Grandstream Networks HT-286 Manuals

Grandstream Networks, Inc. HT–286 Analog Telephone Adaptor HT–286 User Manual www.grandstream.com Firmware Version 1.1.0.31 [email protected]

Commonly Asked Questions My HandyTone does not work. 1. Check to ensure you have broadband connectivity. For the HT to work, you must have internet connectivity. If you are unable to browse the internet, contact your Internet Service Provider to troubleshoot your connection. 2. The HT generates its own dial tone. If you do not hear a dial tone, check to see your HT is powered and your phone is directly connected to the HT via a phone line into the ‘phone’ port. I hear a dial tone, but I can not place a call. Router: ensure the Ethernet cable is connected to both the HT and the router via the LAN/WAN ports. Verify green LED status for both the router port and the HT LAN port. If there is no green light, connect to an alternate port and/or replace the Cat 5 RJ-45 cable connecting the two devices. No Router: Verify green LED status for the HT WAN port and the modem port. If there is no green light, re- connect the devices and/or replace the Cat 5 RJ-45 cable connecting the two devices. Still need help? Contact your local provider / retail outlet for support. You will need to know your type of internet connection, and your router/modem name and model. Equipment Packaging & Overview 1. Power Cable This plugs into your HT and the wall outlet. 2. WAN Port (RJ-45) Customer Router: connect the WAN port with an Ethernet cable to an available port on the router. No Router: Connect the Ethernet cable from the cable/DSL modem to this port. 3. LAN Port* (RJ-45) Customer Router: Not used No Router: connect the LAN port with an Ethernet cable to your modem Ethernet port. 4. Phone Port (RJ-11) Connect a phone line into this port for multiple lines (fax, additional phones). You can purchase a phone splitter from a home improvement store. 5. Line (RJ-11) This port can be used if you have existing phone service from a local telephone company. This can be used in case of emergency or for backup. Standard Set-up Grandstream HT Series HT-286/386 does not have a LAN Port. Follow Standard Set-up. Do not plug in the HT until instructed. 1. Unplug the cable/DSL modem and turn-off your computer. 2. Disconnect the Ethernet cable from your computer and plug it into the WAN port of the HT. 3. Connect the second Ethernet cable (included in package) to both the computer’s Ethernet port and the HT Lan port. 4. Connect your telephone to the ‘phone’ port in the back of the HT using a phone line. 5. Power on the Cable/DSL modem. Wait until the modem is fully powered before continuing with set- up. (all lights green) 6. Plug in the HT. Be sure the HT is plugged in as well. 7. Turn on your computer. Verify HT is powered and LED is green. (approximately 5 minutes to upgrade firmware) 8. Now you must configure your HT with the ITSP of choice. Router Set-up Grandstream HT Series Do not plug in the HT until instructed. Router set-up requires an additional LAN port on your router. 1. Connect the Ethernet cable (included in package) to both the router’s LAN port and the HT Wan port. 2. Connect your telephone to the ‘phone’ port in the back of the HT using a phone line. 3. Power on the Cable/DSL modem and router. Wait until the modem and router is fully powered before continuing with set-up. (all lights green – usually two minutes) 4. Plug in the HT. Be sure the HT is plugged in as well. 5. Turn on your computer. Verify HT is powered and LED is green. (approximately 5 minutes to upgrade firmware) 6. Now you must configure your HT with the ITSP of choice. 7. If necessary, reboot your router/modem. RJ11 FXS Port (Phone) RJ-45 10M Ethernet LAN/WAN RJ11 FXS Port (Phone) +5V/1200mA HT Quick Instal HT Quick Install Guide Page 3 HT Quick Install Guide Page 4 HT Quick Install Guide Page 5 l Guide Page 2

User Manual HandyTone-286 Rev 3.0 Analog Telephone Adaptor For Firmware Version 1.0.8.32 Grandstream Networks, Inc. www.grandstream.com

Product Related Questions HandyTone Series FAQs Q: What are the main differences between the 7 models of Handytones? Features HT286 HT386 HT486 HT488 HT503 HT496 HT502 Ethernet Ports 1 RJ45 (LAN) 1 RJ45 (LAN) 2 RJ45 (LAN/WAN ) 2 RJ45 (LAN/WAN ) 2 RJ45 (LAN/WAN ) 2 RJ45 (LAN/WAN ) DHCP/NAT/Route r No No Yes Yes Yes Yes FXS Port 1 2 1 1 2 2 FXO Port No No No 1 No No PSTN Pass- through Port No Yes Yes Yes No No Remote Configuration TFTP/HTT P TFTP/HTT P TFTP/HTTP TFTP/HTTP TFTP/HTTP TFTP/HTTP Q: Can you explain the use of 'PSTN pass through' and 'FXO port'? PSTN Pass through port: What it can do:  Local manual switching between PSTN and IP mode on a per call basis.  User can switch to PSTN line by pressing *00 (or the configured strings) for each call before they are placed. The device will revert back to the default IP mode once the phone is hung up.  It can allow a PSTN call to ring/call the phone connected to the FXS port.  It also serves as a life line in case of power outage. What it CANNOT do:  Terminate a VoIP call into the PSTN port  Allow a call from PSTN to route other VoIP devices (different from the FXS phone) over the IP network  Automatically route calls made by the local user to PSTN line Note: On the HT486 Rev 1.0, the PSTN port is only a life line port that switches to the PTSN network only when there is a loss of power. FXO port: It can support all the functions of a PSTN pass through plus:

Note: The test report is specially limited to the use of the above client company and the product model. It may not be duplicated without prior written consent of Bay Area Compliance Laboratory Corporation. This report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S. Government FCC PART 15 CLASS B EMI MEASUREMENT AND TEST REPORT For Grandstream Networks,Inc. 5th Floor, R2-A Building, South District of Hi-Tech Industrial Park, Shenzhen, P. R. China, P. C. 518057 Model: HT-286 November 7, 2003 This Report Concerns: Original Report Equipment Type: HT-286 Line Adapter Test Engineer: Jandy Su Report Number: RSZ03101401 Test Date: November 7, 2003 Reviewed By: Prepared By: Bay Area Compliance Lab Corp. ShenZhen Suite C, 41-D Electronics Science & Technology Building, No. 2070 Shennanzhong Rd ShenZhen, Guandong 518031, P.R. China Tel: (755) 83296449 Fax: (755) 83273756 PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com

Grandstream Networks, Inc. HT–286 Analog Telephone Adaptor HT–286 User Manual www.grandstream.com Firmware Version 1.1.0.31 [email protected]