GoVideo DV1040 Manuals

Read Me First Unpacking & Basic Connections for Cable Box and other advanced connection please refer to the User’s Guide DV1040 Antenna/Cable DVD+VCR Television UNPACK YOUR DVD+VCR • DV1040 DVD+VCR (1) • Remote control (1) • 1.5V AAA alkaline batteries (2) • RF (Antenna) cable (1) • Audio/video cable (1) • User’s guide (1) • Quick reference guide (1) • Product registration card (1) INSERT REMOTE CONTROL BATTERIES 1 Remove battery cover on back of remote control. 2 Insert two 1.5V AAA batteries, paying attention to the correct polarities (+/-). 3 Replace cover. BASIC CONNECTIONS 1 Connect your antenna or cable TV wall outlet to the IN (FROM ANT.) jack on the DVD+VCR rear panel. 2 Connect the OUT (TO TV) jack on the DVD+VCR rear panel to your TV’s Antenna Input using the supplied RF antenna cable. OR For improved picture quality, connect the VIDEO OUT jacks on the back panel of the DVD+VCR to your TV's Line In jacks using the supplied audio/video cable. 3 Plug in the DVD+VCR. 4 Press the POWER button on the remote control or front panel of the unit. 5 Press the POWER button on your TV. AUTO SEARCH FOR CHANNELS 1 Press SETUP to display the SETUP menu. 2 Use the / buttons to select CHANNEL SET and press ENTER. 3 Use the / buttons to select AUTO CHANNEL SEARCH and press ENTER. 4 Use the / buttons to select “Detect Automatically” and press ENTER. • Auto Channel Search detects whether you are using an Antenna or Cable TV and memorizes all available channels automatically. This may take several minutes. • When Auto Channel Search is complete, the DVD+VCR will display the lowest channel found. 5 To browse memorized channels, press the CH+/- buttons. 1 2 3 4 A/V IN ANT. IN POWER DV1040 PLAY REW STOP FF DVD EJECT VCR EJECT VIDEO 2 IN VIDEO REC L - AUDIO - R DVD VCR CH For cable box or satellite receiver connections, please see page 13 of the user’s guide. 6 Set your TV to Channel 3. If you used the Video Out connections, set your TV to its line or video input. • You must use either the Antenna or Line connection between your TV and DVD+VCR, even if you plan to use the S-Video or Component Video Output for improved DVD picture quality. The S-Video and Component Video Outputs are for DVD playback only! OR [

©2004 GoVideo. All rights reserved. Specifications subject to change without notice. revised 3.22.04 The GoVideo Experience: Innovation, Simplicity, Value, Support. DVD+VCR DUAL-DECK DV1040 Enjoy GoVideo innovation – AutoPlay™ skips ads and menus and goes to right to the start of the movie Progressive Scan delivers highest quality DVD video on your digital TV Record to VHS – While watching a DVD Versatile Entertainment – Plays VHS Tape, DVDs, DVD-R/RW, DVD+R/RW, Music CDs, MP3 audio and JPEG image files on CD-R/RW Easy one-wire (RF) hookup to playback VHS and DVD Component, S-Video, composite, and RF video outputs and a cable ready tuner Dolby Digital® and DTS digital audio output Virtual surround (3D Surround) One remote operates DVD and VCR All-in-one convenience – Progressive Scan DVD player + 4-Head Hi-Fi VCR.

DV1040