Greenheck MiniCore Series Manuals

1 Energy Core Ventilator Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with these instructions will result in voiding of the product warranty and may result in personal injury and/or property damage. ® ® Document 479677 Model MiniCore Energy Core Ventilator Energy Recovery Technical Support Call 1-800-240-0870 Only qualified personnel should install this system. Personnel should have a clear understanding of these instructions and should be aware of general safety precautions. Improper installation can result in electric shock, possible injury due to coming in contact with moving parts, as well as other potential hazards. Other considerations may be required if high winds or seismic activity are present. If more information is needed, contact a licensed professional engineer before moving forward. 1. Follow all local electrical and safety codes, as well as the National Electrical Code (NEC), the National Fire Protection Agency (NFPA), where applicable. Follow the Canadian Electrical Code (CEC) in Canada. 2. All moving parts must be free to rotate without striking or rubbing any stationary objects. 3. Unit must be securely and adequately grounded. 4. Do not spin fan wheel faster than maximum cataloged fan RPM. Adjustments to fan speed significantly affects motor load. If the fan RPM is changed, the motor current should be checked to make sure it is not exceeding the motor nameplate amps. 5. Do not allow the power cable to kink or come in contact with oil, grease, hot surfaces or chemicals. Replace cord immediately if damaged. 6. Verify that the power source is compatible with the equipment. 7. Never open access doors to the unit while it is running. General Safety Information DANGER Always disconnect power before working on or near this equipment. Lock and tag the disconnect switch or breaker to prevent accidental power up. CAUTION When servicing the unit, the internal components may be hot enough to cause pain or injury. Allow time for cooling before servicing. CAUTION Precaution should be taken in explosive atmospheres. Energy recovery cores are certified by the AHRI Air-to-Air Energy Recovery Ventilation Equipment Certification Program in accordance with AHRI Standard 1060. Actual performance in packaged equipment may vary. Certified Ratings are available in the Certified Product Directory at www.ahridirectory.org