Greenheck CFSD-211 Manuals

FSD-XXX, DFD-XXX, DFDTF-XXX CFSD-XXX, SEDFD-XXX, SEFSD-XXX, IMO-XXX, anD SSFSD-XXX SErIES 1 1⁄2 and 3 Hour Fire & Combination Fire Smoke Dampers (with factory installed sleeve and actuator) Vertical and Horizontal Mount Part number 461336 Safety Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating, and maintenance instructions thoroughly before installing or servicing this equipment. This manual is the property of the owner, and is required for future maintenance. Please leave it with the owner when the job is complete. Typical Actuator RRL Control Device Standard Warranty Greenheck warrants this equipment to be free from defects in material and workmanship for a period of one year from the purchase date. Any units or parts which prove to be defective during the warranty period will be repaired or replaced at our option. Greenheck shall not be liable for damages resulting from misapplication or misuse of its products. Greenheck will not be responsible for any installation or removal costs. Greenheck will not be responsible for any service work or backcharges without prior written authorization. Due to continuing research, Greenheck reserves the right to change specifications without notice. “UL CLaSSIFIED (see complete marking on prod- uct)” “UL CLaSSIFIED to Canadian safety standards (see complete marking on product)” UL Standard 555 & 555S (Classification #R13317) FSD-XXX, SEFSD-XXX, SSFSD-XXX, DFD-XXX, SEDFD- XXX, and CFSD-XXX Series Dampers are intended for installation in accordance with combination fire smoke damper requirements established by: national Fire Protection association NFPA Standards 80, 90A, 92A, 92B, 101, & 105 IBC International Building Codes new York City (MEA listing #260-91-M) California State Fire Marshal (Listing #3225-0981:103) & (Listing #3230-0981:104) - FSD models; (Listing #3225-0981:103) - DFD models; (Listing #3230-0981:105) & (Listing 3225-0981:106) - CFSD models; (Listing #3225-0981:109) & (Listing 3230-0981:110 ) - SSFSD models receiving and Handling Upon receiving dampers, check for both obvious and hidden damage. If damage is found, record all necessary information on the bill of lading and file a claim with the final carrier. Check to be sure that all parts of the shipment, including accessories, are accounted for. Dampers must be kept dry and clean. Indoor storage and protection from dirt, dust and the weather is highly recommended. Do not store at temperatures in excess of 100°F (38°C). Installation, Operation and Maintenance Instructions Installation Supplements Refer to the appropriate Greenheck installation supplements for special requirements: � •�Concrete�Floor�with�Steel�Deck � •�Drive�Slip�Breakaway�Connection � •�Field�Installed�Sleeve � •�Fire�Resistant�Ventilated�Duct�Assembly � •�Greenheck�Test�Switch � •�Grille�Installation � •�Metal�Stud�in�Shaftwall � •�No�Flow�Smoke�Detector � •�Open�or�Close�Indicator � •�Quick�Connect�Breakaway�Connections � •�Resettable�Link � •�Sealant�Supplement � •�Single�Side�Retaining�Angle � •�Single�3-Sided�Retaining�Angle � •�Sleeve�Extension � •�Smoke�Detector � •�Tunnel�Corridor

Instructions included in this booklet: IOM # Description Page(s) 461335 CFSD-XXX Series 2–6 461336 FSD-XXX, DFD-XXX & CFSD-XXX Series 7–15 461337 OFSD-XXX, ODFD-XXX, OFD-XXX and OSSFD-XXX Series 16–27 461666 FSD-3XXV Series 28–35 461868 FSDR-XXX, SEFSDR-XXX, & SSFSDR-XXX Models 36–42 472477 GFSD Models 43-48 474015 Single Side Retaining Angle 49-51 KIT # 826249 MULTI-BLADE FIRE DAMPERS DFD / FSD / CFSD / OFSD INSTALLATION INSTRUCTION BOOKLET FOR MULTI-BLADE FIRE & COMBINATION FIRE SMOKE DAMPERS 1

InstallatIon supplements Refer to the appropriate Greenheck installation supplements for special requirements: • Shaftwall Supplement • Drywall Supplement • Wood Supplement • Smoke Detector Supplement • Tunnel Corridor Supplement • Single Side Retaining Angle Supplement • Grille Installation Supplement • Field Installed Sleeve Supplement Installation,Operation and Maintenance Instructions for FsD-xxx, DFD-xxx,DFDtF-xxx CFsD-xxx,seDFD-xxx, seFsD-xxx, Imo-xxx, anD ssFsD-xxx serIes 1 1⁄2 and 3 Hour Fire & Combination Fire smoke Dampers (with factory installed sleeve and actuator) Vertical and Horizontal mount part #461336 saFety WarnInG: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. read the installation, operating, and maintenance instructions thoroughly before installing or servicing this equipment. This manual is the property of the owner, and is required for future maintenance. Please leave it with the owner when the job is complete. Typical Actuator RRL Control Device Standard Warranty Greenheck warrants this equipment to be free from defects in material and workmanship for a period of one year from the purchase date. Any units or parts which prove to be defective during the warranty period will be repaired or replaced at our option. Greenheck shall not be liable for damages resulting from misapplication or misuse of its products. Greenheck will not be responsible for any installation or removal costs. Greenheck will not be responsible for any service work or backcharges without prior written authorization. Due to continuing research, Greenheck reserves the right to change specifications without notice. “ul ClassIFIeD (see complete marking on product)” “ul ClassIFIeD to Canadian safety standards (see complete marking on product)” UL Standard 555 & 555S (Classification #R13317) FSD-XXX, SEFSD-XXX, SSFSD-XXX, DFD-XXX, SEDFD-XXX, and CFSD-XXX Series Dampers are intended for installation in accordance with combination fire smoke damper requirements established by: national Fire protection association NFPA Standards 90A, 92A, 92B & 101 BoCa national Building Codes ICBo uniform Building Codes IBC International Building Codes sBCCI standard Building Codes new york City (MEA listing #260-91-M) California state Fire marshal (Listing #3225-0981:103) and (Listing #3230-0981:104) - FSD models; (Listing #3225- 0981:103) - DFD models; (Listing #3230-0981:105) and (Listing 3225-0981:106) - CFSD models; (Listing #3225-0981:109) and (Listing 3230-0981:110 ) - SSFSD models reCeIVInG anD HanDlInG Upon receiving dampers, check for both obvious and hidden damage. If damage is found, record all necessary information on the bill of lading and file a claim with the final carrier. Check to be sure that all parts of the shipment, including accessories, are accounted for. Dampers must be kept dry and clean. Indoor storage and protection from dirt, dust and the weather is highly recommended. Do not store at temperatures in excess of 100°F.