Genebre 2934 Manuals

Edificio Genebre. Av. de Joan Carles I, 46-48 08908 L'Hospitalet de Llobregat. Barcelona (Spain) [email protected] - www.genebre.es GENEBRE S.A. FECHA DE REVISIÓN: 09/04/2021 NUMERO DE REVISIÓN: 2 1 INSTALLATION, OPERATION AND MAINTENANCE MANUAL Sanitary Line Check Valves Ref. GENEBRE: 2934 – 2935 – 2936 Edificio Genebre. Av. de Joan Carles I, 46-48 08908 L'Hospitalet de Llobregat. Barcelona (Spain) [email protected] - www.genebre.es GENEBRE S.A. FECHA DE REVISIÓN: 09/04/2021 NUMERO DE REVISIÓN: 2 2 Installation, operation and maintenance instructions 1. Breakdown drawing. .................................................................................. 3 1.1 List of components: ……........................................................................... 3 2. Storage ……………...................................................................................... 3 3. Installation instructions ………................................................................... 4 3.1 Preparation …........................................................................................... 4 3.2 Valve Installation ………...…................................................................... 5 4. Operation instructions ……....................................................................... 6 4.1 Usage ....................................................................................................... 6 5. Maintenance operations ............................................................................ 6 6. Reparation instructions .......................................................................... 7 6.1 Disassembling ............................................................................................... 7 6.2 Assembly ...................................................................................................... 7 7. Hygiene and Safety Instructions: ............................................................... 8 Edificio Genebre. Av. de Joan Carles I, 46-48 08908 L'Hospitalet de Llobregat. Barcelona (Spain) [email protected] - www.genebre.es GENEBRE S.A. FECHA DE REVISIÓN: 09/04/2021 NUMERO DE REVISIÓN: 2 3 1) Breakdown drawing. 1.1) List of components: Nº Name Material Surface Treatment Spare Part Code 1 Body S.S. AISI 304 / 316L ------ ------ 2 Body Cap S.S. AISI 304 / 316L ------ ------ 3* Gasket Silicone K2934** 4 Bush Guide S.S. AISI 304 / 316L ------ ------ 5* Spring AISI 301 ------ K2934** 6* Seat EPDM ------ K2934** 7 Stem S.S. AISI 304 / 316L ------ ------ 8 Clamp bracket lock S.S. AISI 304 Mechanical Polish ------ * Available spare parts ** For sizes 2” and 21/2” use code K2935 2) Storage During storage it is recommended to keep the product in the included protective wrapping to avoid damages or dirt accumulation. The wrap must not be removed until element is to be installed. As much as possible, it must be stored in a dry and clean environment. Edificio Genebre. Av. de Joan Carles I, 46-48 08908 L'Hospitalet de Llobregat. Barcelona (Spain) [email protected] - www.genebre.es GENEBRE S.A. FECHA DE REVISIÓN: 09/04/2021 NUMERO DE REVISIÓN: 2 4 Transport and storage of these devices must be done in their original wrapping. VISUAL INSPECTION Check whether during transport, unloading and placement, devices have suffered no damages. MECHANICAL INSPECTION Check whether all mobile parts of the different devices, as well as the screws and other elements, are accomplishing their purpose. If you notice any kind of anomaly during reception of the goods, contact immediately with GENEBRE in order to determine the possible responsibilities on the issue and make the devices fully operational. IMPORTANT NOTE: Before installing and/or manipulating these elements, READ CAREFULLY these instructions for use and OBSERVE all contained information. If you fail to understand any of their content, please contact GENEBRE, S.A. User is responsible for the safe use of these devices, as established in present instructions for use and in the specific technical documentation of the device. 3) Installation instructions 3.1) Preparation Remove any remains of packaging from the valve.