Friedrich X-Star XQ05L10A Manuals

X-Star Room Air Conditioners PURCHASER P.O. # DATE PROJECT LOCATION ENGINEER ARCHITECT SUBMITTED BY FOR APPROVAL FOR REFERENCE ITEM PLAN DESIGNATION QUANTITY COOLING BTU/H VOLTAGE FRIEDRICH MODEL XSTAR_SUBMITTAL_08 DIGITAL CONTROL FEATURES • 24-hour timer lets you program on/off times • 3 cooling speeds, plus fan-only setting • MoneySaver® setting saves energy by cycling the fan with the compressor • Smart Fan adjusts fan speed to maintain desired tem- perature • Unique Comfortwatch technology • Memory backup saves settings if power is interrupted DELUXE FEATURES • Ultraquiet operation • 8-way air flow control • Slide-out chassis for more permanent window or wall installation • Washable, antimicrobial filter for protection against fungal and bacterial growth • Heavy duty side curtains reduce exterior noise/ light • Rust proof base pan 5,500 to 11,700 BTU/h EERs up to 11.5 FITS WINDOWS– MINIMUM: 26” WIDE. MAXIMUM: 42” WIDE ONE TOUCH OPERATION REMOTE CONTROL 24 HR. TIMER MONEY SAVER FEATURE SMART FAN ANTIMICROBIAL FILTER SLIDE-OUT CHASSIS FITS WINDOWS– MINIMUM: 26” WIDE. MAXIMUM: 42” WIDE THE INDUSTRY’S SMALLEST SLIDE-OUT CHASSIS- MODEL XQ05 COMPACT SIZE FOR EASIER REMOVAL AND STORAGE | 5,500 to 11,700 BTU/h EERs up to 11.5

For complete operating instructions refer to your Installation & Operation Manual. 920-199-00 (7-06) TO START UNIT Touch the Power button. The unit will automatically be in regular COOLING mode with the temperature set at 75°F (24°C) and the fan speed at F1 (SLEEP). TO ADJUST TEMPERATURE COOLER – Touch and hold until the display shows the desired room temperature. WARMER – Touch and hold until the display shows the desired room temperature. TO ADJUST THE FAN SPEED Touch Fan Speed until the display shows the desired fan speed. F1 is the lowest setting (SLEEP SETTING / LOW), F2 is MED, F3 is HIGH, and SF is SMART FAN. With SMART FAN on, the fan speed will adjust automatically to maintain the desired comfort level. TO SET THE CLOCK TIME Touch Set Hour (Clock light on), then press or until the hour closest to the actual time appears in the display. Make sure you set A.M. and P.M. properly (P.M. is indicated by a red light in the upper left corner of the display). Minutes will NOT show on the display. 1 2 3 5 4 Quick Reference Guide For models with electronic controls only. Room Air Conditioner TO SET THE TIMER START TIME – After the clock time has been set, press Set Hour (Start Time light on) then press and until the hour you want the unit to come on appears in the display. STOP TIME – After the start time has been set, press Set Hour (Stop Time light on), then press and until the hour you want the unit to shut off appears in the display. Touch Timer On/Off (light on) to activate the timer function. Touch Timer On/Off (light off) to cancel the timer function. Once the on and off times have been selected, they will remain in memory. However, if the power is interrupted, set the clock time again. PM Temp/Hour Cool Money Saver® Fan Only Clock Start Time Stop Time Power Fan Speed Mode Timer On/Off Set Hour 1 2 3 4 5

Installation and Operation Manual Portable Chassis Models XQ05, XQ06, XQ08, XQ10, XQ12 EQ08, YQ07 RoomAir Conditioners 920-197-01 (04-08) Money Fan Timer Operation Set Hr. Stop Start Temperature Fan Cool On/Off Power Cooler Only Speed Saver® Warmer Low Cool High Cool Low Heat High Heat MAX COOL MAX HEAT Fan Only Off Allow 3 min. between restarts ! Model information can be found on the name plate. It is located on the front of the unit, on the left side directly below the controls. To register your room air conditioner, complete and mail the enclosed registration card or register on-line at www. ,e c n ein e v n o c erutufru o y ro F .)yln o A S U ( m o c.h cird eirf record the model information here. MODEL NUMBER SERIAL NUMBER PURCHASE DATE Register your air conditioner