Fujitsu FTP-623DCL002 Manuals

FTP-623MCL400/FTP-623DCL002 I OVERVIEW This battery driven, micro line thermal printer provides high speed printing for 2-inch wide (58mm) paper. It is suitable for portable equipment that requires compact, light weight components. In addition to the interface board, a driving LSI (MCU + Gate Array) is also available. I HIGHLIGHTS • Driven by batteries (direct connect between thermal head and batteries) It can be driven by a broad range of voltages (4.2 to 8.5 V) of NiCd or Nickel-Hydrogen by using Fujitsu Components' unique head drive control system. The battery pack can be connected directly to the print head without a voltage regulator. Also, a lithium-ion battery can be used. • High speed printing It can print at approximately 23 character lines/s (460 dotlines/s = 57.5 mm/s). • Compact and lightweight It has a light weight of approximately 75 g. • Low power consumption The peak current for head driving is approximately 3.0 A. • Selectable paper paths Front, rear, and top paper insertion paths can be used. • Paper auto loading function Paper feeding is enabled by operating the head up lever. • Variety of suitable papers This model is suitable for printing on a variety of papers, including 1-ply roll paper, 2-ply paper (TCC and roll), labels, and long-life paper. BATTERY DRIVE, MICRO LINE THERMAL PRINTER 2” TYPE MECHANISM AND INTERFACE BOARD FTP-623MCL400 FTP-623DCL002 FTP-623CU001, FTP-633GA101 1