Greenheck ODFD-XXX Manuals

Part Number 461337 OFSD-XXX, ODFD-XXX, OFD-XXX, and OSSFD-XXX Series 11/2 Hour Combination Fire Smoke or Curtain Fire Dampers Out of Wall or Out of Floor Vertical or Horizontal Mount Installation, Operation, and Maintenance Instructions OFSD-XXX, ODFD-XXX, OFD-XXX, and OSSFD- XXX series dampers are intended for installation in accordance with combination fire smoke dampers requirements established by: NFPA National Fire Protection Association NFPA Standards 80, 90A, 92A, 92B, 101, & 105 IBC International Building Codes BOCA National Building Codes ICBO Uniform Building Codes SBCCI Standard Building Codes New York City (MEA listing # 260-91-M) California State Fire Marshal Listing #3225-0981:103 & 3230-0981:104 “UL Classified (see complete marking on product)” “UL Classified to Canadian safety standards (see complete marking on product)” UL Standard 555 & 555S (Classification R13317) Receiving and Handling Upon receiving dampers, check for both obvious and hidden damage. If damage is found, record all necessary information on the bill of lading and file a claim with the final carrier. Check to be sure that all parts of the shipment, including accessories, are accounted for. Dampers must be kept dry and clean. Indoor storage and protection from dirt, dust and the weather is highly recommended. Do not store at temperatures in excess of 100°F (38°C). Warranty Greenheck warrants this equipment to be free from defects in material and workmanship for a period of one year from the purchase date. Any units or parts which prove to be defective during the warranty period will be repaired or replaced at our option. Greenheck shall not be liable for damages resulting from misapplication or misuse of its products. Greenheck will not be responsible for any installation or removal costs. Greenheck will not be responsible for any service work or backcharges without prior written authorization. Safety Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating, and maintenance instructions thoroughly before installing or servicing this equipment. Electrical Guidelines All wiring shall be done in accordance with the National Electrical Code ANSI/NFPA-70 latest edition, any local codes that may apply, and wiring diagrams developed in compliance with the job or project design and specifications. Due to continuing research, Greenheck reserves the right to change specifications without notice. This manual is the property of the owner, and is required for future maintenance. Please leave it with the owner when the job is complete. Safety Caution! Electrical input may be needed for this equipment. This work should be performed by a qualified electrician. Verify power before wiring actuator. Greenheck is not responsible for any damage to, or failure of the unit caused by incorrect field wiring. To avoid causing death or serious bodily harm to building occupants, follow all instructions carefully. Dampers must close completely to preserve the integrity of the fire smoke separation.