Gira eNet Manuals

2 pdf manual(s) Gira eNet for free download (Document Types: Operating instructions, Operating instructions manual)

Gira eNet Operating instructions [PDF] (3 pages)

  • Identifier: id-1738869
  • Brand: Gira
  • Device: eNet Adapter
  • Type: PDF
  • Key Aspects: Hardware Setup Instructions, Warranty and Service Information, Information on Regular Maintenance
  • UPD Date: 19.06.2026
  • Source File: 1801413.pdf
  • Pages: 3
  • Description: Instruction and reference manual for the Gira eNet.
Pages Preview:
  • 4 Information for electrically skilled persons 4.1 Fitting and electrical connection DANGER! Electrical shock when live parts are touched. Electrical shocks can be fatal. Before working on the device, disconnect the power supply and cover up live parts in the working environment. Mounting a panel-mounted housing eNet actuator or sensor is connected correctly. o Engage the adapter (3) on the eNet universal transmitter or energy sensor. o Insert the eNet dev
  • Open the housing Figure 3: Open the housing o Insert a screwdriver into the opening (7) and lever the housing lid outwards slightly (Figure 3). o Then push the screwdriver between the strain relief and the housing cover (8) and lever it upwards. i An engaged adapter (3) can be levered off with a screwdriver. To do this, apply the screwdriver in the area of the lock. 5 Appendix 5.1 Technical data Dimensions W×H×D 97×53×36 mm 5.2 Warranty The warranty is
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Installation adapter Mini housing Order No. : 5429 00 Operating instructions 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Danger of electric shock. Only use the housing for eNet devices. These instructions are an integral part of the product, and must remain with the end customer. 2 Device components Figure 1: Components, panel-mounted housing (1) Housing lid (2) eNet mini device (3) Adapter for eNet universal transmitter and energy sensor (4) Housing base (5) Terminal for looping the protective conductor (6) Strain relief 3 Function Intended use - Panel-mounted housing for eNet mini actuators and sensors - Installation in false ceilings and surface mounting Product characteristics - Fastening possible on DIN rail according to DIN EN 60715 1/3 32586002 20.01.2014 Installation adapter Mini housing 10499296 eNet

Gira eNet Operating instructions manual [PDF] (11 pages)

  • Identifier: id-1873551
  • Brand: Gira
  • Device: eNet Control Unit
  • Type: PDF
  • Key Aspects: Troubleshooting Information, Cleaning and Sanitization Methods, Component Longevity Optimization
  • UPD Date: 25.07.2026
  • Source File: 1849211.pdf
  • Pages: 11
  • Description: Device setup manual for the Gira eNet.
Pages Preview:
  • Intended use - Switching and brightness setting of luminaires with 1-10 V interface - Operation with suitable radio transmitters - Mounting in appliance box according to DIN 49073 in combination with a suitable cover. - Installation in surface-mounted housing or panel-mounted housing (accessories) for suspended ceilings Product characteristics - Switch-on brightness can be saved permanently - Minimum brightness can be saved permanently - Scene operation po
  • Figure 2: Connection example i Ensure that the control cable is of the appropriate type, cross-section and routing for the VDE specifications for 250 V cable, control voltage has basic insulation. i The control cable and load cable can be run in a shared cable, e.g. NYM J 5×1.5. o Connect actuator (5) and 1-10 V ballasts (6) as shown in the connection example (Figure 2). At the same time, note the information given by the manufacturers of the ballast. o I
  • o Switch on mains voltage. i The 1-10 V ballasts can be switched by briefly pressing the Prog button. Status-LED (3) lights up: switched on Status-LED (3) off: switched off o Perform commissioning. i In installation positions that are not easily accessible, turn the operating mode switch to position PC after commissioning and performing a function test. Subsequent changes to the device settings can thus be carried out with the aid of the eNet-Server withou
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Radio control unit 1-10V, 1-gang Mini Order No. : 5421 00 Operating instructions 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Serious injuries, fire or property damage possible. Please read and follow manual fully. Danger of electric shock. Always disconnect before carrying out work on the devise or load. At the same time, take into account all circuit breakers that supply dangerous voltage to the device or load. Danger of electric shock. Device is not suitable for disconnection from supply voltage. These instructions are an integral part of the product, and must remain with the end customer. 2 Device components Figure 1: Device components (1) Operating mode switch (2) Button Prog (3) Status LED (4) Measuring points for voltage measurement, terminals rear-mounted 3 Function System information This device is a part of the eNet system. High transmission reliability at a radio frequency of 868 MHz is achieved by the transmission behaviour and bidirectional data transfer. The range of a radio system depends on various external circumstances. The range can be optimised by the choice of installation location. This device complies with the requirements of the R&TTE Directive 1999/5/EC. Declaration of Conformity and further information on the eNet system can be found on our website. The device may be operated in all EU and EFTA countries. 1/11 32581002 13.03.2014 Radio control unit 1-10V, 1-gang Mini 10499448 eNet

Gira eNet: Adapter, Control Unit, Diagnostic Equipment Category Related Instructions

I-2533
ICP DAS USA I-2533
12.08.2026 7 pages

I-2533 CAN to Fiber Converter - QuickStart (Nov/2019) ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717 1 I-2533 CAN to Multi-Mode Fiber Converter Quick Start Guide 1. Introduction This quick start helps Comprehensive user handbook for the ICP DAS USA I-2533 Media Converter. This guide includes assembly reference, technical assistance, component overview, maintenance schedule.

VLT PROFIBUS DP MCA 101
Danfoss VLT PROFIBUS DP MCA 101
30.04.2026 20 pages

MAKING MODERN LIVING POSSIBLE Installation Guide VLT® PROFIBUS DP MCA 101 VLT® Frequency Converter FC 102 • FC 103 • FC 202 FC 301/302 • FCP 106 • FCM 106 vlt-drives.danfoss.com User and installation guide for the Danfoss VLT PROFIBUS DP MCA 101 Media Converter. This guide explains technical procedures for connectivity options, calibration steps, safety.

MXI
National Instruments MXI
16.06.2026 65 pages

MXI Getting Started with Your PCI-Based MXI-2 Interface for Windows 2000/NT/Me/98 PCI-Based MXI-2 Interfaces for Windows 2000/NT/Me/98 September 2001 Edition Part Number 323193A-01 User setup guide for the National Instruments MXI Recording Equipment. It explains maintenance and installation guides, software updates, maintenance guidelines, component overview.

celsius
VADO celsius
30.05.2026 4 pages

celsius Vado Wedmore Road, Cheddar, Somerset, England BS27 3EB tel 01934 744466. fax 01934 744345 [email protected] www.vado-uk.com Guarantee Customer/technical services For any technical or installation queries please contact Vado on 01934 745163 Quick start guide for the VADO celsius Control Unit. This guide elaborates on device features and detailing setup, safety precautions, menu navigation.