Fortinet FortiLog-400 Manuals

FortiLog Administration Guide 1 4 FortiLog-100 FortiLog-400 8 FortiLog-800 FortiLog Administration Guide Version 1.6 January 15, 2004 05-16000-0082-20050115

AC Adapter for FortiLog-100 Null-Modem Cable (RS-232) for FortiLog-800 Ethernet Cables: Orange - Crossover Grey - Straight-through Reset Switch LCD Panel 1 Setting Switches A and B Power Connection Power Switch LAN Front Back Front 4 Back LAN1 (Network Connection) Reset Switch ATX Redundant Power Supplies Power Connection Power Switch LCD Panel Setting Switches A and B LED indicators: Power, Error, Network, and Disk Access FortiLog-100 FortiLog-400 Front Back LAN1 (Network Connection) SCSI Connector For Tape Drive For Future Use RS-232 Serial Connection ATX Redundant Power Supplies Power Connection Power Switch LCD Panel Hard Disk LEDs Setting Switches A and B LED indicators: Power, Error, Network, and Disk Access 8 Hard Disk LEDs FortiLog-800 Accessories for each model LAN2 and LAN3 For Future Use LAN2 For Future Use Rack-Mount Brackets Documentation USER MANUAL FortiLog-100,400, 800 QuickStart Guide Copyright 2004 Fortinet Incorporated. All rights reserved. Trademarks Products mentioned in this document are trademarks. Power Cable 8 Esc Enter Esc Enter Esc Enter FortiGate unit FortiGate unit FortiGate unit Esc Enter Esc Enter Management PC Esc Enter FortiGate unit Internet Management PC Internal Network 8 FortiLog unit FortiGate units FortiMail unit 4 1 CONSOLE 2 PWE Straight-through Ethernet cable connects to hub or switch on the network Null modem cable connects to serial port on management computer Power cable connects to power outlet FortiLog-800 FortiLog-100 Straight-through Ethernet cable connects to hub or switch on the network Power cable connects to power supply LAN2 and LAN3 For Future Use FortiLog-400 Power cable connects to power outlet Straight-through Ethernet cable connects to hub or switch on the network The FortiLog units are network appliances that you can use to collect and analyze FortiGate log messages. The FortiLog family includes three models. Check the model number on the front panel of your FortiLog unit. All three models are shown in the picture here. • FortiLog-100, desktop model with one hard drive. • FortiLog-400, desktop model with four hard drives. • FortiLog-800, rackmount model with four hard drives. Connectors Connector Type Speed Protocol Description LAN for FortiLog-100 LAN1 for FortiLog-400 and 800 RJ-45 10/100Base-T (FortiLog-100 and 400) 10/100/1000Base-T (FortiLog-800) Ethernet Connection to the network. CONSOLE (FortiLog-800 only) DB-9 9600 bps RS-232 serial Connection to the management computer. Provides access to the command line interface (CLI). FortiLog unit LED Indicators LED State Description Power On The FortiLog unit is powered on. Off The FortiLog unit is powered off. LAN (back) Flashing Network activities at this interface. Off No link at the interface. Error On The FortiLog unit is in error condition. Off The FortiLog unit is running normally. Network (front) Flashing Network activities on the FortiLog unit. Off No network activities. Disk access Flashing Hard disk activities. Off No hard disk activities. Check that the package contents are complete. QuickStart Guide Checking the package contents 1 Things you need to know before installing the FortiLog unit. You can add the FortiLog unit to your local FortiGate network to receive log messages from your local FortiGate units. You can also connect the FortiLog unit to the FortiGate units remotely through the Internet. To connect the FortiLog unit to the FortiGate units remotely, you must configure the DNS server and the default gateway. To manage the FortiLog unit, you can use a computer within the local network or over the Internet. Factory Defaults Administrator account User name: admin Password: (none) LAN IP: 192.168.1.99 Netmask: 255.255.255.0 Management Access: HTTPS, Ping Planning the installation 2 Connecting the FortiLog unit 3 Connect the FortiLog unit to a power outlet and to the network hub or switch. • Place the unit on a stable surface. • If you have a FortiLog-800 unit, you can also mount it in a 19-inch rack. The units require 1.5 inches (3.75 cm) clearance on each side to allow for cooling. • Make sure the power switch on the back of the unit is turned off before connecting the power and network cables. © Copyright 2004 Fortinet Incorporated. All rights reserved. Trademarks Products mentioned in this document are trademarks or registered trademarks of their respective holders. Regulatory Compliance FCC Class A Part 15, CE, and UL 15 November 2004 For technical support please visit http://www.fortinet.com. FortiLog -100, 400, 800 1 8 4 01-12000-0083-20041115

Internet Ethernet Cables: Orange - Crossover Grey - Straight-through Front Back LAN1, LAN2, LAN3 (Network Connections) Reset Switch ATX Redundant Power Supplies Power Connection Power Switch LCD Panel Setting Switches A and B LED indicators: Power, Error, Network, and Disk Access Power Cable Documentation FortiLog-400 QuickStart Guide Copyright 2005 Fortinet Incorporated. All rights reserved. Trademarks Products mentioned in this document are trademarks. Power cable connects to power outlet Straight-through Ethernet cable connects to hub or switch on the network FortiLog unit LED Indicators Light Icon Description The FortiLog power indicator. The FortiLog unit is powered on when the light is on. Warning light. The light is on when a system or hardware malfunction occurs. Network activity. The light flashes as network activity is occurring on the FortiLog unit. Hard disk activity. The light flashes as log packets are written to the FortiLog hard disk, and when the FortiLog unit access the hard disk to generate reports. Check that the package contents are complete. QuickStart Guide Checking the package contents 1 Things you need to know before installing the FortiLog unit. You can add the FortiLog unit to your local FortiGate network to receive log messages from your local FortiGate units. You can also connect the FortiLog unit to the FortiGate units remotely through the Internet or using FortiManager. To connect the FortiLog unit to the FortiGate units remotely, you must configure the DNS server and the default gateway. To manage the FortiLog unit, you can use a computer within the local network or over the Internet. Factory Defaults Administrator account User name: admin Password: (none) Port 1 IP: 192.168.1.99 Netmask: 255.255.255.0 Management Access: ping, https, ssh, http Port 2 IP: 192.168.2.99 Netmask: 255.255.255.0 Management Access: ping, https, ssh, http Port 3 IP: 192.168.3.99 Netmask: 255.255.255.0 Management Access: ping, https, ssh, http Planning the installation 2 Connecting the FortiLog unit 3 Connect the FortiLog unit to a power outlet and to the network hub or switch. • Place the FortiLog unit on a stable surface. It requires 1.5 inches (3.75 cm) clearance on each side to allow for cooling. • Make sure the power is not plugged into the wall before connecting the power cable. • The Status light flashes while the unit is starting up and remains lit when the system is up and running. © Copyright 2005 Fortinet Incorporated. All rights reserved. Trademarks Products mentioned in this document are trademarks or registered trademarks of their respective holders. Regulatory Compliance FCC Class A Part 15, CE, and UL 09 September 2005 For technical support please visit http://www.fortinet.com. FortiLog-400 05-30000-0236-20050909