gen2 UP Manuals

1 pdf manual(s) gen2 UP for free download (Installation and user instructions manual)

(1) Documents:
gen2 UP Thumbnail

UP Installation and user instructions manual

  • Brand: gen2
  • Model: UP
  • Format: PDF
  • Key Aspects: Initial Startup Checklist, Device Specifications Overview, Documentation and Revision History
  • Updated: 04.05.2026
  • Source File: 1428490.pdf
  • Pages: 8
  • Description: Need to know more about your gen2 UP? This Installation and user instructions manual covers installation guide, service schedule, and also fault and error codes. National Office 216-898-0080 Page | 1 www.gen2office.com UP tables & worksurfaces (2-leg) Installation and User…
Document Preview & Text Transcription
National Office 216-898-0080 Page | 1 www.gen2office.com UP tables & worksurfaces (2-leg) Installation and User Instructions National Office 216-898-0080 Page | 2 www.gen2office.com Step 1: INSTALL FEET AND MOUNTING BRACKETS TO LIFTING COLUMNS • Use the provided machine screws. • Fasten the machine screws by hand and tighten using an allen wrench. NOTE: Both sides of the mounting brackets do not have the same size holes. The side with larger holes mounts to the lifting columns using the machine screws. The side with smaller holes mounts to the UP- table using wood screws. The machine screws do not fit through the smaller holes. National Office 216-898-0080 Page | 3 www.gen2office.com Step 2: INSTALL LIFTING COLUMN BASE ASSEMBLY TO THE UP-TABLE • Use the provided wood screws. • For UP-tables 60” and smaller – lifting column bases can be mounted at the table’s edge or with slight overhang. • For UP-tables larger than 60” – position lifting column bases 60” apart and mount with the same overhang on both sides (centered). Step 3: MOUNT CONTROL BOX AND HANDSET TO THE UP-TABLE • Use the provided wood screws. • The Control Box can be mounted anywhere on the underside of the UP- table. Mounting the control box tucked behind the left or right lifting column is most ideal. • The handset can be mounted anywhere on the underside of the UP-table’s front edge. Step 4: CONNECT CABLES • Connect lifting column bases and handset to the control box using the provided cables as per the following diagrams. Adhesive backed cable clips can be used to secure the cables and prevent sagging. Once clips are positioned, then secure with wood screws. National Office 216-898-0080 Page | 4 www.gen2office.com

UP: Related Instructions