Garmin GPSMAP 4208 - Marine GPS Receiver Manuals

Important Safety and Product Information Warnings Failure to avoid the following potentially hazardous situations could result in an accident or collision resulting in death or serious injury. If your unit contains or accepts mapping products, follow these guidelines to ensure safe navigating. When navigating, carefully compare information displayed on the unit to all available navigation sources, including information from visual sightings, local waterway rules and restrictions, and maps. For safety, always resolve any discrepancies or questions before continuing navigation. Use the electronic chart in the unit only to facilitate, not to replace, the use of authorized government charts. Official government charts and notices to mariners contain all information needed to navigate safely. • • Use this unit only as a navigational aid. Do not attempt to use the unit for any purpose requiring precise measurement of direction, distance, location, or topography. If your unit has video input capabilities, do not attempt to operate or watch video input while operating or navigating your boat. Operating or watching the video input while the boat is moving could cause an accident or collision resulting in property damage, serious injury, or death. NOTE: Refer to your product’s owner’s manual to determine if your product contains or accepts maps, or to determine if your product has video input capability. • • WARNING: This product, its packaging, and its components contain chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. This Notice is provided in accordance with California’s Proposition 65. See www.garmin.com/prop65 for more information.

GPSMAP® 4000/5000 Series owner’s manual

+ - Technical Reference for Garmin® NMEA 2000® Products

GPSMAP® 4000 Series owner’s manual

GPSMAP ® 4000/5000/6000/7000 Series Weather and XM ® Satellite Radio supplement

1 GPSMAP 4000/5000 Series Installation Instructions GPSMAP® 4000/5000 Series Installation Instructions The GPSMAP 4000/5000 series chartplotter and GPS 17 antenna must be properly installed according to the following instructions. You need the appropriate fasteners, tools, and mounts listed in each section. These items are available at most marine dealers. Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding. When drilling or cutting, always check what is on the opposite side of the surface. Mount the GPSMAP 4000/5000 series unit in a location that provides a clear, glare-free view of the display and easy operation of the controls or touch screen. If you experience difficulty installing the unit, seek the assistance of a professional installer; or contact Garmin Product Support by phone at 913/397.8200 or 800/800.1020, Monday–Friday, 8 AM–5 PM Central Time. Go to www.garmin.com/support/ and click on Product Support for more information. In Europe, contact Garmin (Europe) Ltd. at 44/0870.8501241. To install the GPSMAP 4000/5000 series unit: 1. Mount the unit. 2. Mount the antenna. 3. Connect the unit to power and to the antenna. 4. Ensure the unit software is up-to-date. Though they are not necessary to use the GPSMAP 4000/5000 unit, this manual covers other installation options: • Connect the unit to other network compatible Garmin devices, such as a sounder or radar. • Connect the unit to other NMEA 0183 compatible devices such as a VHF radio with DSC. • Connect the unit to an external alarm. • Connect the unit to a NMEA 2000 source (available on some boats) for various mechanical and navigation information. • Connect the unit to a video input source. • Connect the unit to an external video monitor. Surface Mounting the GPSMAP 4000/5000 Series Unit Tools required (not included): • Drill and drill bit • Screwdriver • Pencil • Mounting hardware (screws or nuts, washers, and bolts) Note: The mounting hardware (screws or nuts, washers, and bolts) are not included. The holes on the bail mount are 5/16" (7.9 mm) in diameter. Choose mounting hardware that fits the holes in the bail mount and best attaches it to your specific mounting surface. The size of the drill bit required depends on the mounting hardware chosen. July 2007 190-00779-02 Rev. C Printed in Taiwan

GPSMAP® 4000/5000 Series Installation Instructions The GPSMAP 4000/5000 series chartplotter and GPS antenna must be properly installed according to the following instructions. You need the appropriate fasteners, tools, and mounts listed in each section. These items are available at most marine dealers. Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding. When drilling or cutting, always check what is on the opposite side of the surface. Mount the GPSMAP 4000/5000 series chartplotter in a location that provides a clear, glare-free view of the display and easy operation of the controls or touch screen. If you experience difficulty installing the chartplotter, seek the assistance of a professional installer; or contact Garmin Product Support by phone at 913/397.8200 or 800/800.1020. Go to www.garmin.com/support. In Europe, contact Garmin (Europe) Ltd. at 44/0870.8501241. Before installing your GPSMAP 4000/5000 series chartplotter, confirm that the package contains the items listed on the box. If any parts are missing, contact your Garmin dealer immediately. WARNING: See the Important Safety and Product Information guide in the product box for product warnings and other important information. To install the GPSMAP 4000/5000 series chartplotter, you must: 1. Mount the GPSMAP 4000/5000 series chartplotter (page 1). 2. Mount the GPS antenna (page 5). 3. Connect the GPSMAP 4000/5000 series device to power and to the GPS antenna (pages 9–10). 4. Ensure the chartplotter software is up-to-date (page 20). Although they are not necessary to use the GPSMAP 4000/5000 chartplotter, this manual covers other installation options: • Connecting the chartplotter to other Garmin Marine Network compatible devices, such as a sounder or a radar (page 12). • Connecting the chartplotter to an existing NMEA 2000 network (page 10). • Connecting the chartplotter to other NMEA 0183-compatible devices such as a VHF radio with DSC (page 15). • Connecting the chartplotter to an external alarm (page 18). • Connecting the chartplotter to a video input source (page 19). • Connecting the chartplotter to an external video monitor (page 19). Mounting the GPSMAP 4000/5000 Series Chartplotter You can mount the GPSMAP 4000/5000 series chartplotters one of two ways. You can use the included bracket to bail mount the chartplotter, or you can use the included template and hardware to flush mount the chartplotter. Note: You cannot bail mount the GPSMAP 5015/5215 chartplotters. Because of the larger size, you must flush mount a GPSMAP 5015/5215 chartplotter. Bail Mounting the GPSMAP 4000/5000 Series Chartplotter Use the included bracket to bail mount the GPSMAP 4000/5000 series chartplotter. Tools required (not included): • Drill and drill bit • Screwdriver • Pencil • Mounting hardware (screws or nuts, washers, and bolts) Note: The mounting hardware (screws or nuts, washers, and bolts) are not included. The holes on the bail mount are 5/16 in. (7.9 mm) in diameter. Choose mounting hardware that fits the holes in the bail mount and securely attaches it to your specific mounting surface. The size of the drill bit required depends on the mounting hardware chosen. January 2008 190-00779-02 Rev. D Printed in Taiwan

DECLARATION of CONFORMITY Application of Council Directive: 1999/5/EC, 2004/108/EC Standard to which Conformity is Declared: EN 60945: 2002 Maritime Navigation and Radio Communications Equipment – General Requirements EN 60950-1:2001 Safety of Information Technology Equipment Manufactured by: GARMIN International & GARMIN Corporation Manufacture’s Address: 1200 E. 151st Street No.68, Jangshu 2nd Rd., Olathe, Kansas 66062 Shijr, Taipei County, U.S.A TAIWAN, R.O.C. Authorised Representative: GARMIN (Europe) Ltd Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9RB, U.K. Type of Equipment: Marine Navigation Equipment (Global Positioning System Receiver) Model Number(s): GPSMAP 4XXX SERIES GPSMAP 5XXX SERIES The undersigned does hereby declare that the equipment complies to the above Directives Paul Morrow Quality Manager GARMIN (Europe) Ltd Date: 16th June 2007 Issued: 16/06/2007 Revised: Page: 1 of 1

Printing a GPSMAP® 4000/5000 Series Flush Mount Template in Adobe Acrobat Notes: (A) You must print the template on 11˝x17˝ paper. This is normally selected in the ‘Printer Properties’, and will differ by manufacturer. • If your printer is not capable of printing on 11˝x17˝ paper, or you do not have 11˝x17˝ paper, you must print this template at an office services store or similar location that has the ability to print on 11˝x17˝ paper. (B) You must set the ‘Page Scaling’ setting to ‘None’. (C) Select ‘Auto-Rotate and Center’ to make sure the template prints in the correct orientation. Important Information: • Before cutting the mounting surface, measure the printout to make sure it printed at the correct size. Both the length and width measurements are noted on the template. Verify both the length and width measurements before cutting. • When cutting the Flush Mount template, cut inside the line, then sand and/or file the mounting surface to ensure a good fit. A B C Adobe Acrobat Print Dialog Box

GPSMAP® 4000 Series owner’s manual www.reelschematic.com www.reelschematic.com