Fujitsu fi-5530C - Document Scanner Manuals

Fujitsu SCSI Scanner Installation Procedures Windows NT 4.0 Rev051906A Page 1 of 9 If you are installing the following models by means of the SCSI interface then use this document. SP10C M3093GX\DG Fi-4530C Fi-5120C SP15C M3096GX Fi-4640S Fi-5220C SP600C M3097G\G+\DG M4097D Fi-5530C SP620C M3099G\GX\GH Fi-4750C\L Fi-5650C SP3091DC FI-4120C\C2 M4099D Fi-5750C SP3092DC Fi-4220C\C2 Fi-4860C Fi-5900C SP93GX Fi-4340C Fi-4990C If you are going to use the USB interface of a dual SCSI/USB model then use the USB scanner installation guide. For Scansnap models please use the Scansnap installation guide. Hardware requirements. You will need a PC system that meets our recommended specifications, an appropriate SCSI controller, and a SCSI cable (six foot recommended maximum). For recommended PC system specifications and SCSI controllers please reference the Scanner Hardware Reference page. You may also need your Operating System Disk. Step A: Installing the SCSI Host Adapter (Adaptec). 1. Shut down your PC and remove the case cover. 2. Locate a free PCI slot and remove the back plate if necessary. 3. Install the SCSI controller in an open PCI slot. Make sure that the card is seated completely in the slot and secured in the frame Warning! Failure to secure the SCSI controller in the PC can result in damage to the SCSI card, scanner, and/or your system. 4. Boot your PC without the scanner attached. Step B: Installing the SCSI drivers (Adaptec). Although Windows NT has driver support for your host adapter it does not support plug and play. Therefore the SCSI drivers will need to be loaded manually. Follow the instruction below to install the driver for your host adapter.

Fujitsu SCSI Scanner Installation Procedures Windows 95\98\98SE\ME\2000\XP Rev051906A Page 1 of 7 If you are installing the following models by means of the SCSI interface then use this document. SP10C M3093GX\DG Fi-4530C Fi-5120C SP15C M3096GX Fi-4640S Fi-5220C SP600C M3097G\G+\DG M4097D Fi-5530C SP620C M3099G\GX\GH Fi-4750C\L Fi-5650C SP3091DC FI-4120C\C2 M4099D Fi-5750C SP3092DC Fi-4220C\C2 Fi-4860C Fi-5900C SP93GX Fi-4340C Fi-4990C If you are going to use the USB interface of a dual SCSI/USB model then use the USB scanner installation guide. For Scansnap models please use the Scansnap installation guide. Hardware requirements. You will need a PC system that meets our recommended specifications, an appropriate SCSI controller, and a SCSI cable (six foot recommended maximum). For recommended PC system specifications and SCSI controllers please reference the Scanner Hardware Reference page. You may also need your Operating System Disk. Step A: Installing the SCSI Host Adapter (Adaptec). 1. Shut down your PC and remove the case cover. 2. Locate a free PCI slot and remove the back plate if necessary. 3. Install the SCSI controller in an open PCI slot. Make sure that the card is seated completely in the slot and secured in the frame Warning! Failure to secure the SCSI controller in the PC can result in damage to the SCSI card, scanner, and/or your system. 4. Boot your PC without the scanner attached. Step B: Installing the SCSI drivers (Adaptec). 5. When the New Hardware wizard comes up, allow Windows to finish installing the hardware files for the SCSI controller. 6. Then either install/update the ASPI drivers from the CD or go to www.adaptec.com, and click on the “search” tab. 7. For Windows 95\98 or ME scroll down to the “Enter key word or quoted phrase” box and type in “aspi32”. 8. Next scroll down to the drivers section, click on ASPI32 and follow the prompts to download it your desktop or a new folder. 9. Afterwards go to that location and double click on the "aspi32.exe" icon and follow the prompts. 10. When the message “ASPI is up to date” appears, reboot and go to the next step.

1 fi-4530C & fi-5530C CONSUMABLE REPLACEMENT AND CLEANING INSTRUCTIONS fi-4530C & fi-5530C CONSUMABLE REPLACEMENT AND CLEANING INSTRUCTIONS CG00000-718301 Revision C

for Fujitsu Scanners Cleaning and Consumable Replacement Instructions I Manual nstruction Versitec is a division of Cranel, Inc. fi-4530C & fi-5530C

Fujitsu SCSI (650) VRS Scanner Installation Procedures Windows ME\2000\XP If you are installing the following models by means of the Kofax 650 Adrenaline SCSI controller with/without a GSA-2 then use this document. M4097D-VRS M4099D-VRS Fi-4860C-VRS Fi-4990C Fi-5650C-VRS Fi-5750C-VRS If you do not have a 650 controller and are not going to use VRS then use the SCSI scanner installation guide. If you are going to use the optional video interface then use the video scanner installation guide. If you have an 850S/1700S controller and a GSA-1 interface then you must use the SCSI (GSA-1) VRS scanner installation guide. Hardware requirements. You will need a PC system that meets both Fujitsu’s and Kofax’s recommended specifications, a Kofax 650 Adrenaline controller and six foot (maximum) Wide SCSI 68- pin cable. For recommended PC system specifications and SCSI controllers please reference the Scanner Hardware Reference page. You may also need your Operating System Disk. Step A: Installing the VRS drivers. First boot your PC and install the Kofax VRS driver that shipped with the scanner. Special note: When installing the VRS driver and any other software that contains Kofax’s Image Controls pay close attention to the individual runtimes. It is strongly recommended that you install the oldest/lower runtime application first. Step B: Installing the Adrenaline 650 Adrenaline controller 1. Shut down your PC and remove the case cover. 2. Locate a free PCI slot and remove the back plate if necessary. 3. Install the SCSI controller in an open PCI slot. Make sure that the card is seated completely in the slot and secured in the frame. Warning! Failure to secure the SCSI controller in the PC can result in damage to the SCSI card, scanner, and/or your system. 4. Boot your PC without the scanner attached and check for errors. Make sure that the SCSI controller is listed as a 650 Adrenaline. If no errors proceed to the next step. Step C: Unlocking the shipping lock. If your model scanner does not have a flatbed then proceed to Step D. Rev052206A Page 1 of 3

imaging Achieve high productivity with the smallest A3 footprint in the duplex color departmental scanner market fi-5530C2 Color Departmental Scanner Attractive price, outstanding performance and exceptional reliability.  Affordable departmental scanner with a compact footprint (16” wide by 11.5” high) and true, 600-dpi resolution  Captures up to 50 pages per minute / 100 images per minute (landscape, 200dpi) in color, monochrome, and grayscale.  Ultrasonic double-feed detection ensures reliable scanning. Even with mixed batches of documents  Includes Adobe® Acrobat® 8 Standard, ScandAll Pro and Kofax® VRS®  Enhance productivity with Fujitsu service and support

Operator's Guide fi-5530C2 Image Scanner P3PC-1922-01ENZ0

imaging fi-5530C Color Departmental Scanner Attractive price, outstanding performance and the smallest A3 footprint in the color departmental scanner market.
Affordable departmental scanner with a compact footprint (16" wide by 11.9" high) and true, 600-dpi resolution
Captures up to 47 pages per minute / 94 images per minute (landscape, 200 dpi) in color, monochrome and grayscale
Ultrasonic double-feed detection ensures reliable scanning, even with mixed batches of documents
Includes Adobe® Acrobat® 7.0 software, ScandAll 21 and Kofax VRS
Enhance productivity with Fujitsu service and support

Operator's Guide fi-5530C Image Scanner P3PC-1352-01ENZ0