Goldtouch Comfort Mouse Manuals

Pairing the Goldtouch Comfort Mouse 1. From Control Panel, double-click “Bluetooth Devices”. 2. From the Bluetooth Devices window, press the “Add” button. 3. Ensure the mouse is turned on and in pairing mode by pressing the recessed button on the bottom of the mouse. 4. From the Add Bluetooth Devices window, please follow the instructions, and click the checkbox next to “My device is setup and ready to be found.” 5. Once the device is detected, select the Goldtouch Comfort Mouse and click “Next”. 6. When prompted for a passkey, click the radio button for “Don’t use a passkey”. and click “Next”. 7. The wizard will connect to the device and the “Add Bluetooth Device” wizard will complete. To close the wizard, click “Finish”. Pairing the Goldtouch Comfort Mouse Ensure the mouse is turned on and in pairing mode by pressing the recessed button on the bottom of the mouse 1. From the Start screen, fetch the Charms bar, click the Settings icon, and click the Change PC Settings button. You can summon the Charms bar’s Settings pane in any of three ways: Mouse: Point the cursor at the screen’s top- or bottom-right corner. Keyboard: Press Windows+I and press Enter. Touchscreen: Slide your fnger from the screen’s right edge inward. 2. Press the Pairing Button on the bottom of the Mouse for 2-3 sec- onds, until the Red Sensor light it blinking to indicate pairing mode. 3. From the Devices category, click the Add a Device icon. 4. Once the device is detected, select the Goldtouch Comfort Mouse and click “Pair”. 5. The wizard will connect to the device and the “Add Bluetooth Device” wizard will complete. Wait until your computer tells you that the drivers have successfully installed before using your mouse. To close the wizard, click “Finish”. Goldtouch Bluetooth Mouse Install Guide The Goldtouch Comfort Mouse is designed to utilize Microsoft and Apple’s built-in support for Bluetooth devices. There are no third-party drivers required to use the Goldtouch Comfort Mouse. This Quick Install Guide will walk you through the steps required to pair your new Bluetooth mouse with your computer. The Goldtouch Comfort Mouse is compatible with any embed- ded or third-party Bluetooth adapter. If your computer has a built-in Bluetooth adapter, then the optional Goldtouch Bluetooth adapter is not required. To put the mouse in pairing mode, simply press the recessed button on the bottom of the mouse using a paperclip or the tip of a pen. 1. From the task bar, right click the Bluetooth icon and click "Add a Bluetooth Device," or go to PC Settings \ Bluetooth and Other Devices. 2. Press the Pairing Button on the bottom of the Mouse for 2-3 seconds until the Red Sensor light is blinking to indicate pairing mode. Note: You may or may not see a blinking sensor depending on your lighting conditions. 3. From the "Bluetooth and Other Devices" screen, click "Add Bluetooth or Other Device." Select the Goldtouch Bluetooth Mouse once it has been detected, then click "Pair." 4. When the Goldtouch Bluetooth Mouse shows "Connected," exit the screen and begin using your mouse. Pairing the Goldtouch Comfort Mouse Ensure the mouse is turned on and in pairing mode by pressing the recessed button on the bottom of the mouse 1. From System Preferences, click the Bluetooth icon located in the Internet and Wireless Section 2. Press the Pairing Button on the bottom of the Mouse for 2-3 seconds, until the Red Sensor light it blinking to indicate pairing mode. Note: You may or may not see a blinking sensor depending on your lighting conditions. 3. Click the button labeled “Set Up New Device”. 4. From the “Bluetooth Setup Assistant”, select the Goldtouch Com- fort Mouse once it has been detected, then click “Continue”. 5. Upon successful completion, the screen will display “Congratula- tions, your computer is now setup to use your Bluetooth mouse”. 6. Click “Quit. Windows 8 Mac OS X Windows 10 Windows XP SP2, SP3 Pairing the Goldtouch Comfort Mouse Ensure the mouse is turned on and in pairing mode by pressing the recessed button on the bottom of the mouse 1. From the Start Menu, select “Devices and Printers", or right-click the Bluetooth icon on the task bar and select "Add a Bluetooth Device." 2. Press the Pairing Button on the bottom of the Mouse for 2-3 seconds until the Red Sensor light is blinking to indicate pairing mode. Note: You may or may not see a blinking sensor depending on your lighting conditions. 3. Click “Add a Device”. 4. From the “Add a Device” window, select the Goldtouch Comfort Mouse once it has been detected, then click “Next”. 5. Upon successful completion, the screen will display “This device has been successfully added to this computer." 6. Click "Close." Windows 7 NOTE: For all operating systems, if a security policy requires you to enter a Passkey, enter “0000”. Pairing the Goldtouch Comfort Mouse Ensure the mouse is turned on and in pairing mode by pressing the recessed button on the bottom of the mouse

GOLDTOUCHMOUSE Bluetooth Quick Installation Guide © 2011 Keyovation, LLC. All rights reserved. Goldtouch, the Goldtouch logo and Productivity through Prevention® are registered trademarks of Key Ovation, LLC Windows XP SP2, SP3 Pairing the Goldtouch Comfort Mouse 1. From Control Panel, double-click “Bluetooth Devices”. 2. From the Bluetooth Devices window, press the “Add” button. 3. Ensure the mouse is turned on and in pairing mode by pressing the recessed button on the bottom of the mouse. 4. From the Add Bluetooth Devices window, please follow the instruc- tions, and click the checkbox next to “My device is setup and ready to be found.” 5. Once the device is detected, select the Goldtouch Comfort Mouse and click “Next”. 6. When prompted for a passkey, click the radio button for “Don’t use a passkey”. and click “Next”. 7. The wizard will connect to the device and the “Add Bluetooth De- vice” wizard will complete. To close the wizard, click “Finish”. Windows 7 Pairing the Goldtouch Comfort Mouse Ensure the mouse is turned on and in pairing mode by pressing the recessed button on the bottom of the mouse 1. From the Start Menu, select “Devices and Printers”. 2. Click the button labeled “Add a Device”. 3. From the “Add a Device” window, select the Goldtouch Comfort Mouse once it has been detected, then click “Next”. 4. Upon successful completion, the screen will display “This device has been successfully added to this computer.”. 5. Click “Close”. Goldtouch Bluetooth Mouse Quick Install Guide The Goldtouch Comfort Mouse is designed to utilize Microsoft and Apple’s built-in support for Bluetooth devices. There are no third-party drivers required to use the Goldtouch Comfort Mouse. This Quick Install Guide will walk you through the steps required to pair your new Bluetooth mouse with your computer. The Goldtouch Comfort Mouse is compatible with any imbedded or third-party Bluetooth adapter. If your computer has a built-in Bluetooth adapter, then the optional Goldtouch Bluetooth adapter is not required. To put the mouse in pairing mode, simply press the recessed button on the bottom of the mouse using a paperclip or the tip of a pen. Windows Vista Pairing the Goldtouch Comfort Mouse Ensure the mouse is turned on and in pairing mode by pressing the recessed button on the bottom of the mouse 1. From the Control Panel, open the “Network and Internet” section. 2. Under “Bluetooth Devices” click “Set up a Bluetooth enabled device. 3. From the Bluetooth Devices window, press the “Add” button. 4. From the Add Bluetooth Devices window, follow the instructions, and click the checkbox for “My device is setup and ready to be found.”. 5. Once the device is detected, select the Goldtouch Comfort Mouse and click “Next”. 6. When prompted for a passkey, click the radio button for “Don’t use a passkey”. and click “Next”. 7. The wizard will connect to the device and the “Add Bluetooth De- vice” wizard will complete. To close the wizard, click “Finish”. Mac OS X Pairing the Goldtouch Comfort Mouse Ensure the mouse is turned on and in pairing mode by pressing the recessed button on the bottom of the mouse 1. From System Preferences, click the Bluetooth icon located in the Internet and Wireless Section 2. Click the button labeled “Set Up New Device”. 3. From the “Bluetooth Setup Assistant, select the Goldtouch Comfort Mouse once it has been detected, then click “Continue”. 4. Upon successful completion, the screen will display “Congratula- tions, your computer is now setup to use your Bluetooth mouse”. 5. Click “Quit.