Globus New Media ECO Spot 35FC Manuals

ECO Spot 35FC User Manual Page 4 Copyright © 2010 Globus New Media LLC Page 4 Specifications Voltage (US Version) 90-130V, 50-60Hz, 0.38A, 41W Power factor 0.98 International Version 200-240V, 50Hz, 0.2A, 41W Ambient Operating Temperature -13 to 104°F (-25 to 40°C) Dimensions / Weight Fixture Body: 10in x 5.25in (254mm x 133mm) Yoke Base: 5.5in x 5.5in (140mm x 140mm) Yoke Height: 6in (127mm) Weight: 7lbs (3.1kg) Gobo Dimensions Metal or Glass Gobos and Dichroic filters Outer Diameter (OD): 37.5mm (1.47 in) Max. Image Diameter (ID): 25mm (1.0 in) Max Thickness 4mm (0.16 in) Replacement Lamp 35W HID MR16 Lamp with GU10 socket Philips MASTERColour CDM-Rm Mini Elite35W/930 GX10 10D Other product name: MC CDM-Rm Mini Elite 35W/930 GX10 10D ILCOS code: MRS/UB-35/30/1A-H-GX10 Order Code: HID35Eco Rated bulb life 12,000hrs Expected bulb life 8,000hrs Color temperature 3,000K Luminous Intensity 18,000cd Socket GX10 CRI 87-90 Lens Options  Standard 20 degree (included)  Narrow 10 degree  Wide 25 degree ECO Spot 35FC User Manual Copyright © 2010 Globus New Media LLC Page 1 Thank you for choosing an ECO Spot 35FC™ Gobo projector. This unit is equipped with a fan cooled 35W discharge light bulb, which delivers light output and long bulb life. Please read this manual before installing or operating this fixture, follow the safety precautions listed below and observe all warnings. Package Contents  Projector with power cord and integrated gobo holder and rotator  Light Bulb  Test Gobo Safety Information Handling Instructions ECO Spot 35FC™ User Manual  Do not look directly into the lamp, it can result in eye damage.  This product is not for household use, it presents risks of severe injury or death due to fire and burn hazards, electric shock, lamp explosion and falls.  Light fixtures should be installed and maintained only by qualified personnel with experience in lighting equipment and general electrical experience.  Always disconnect the unit from power and allow cooling down for 20 minutes before servicing.  Place your fixture at a suitable place with good air flow and keep flammable materials away.  Minimum distance to flammable materials = 1ft. (0.3m).  Minimum distance to illuminated surfaces = 3.3ft. (1.0m).  Provide a minimum clearance of 4in. (10cm) around air vents.  Don’t touch the hot surface during operation, use gloves if necessary.  Replace Lamps only with the same type other lamps may cause damage.  Always ground (earth) the fixture electrically.  Use only a power source that complies with local building and electrical codes and has both, overload and ground-fault protection.  Do not use the fixture if the power cable or power plug is in any way damaged, defective or wet, or if they show signs of overheating.  When suspending the fixture above ground level, verify that the structure can hold at least 10 times the weight of all installed devices.  Verify that all external covers and rigging hardware are securely fastened and use approved means of secondary attachment such as a safety cable.  Please unpack and carefully check for damage caused during transportation.  Make sure there are no flammable materials close to the fixture.  Do not touch the light bulb with bare hands, the oils can damage the bulb and can cause failure or explosion of the bulb.  After turning off the projector, it may take up to 15 minutes to restart. Use only genuine spare parts for part replacement.