GDS CSD-2 Manuals
1 pdf manual(s) GDS CSD-2 for free download (Document Types: Technical sheet)
GDS CSD-2 Technical sheet [PDF] (2 pages)
- Identifier: id-1792615
- Brand: GDS
- Device: CSD-2 Security Sensors
- Type: PDF
- Key Aspects: Standard Operating Procedures, Safety Recommendations and Warnings, Product Performance Metrics
- UPD Date: 17.08.2026
- Source File: 1747659.pdf
- Pages: 2
- Description: User operation guide for the GDS CSD-2.
Click to expand and read text
3 >30cm >30cm <7m - <5m - , , 5 - E: [email protected] T: 0113 286 0166 F: 0113 287 8178 GDS TECHNOLOGIES LTD | FUSION POINT | ASH LANE | GARFORTH | LEEDS | LS25 2GA | UK www.gds-technologies.co.uk T E C H N O L O G I E S OPTICAL SMOKE/HEAT DETECTOR & BASE Technical Sheet ref C1694A CSD-2 Sensor INSTALLATION 1. Choose the proper place for installation of the fire detector. Refer to the given installation instructions. Note: Do not install the detector near sources of steam, condensation or smoke and close to natural heat sources. 2. If you want to “lock” the detector to the base remove the little “tooth” (with the triangle shape) and break the plastic key off the base. Keep the plastic key in safe place to be able to open the detector later. 3. Mount the relay base on the ceiling of the protected premises using fixings according the mounting surface. 4. Connect the detector base to the intruder alarm panel using the wiring diagram. ATTENTION: Disconnect the main power supply before installing the detector! 5. Insert the detector into the base and rotate clockwise until it drops into place. Continue to rotate the detector until it locks to the base - a click is heard. 6. If the detector has been locked to the base, when opening it for a service schedule maintenance and cleaning you have to use the plastic key. Lightly press the plastic key into the base opening and at the same time rotate the detector head counterclockwise. ATTENTION: To clean the wire mesh you have to remove the detector’s PCB and then carefully to disassemble the smoke chamber from it. Clean the wire mesh and mount the chamber back on the PCB and observe the arrows - they have to coincide, then slightly press the chamber to the detector’s PCB. Next you have to mount the PCB back to detector’s plastic body. Find the color dot sticker on the PCB and orientate it to the mark on the plastic body (visible from the outside). The hole next to the color dot have to coincide with the pin on the plastic body. Gently press downwards to fix the PCB in place. TESTING THE DETECTOR To test the detector use a smoke probe: 1. Exert influence on the fire detector by smoke generator (Dispenser) or by aerosol simulator of smoke to test the optical part; or use heat tester (Cordless Heat Detector Tester or Heat Tester 110V>240V) at distance of 20 cm to test the heat part. Within 8 sec the fire detector will enter into fire condition. Both LEDs will light up. 2. Power off the detector for 2 sec. minimum. After resetting the detector will enter in duty mode and the LEDs will turn off. SERVICE MAINTENANCE 1. Inspection for visible physical damage - weekly. 2. Operational test in real conditions - monthly. 3. Check and clean dust contamination - six months. 4. Check and clean base and head contacts and connections - annually.
CSD-2: Related Instructions
Assembly instructions // Instruction manual grinding deserves SOLUTIONS SHARK 5-Jaw Chuck for ANCA machines Product setup manual for the GDS SHARK Industrial Equipment. This documentation explains configuration and operational safety, operating conditions, technical guidelines, device reset instructions.
E: [email protected] T: 0113 286 0166 F: 0113 287 8178 GDS TECHNOLOGIES LTD | FUSION POINT | ASH LANE | GARFORTH | LEEDS | LS25 2GA | UK www.gds User reference manual for the GDS 2000 Security System. This manual explains repair references, system parameters, hardware setup.
Hardware Ver. 07. 06. 2006 Usage and setup manual for the GDS VCI Medical Equipment. This manual covers assembly reference, hardware setup, reset instructions.
GDS Corp 1245 Butler Road League City, TX 77573 409-927-2980 409-927-4180 (Fax) www.gdscorp.com Operation and Maintenance Manual GDS-68XP Process M Official user manual for the GDS GDS-68XP Measuring Instruments. It provides guidance on basic operation, configuration options, system configuration, performance details.
Installation and Maintenance Manual Commercial Sliding Gate Operator Made in Australia from Australian & quality imported components Installation and Maintenanc Technical guide for the GDS GDS 240 PP Gate Opener. It offers guidance on menu navigation, user preferences, configuration options.
User Manual MAN10xxx-01 Product setup manual for the GDS Compuprint 2056 Printer. This reference includes operational safety, safety protocols, replacement parts.
Similar Manuals in the Security Sensors Category
Victoreen® 8000 NERO® mAx Users Manual December 2006 Manual No. 8000-100-1 Rev. 9 ©2006 Fluke Corporation, All rights reserved. Printed in U.S.A. All produc User and installation guide for the Fluke Biomedical Victoreen NERO mAx 8000 Security Sensors. It explains installation, setup, and troubleshooting tips, power requirements, connectivity options, diagnostic information.
ING. GIANNI SABATO Via S. Stefano 74, I-40125 Bologna GSM +39 335 238046 Ph. +39 051 6211553 Fax +39 051 3370960 E-mail: [email protected] Web: www.doingsec Installation and operation manual for the Gianni PRT62LT Security Sensors. The manual provides information on technical troubleshooting, error handling, basic operation, operational guidelines.
FIBARO DOOR/WINDOW SENSOR 2 FGDW-002 CONTENTS #1: Description and features 3 #2: Basic activation 4 #3: Adding/removing the device 5 #4: Physical installation 6 Instruction booklet for the FIBARO FGDW-002 Kitchen Appliances. The manual outlines system configuration and product specifications, hardware setup, operational procedures, power requirements.
OR-CR-261 ORNO-LOGISTIC Sp. z o.o. ul. Rolników 437 44-141 Gliwice tel. (+48) 32 43 43 110 Czujnik ruchu do puszki (EN) PIR Motion sensor (DE) Bewegungsmelder Product operation guide for the Orno OR-CR-261 Security Sensors. This guide offers instructions on troubleshooting guides, error handling, technical troubleshooting, device reset instructions.