Fortinet FortiAnalyzer-800 Manuals

www.fortinet.com FortiAnalyzer Version 3.0 MR3 A D M I N I S T R A T I O N G U I D E

© Copyright 2007 Fortinet Incorporated. All rights reserved. Products mentioned in this document are trademarks or registered trade- marks of their respective holders. Regulatory Compliance FCC Class A Part 15 CSA/CUS 31 July 2007 Checking the Package Contents Connecting Planning the Configuration Back Ethernet Network Connections SCSI Connector For Tape Drive For Future Use RS-232 Serial Connection ATX Redundant Power Supplies Power Connection Power Switch Ethernet Cables: Orange - Crossover Grey - Straight-through Documentation FortiAnalyzer-800 Copyright 2006 Fortinet Incorporated. All rights reserved. Trademarks Products mentioned in this document are trademarks. Power Cable Null-Modem Cable (RS-232) Front LCD Panel Hard Disk LEDs Setting Switches A and B LED indicators: Power, Error, Network, and Disk Access Hard Disk LEDs Q u i c k S t a r t G u i d e Straight-through Ethernet cable connects to hub or switch on the network Null modem cable connects to serial port on management computer Power cable connects to power outlet Place the FortiAnalyzer unit on a stable surface. It requires 1.5 inches (3.75 cm) clearance on each side to allow for cooling. Make sure the power is not plugged into the wall before connecting the power cable. The Status light flashes while the unit is starting up and remains lit when the system is up and running. • • • Connect the FortiAnalyzer unit to a power outlet and to the network hub or switch. FortiAnalyzer-800 05-30005-0224-20070731 FortiAnalyzer Unit LED Indicators Light Icon Description The FortiAnalyzer power indicator. The FortiAnalyzer unit is powered on when the light is on. LED currently not in use. Network activity. The light flashes as network activity is occurring on the FortiAnalyzer unit. Hard disk activity. The light flashes as log packets are written to the For- tiAnalyzer hard disk, and when the FortiAnalyzer unit accesses the hard disk to generate reports. Connector Type Speed Protocol Description Ports 1 and 2 RJ-45 10/100Base-T Ethernet Connection to the network CONSOLE DB-9 9600 bps RS-232 serial Connection to the management computer. Provides access to the command line interface (CLI). You can add the FortiAnalyzer unit to your local FortiGate network to receive log messages from your local FortiGate units, or connect the FortiAnalyzer unit to the FortiGate units re- motely using FortiManager. To connect the FortiAnalyzer unit to the FortiGate units remotely, you must configure the DNS server and the default gateway. To manage the FortiAnalyzer unit, you can use a computer within the local network or over the Internet. Factory Defaults Administrator Account User name: admin Password: (none) Port 1 IP: 192.168.1.99 Netmask: 255.255.255.0 Management Access: ping, https, http, ssh Port 2 IP: 192.168.2.99 Netmask: 255.255.255.0 Management Access: ping, https, http, ssh