Fujitsu Stylistic 2300 Manuals

Stylistic 2300 is a trademark of Fujitsu Personal Systems, Inc. © 1998 Fujitsu Personal Systems, Inc. 9/98 58-0601-00A FMWSP6 Screen Protector Installation Instructions Stylistic 2300 The FMWSP6 screen protector can be installed on the Stylistic 2300 pen tablet display screen or on the display window of the FMWCC30 harsh environment case. Note the following: • Before installing a new screen protector, remove any screen protector that is already installed. (A notch in the corner of the screen protector allows you to slide your fingernail or a sharp implement under the screen protector for removal.) • To ensure good adhesion, clean the display screen with a soft cotton cloth dampened with denatured alcohol before installing the screen protector. 1. For installation on the Harsh Environment Case only: Remove edge from screen protector. 2. Peel protective film from adhesive side of screen protector. 3.Install the screen protector. Apply the adhesive side to the screen with the notch in the lower left corner. Apply pressure along the edge of the screen protector with your finger. (Avoid lifting the screen protector from the screen after it is installed. The adhesive requires 48 hours to cure.) 4.Remove the protective film from top of the screen protector. 5.Clean the exposed surface of the screen protector with a soft cotton cloth dampened with denatured alcohol to remove any adhesive left behind by the protective film.

Stylistic 2300 is a trademark of Fujitsu Personal Systems, Inc. © 1998 Fujitsu Personal Systems, Inc. 9/98 58-0587-00A FMWCC30 Harsh Environment Case Instructions Stylistic 2300 These instructions provide details on using the FMWCC30 harsh environment case (HEC) with the Stylistic 2300 pen tablet computer. When used with the pen tablet, the HEC provides added protection when transporting or using the pen tablet. Note the following: • To prevent scratches, a screen protector should be installed on the display window of the HEC. The order number for the Stylistic 2300 screen protector is FMWSP6 (12-pack). Refer to the instructions provided with the screen protector to install it on the HEC. • If the pen tablet will be used both with and without the HEC, any screen protector on the pen tablet can be left in place. However, if the pen tablet will be used only in the HEC, any screen protector on the pen tablet should be removed for better viewing. Installing Pen Tablet in Case 0 Pen Holder

Microsoft Corp. Exhibit 1020