Grandstream Networks HT801 Manuals

Grandstream Networks, Inc. HT801 Analog Telephone Adaptor Administration Guide

Grandstream Networks, Inc. HT801/HT802 Analog Telephone Adaptors Administration Guide

Grandstream Networks, Inc. HT801/HT802 Analog Telephone Adaptors Administration Guide

For Warranty and RMA information, please visit www.grandstream.com HT801 Analog Telephone Adaptor Quick Installation Guide Grandstream Networks, Inc. 126 Brookline Ave, 3rd Floor Boston, MA 02215. USA Tel : +1 (617) 566 - 9300 Fax: +1 (617) 249 - 1987 www.grandstream.com

Grandstream Networks, Inc. HT801 Analog Telephone Adaptor Quick User Guide For detailed information please consult HT801 administration or user guides available at: www.grandstream.com ©2016 Grandstream Networks, Inc. All rights reserved. Reproduction or transmittal of the entire or any part, in any form or by any means, electronic or print, for any purpose without the express written permission of Grandstream Networks, Inc. is not permitted. Information in this document is subject to change without notice BASIC OPERATIONS OBTAINING HT801 IP ADDRESS The HT801 is by default configured to obtain the IP address from DHCP server where the unit is located. In order to know which IP address is assigned to your HT801, you can access to the “Interactive Voice Response Menu”. Please refer to the steps below: 1. Use a telephone connected to phone port of your HT801. 2. Press *** (press the star key three times) to access the IVR menu and wait until you hear “Enter the menu option“. 3. Press 02 and the current IP address will be announced. ACCESSING THE WEB UI 1. Connect the computer to the same network as your HT801. 2. Make sure the HT801 is up and running. 3. You may check your HT801 IP address using the IVR on the connected phone. Please see Obtain the HT801 IP address via the connected analogue phone 4. Open Web browser on your computer. 5. Enter HT801’s IP address in the address bar of the browser. 6. Enter the administrator’s password to access the Web Configuration Menu. Note: The computer must be connected to the same sub-network as the HT801. This can be easily done by connecting the computer to the same hub or switch as the HT801. CONFIGURING HT801 THROUGH VOICE PROMPTS HT801 has a built-in voice prompt menu for simple device configuration. To use IVR: Pick up the handset and dial “***” to use the IVR menu. Please refer to the user manual for more information about IVR and how to access its menu options. REBOOTING HT801 Using Web UI 1. Access HT801 web interface. 2. Press “Reboot” button in the bottom of the page. Using IVR 1. Pick up the handset and dial “***” to use the IVR menu. 2. Press 99 to access reset/reboot menu. 3. Press 9 once IVR prompt is played. 4. “Rebooting” IVR will be played and HT801 will reboot. CALLS OPERATIONS PLACING A PHONE CALL To make the outgoing calls using your HT801. 1. Pick up the handset of the connected phone. 2. Dial the number directly and wait for 4 seconds (Default “No Key Entry Timeout”); or 3. Dial the number directly and press # (“Use # as dial key” must be configured in web configuration). DIRECT IP CALLS Direct IP calling allows two parties, that is, a FXS port with an analog phone and another VoIP Device, to talk to each other in an ad hoc fashion without a SIP proxy. To complete a Direct IP Call:  Both HT801 and other VoIP Device, have public IP addresses, or  Both HT801 and other VoIP Device are on the same LAN using private IP addresses, or  Both HT801 and other VoIP Device can be connected through a router using public or private IP addresses (with necessary port forwarding or DMZ). The HT801 support two ways to make Direct IP Calling: Using IVR 1. Pick up the analog phone then access the voice menu prompt by dialing ***. 2. Dial “47” to access the direct IP call menu. 3. Enter the IP address after the dial tone and voice prompt “Direct IP Calling”. Using Star Code 1. Pick up the analog phone then dial “*47” (No dial tone will be played). 2. Enter the target IP address. Notes:  Destination ports can be specified using “*” (encoding for “:”) followed by the port number.  IP address convention example: If the target IP address is 192.168.0.160, the dialing convention is 192*168*0*160.

Grandstream Networks, Inc. HT801 Analog Telephone Adaptor User Guide

Grandstream Networks, Inc. HT801/HT802 Analog Telephone Adaptors User Guide