossover Grey - Straight-through Documentation FortiAnalyzer-4000 Copyright 2006 Fortinet Incorporated. All rights reserved. Trademarks Products mentioned in this document are trademarks. Power Cable Back Front Power Connection UID Ethernet Connections Serial Connection Null-Modem Cable (RS-232) Q u i c k S t a r t G u i d e Power Connection UID Straight-through Ethernet cable connects to hub or switch on the network Null modem cable connects to serial port on management computer Place the FortiAnalyzer unit on a stable surface. It requires 1.5 inches (3.75 cm) clearance on each side to allow for cooling. Make sure the power is not plugged into the wall before connecting the power cable. The Status light flashes while the unit is starting up and remains lit when the system is up and running. • • • Connect the FortiAnalyzer unit to a power outlet and to the network hub or switch. FortiAnalyzer-4000 05-30003-0240-20060925 Connector Type Speed Protocol Description Ports 1 and 2 RJ-45 10/100Base-T Ethernet Connection to the network CONSOLE DB-9 9600 bps RS-232 serial Connection to the management computer. Provides access to the command line interface (CLI). You can add the FortiAnalyzer unit to your local FortiGate network to receive log messages from your local FortiGate units, or connect the FortiAnalyzer unit to the FortiGate units re- motely using FortiManager. To connect the FortiAnalyzer unit to the FortiGate units remotely, you must configure the DNS server and the default gateway. To manage the FortiAnalyzer unit, you can use a computer within the local network or over the Internet. Factory Defaults Administrator Account User name: admin Password: (none) Port 1 IP: 192.168.1.99 Netmask: 255.255.255.0 Management Access: ping, https, http, ssh Port 2 IP: 192.168.2.99 Netmask: 255.255.255.0 Management Access: ping, https, http, ssh