GE JKP75SP Manuals

JKP75SP GE® 27" Built-In Convection/Thermal Wall Oven For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. Listed by Underwriters Laboratories 320363 Specification Created 5/09 KW Rating 240V 6.8 208V 5.1 Breaker Size 240V 30 Amps 208V 30 Amps Dimensions and Installation Information (in inches) Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating. Note: If marks, blemishes or the cutout opening is visible above the installed oven, it may be necessary to add wood shims under the runners and front trim until the marks or openings are covered. Note: Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle. Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions. Cab A – B – C – D E – Ove F – G H *De 10 Locate junction box for 27"models either 5" MIN. below cutout floor or 44" MIN. above cutout floor Access from adjacent cabinet required Allow 3/4" for overlap over all edges of cutout A Minimum cutout location from floor D E 2" X 4" or equiv. runners (cutout floor) 21" MIN. door opening allowance B C H F G Locate junction box for 24"models 56" MIN. above cutout floor Conduit (48-1/2" Long) 21 Cabinet 27" A – Cabinet width required 27" min. B – Minimum cabinet depth 23-5/8" C – Opening width 25" min. - 25-1/4" max D – Opening height 50-1/8" max E – Recommended minimum cutout location from floor 13-1/4" Oven F – Overall depth* 23-5/8" G – Overall height with trim 51-7/8" - 52-3/4" Overall height without trim 51" H – Overall width 26-5/8" *Depth including door handle is approximately 26-7/10" min. to 26-8/10" max. CL Suitable bracing to support runners 18" Over centerline of cabinet (must support 300 lbs.) 2" x 4" or equivalent runners 10 Allow 3/4" for overlap over all edges of cutout A X 4" or quiv. runners utout floor) 21" MIN. door opening allowance B C H F G Locate junction box for 24"models 56" MIN. above cutout floor Conduit (48-1/2" Long) 21 JKP75SP GE® 27" Built-In Convection/Thermal Wall Oven For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. Listed by Underwriters Laboratories 320363 Specification Created 5/09 JKP75SP 1 2 3 4 5 6 7 8 9 0 Features and Benefits • PreciseAir™ Convection System - A reversing fan circulates heat and air for evenly browned and baked foods • Glass Touch Oven Controls - Feature a smooth glass design that is both easy-to-operate and easy-to-clean • Convection Bake (upper oven only) - This setting is optimal for baking casseroles or lasagnas, yeast breads, pies and pizzas with no need to turn the pan • Convection Roast (upper oven only) - Optimal for larger cuts of meat, this setting rotates the heat around all sides, sealing in the juices, producing rotisserie results at up to 25% faster than a conventional oven • Flat Back Convection (upper oven only) - Convection fan system is only 1” deep to provide additional room for cookware • Hidden Bake Oven Interior - Conceals the lower oven bake element to eliminate hard-to-reach areas that collect food and spills for easy cleaning • Self-clean Oven - Self-clean allows you to spare yourself from the trouble and effort it takes to scrub the oven interior. The oven does all the work! • Heavy-duty Oven Racks - Tough, durable racks include 50% thicker crossbars for extra strength • Extra-large Oven Capacity - Enough room to cook an entire meal at once • Interior Oven Light - Bright interior light helps you check on the progress of your cooking • Model JKP75SPSS – Stainless steel