Froling Turbomatic TMC 28-55 Manuals

Fröling Heizkessel- und Behälterbau Ges.m.b.H, Industriestrasse 12, A-4710 Grieskirchen Tel +43 (0) 7248 606-0 Fax +43 (0) 7248 606-600 [email protected] www.froeling.com Installation Instructions Turbomatic TMC 28-55 Be sure to read and comply with the operating instructions and safety instructions. Subject to technical change. Introduction Page 2 M1010108_en s I Dear customer, The FRÖLING Turbomatic wood chip boiler features a state-of-the-art design that conforms to all currently applicable standards and testing guidelines. Please read and follow the installation instructions. They contain safety instructions and comprehensive information relating to transporting, setting up and assembling the boiler. The constant further development of our products means that there may be minor differences from the pictures and content. If you discover any errors, please let us know. Subject to technical change. Delivery Certificate Keeping a record that the delivery was received correctly and collecting customer-specific data relating to the system allows us to respond quickly should problems arise. We would therefore ask you to confirm that you have received the product in good condition. Please send Fröling a copy of the delivery certificate, filled in and signed by the customer. Introduction Fröling Heizkessel- und Behälterbau Ges.m.b.H, Industriestrasse 12, A-4710 Grieskirchen Page 3 Tel +43 (0) 7248 606-0 Fax +43 (0) 7248 606-600 [email protected] www.froeling.com M1010108_en I Guarantee Conditions Our sale and delivery conditions generally apply. These conditions have been made available to customers, and customers have been made aware of them at the time of order completion. You can also find the guarantee conditions in the enclosed guarantee certificate. Address of manufacturer FRÖLING Heizkessel- und Behälterbau GesmbH Industriestraße 12 A-4710 Grieskirchen AUSTRIA TEL +43 (0)7248 606 0 FAX +43 (0)7248 606 600 E-MAIL [email protected] WEBSITE www.froeling.com Contents Page 4 M1010108_en s C 1 General Information 6 1.1 Notes on Standards 6 1.2 Design Information 7 1.2.1 Approval and obligation to report...................................................................... 7 1.2.2 Requirements for central heating water ............................................................. 7 1.2.3 Ventilation of boiler room ................................................................................ 7 1.2.4 Installing the heating system / Standards .......................................................... 8 Combination with storage tank ......................................................................... 8 Return feed lift............................................................................................... 8 1.2.5 Chimney connection/chimney system ................................................................ 9 Draught limiter............................................................................................... 9 Boiler data for constructing the flue gas system:................................................. 9 2 Technology 10 2.1 Turbomatic TMC 28-55 dimensions 10 2.2 Components and Connections 11 2.3 Technical specifications 12 Test data for operation with wood chips........................................................... 12 Test data for operation with pellets ................................................................. 13 3 Installation 14 3.1 Transport 14 3.1.1 Positioning................................................................................................... 14 3.1.2 Temporary storage ....................................................................................... 14 3.2 Setting up in the boiler room 14 3.2.1 Removing the boiler from the pallet ................................................................ 14 3.2.2 Moving the boiler in the boiler room ................................................................ 14 3.2.3 Minimum distances in the boiler room.............................................................. 15 3.2.4 General information for boiler room................................................................. 15 3.3 Assembly work 16 3.3.1 Installing the chamber in the boiler ................................................................. 16 3.3.2 Installing the stoker...................................................................................... 19 Installing the burn back flap drive (only with burn back flap) .............................. 20 3.3.3 Installing the induced draught fan................................................................... 21 3.3.4 Installing the WOS Drive ............................................................................... 22 3.3.5 Fitting the automatic heat exchanger ash removal (optional) .............................. 23 Conversion for ashcan on right ....................................................................... 23 Assembly work on boiler................................................................................ 24 3.3.6 Installing the combustion chamber overpressure sensor..................................... 26 3.3.7 Fitting switch cabinet and cable ducts.............................................................. 26 3.4 Electrical connection 28 3.4.1 Laying the cable ........................................................................................... 28 3.5 Connecting the thermal discharge safety device 29 3.5.1 Thermal discharge safety device sensor ........................................................... 29