GreenWorks 25223 Manuals

19” 40 V Lithium-Ion Cordless Mower 19 po. Tondeuse à batterie au lithium-ion de 40 V Podadora inalámbrica de 19 pulg. de ión de litio de 40 V Q GUÍA PARA COMIENZO RÁPIDO GUIDE DE DÉMARRAGE RAPIDE UICK START GUIDE Model # / Modèle # / Modelo #: 25223 WARNING: AVERTISSEMENT: Rev:01 Printed in China / Imprimé en Chine / Impreso en China This Quick Start Guide is not a substitute for reading the operator's manual. To reduce the risk of injury or death, user must read and understand operator's manual before using this product. Ce Guide de Démarrage Rapide ne vous dispense pas de lire le manuel utilisateur. Pour réduire les risques de blessures éventuellement mortelles, l'utilisateur doit lire et comprendre le manuel utilisateur avant d'utiliser ce produit. ADVERTENCIA: No se debe considerar esta guía para comienzo rápido como substituto de una lectura completa del manual del operador. Para reducir el riesgo de lesiones o de muerte, el usuario debe leer y comprender el manual del operador antes de usar el producto. • Pull up and back on the upper handle to raise the handle into operating position. Make certain the handles snap into place securely. • Tighten the upper handle with the cam locks on both sides. • Tighten the lower handle with the handle knobs on both sides. • Lift the chute cover (1). • Lift the grass catcher by its handle (2) and place under the chute cover so that the hooks (3) on the grass catcher frame are seated into the slots in the handle bracket. • Release the chute cover. When installed correctly, the hooks on the grass catcher will rest securely in the slots on the handle brackets. • To remove the mulching plug, lift the chute cover (1). • Grasp the handle (2) of the mulching plug and pull the mulching plug out using the handle. • The mulching plug (3) is inserted on an angle, so it requires some force to remove it. • The mulching plug must be removed in order to install the grass catcher bag. The mulching plug must be re-installed when the grass catcher bag is removed. • Lift and hold up the battery door. • Place the battery pack on the mower. Align guided ribs on battery pack with grooves in the product’s battery port. • Make sure the latch on bottom of the battery pack snaps in place and that battery pack is fully seated and secure in the mower before beginning operation. • Insert the key. • If the machine is not going to be used immediately, do not insert the key. • Close the door. To start the motor: • Open the battery door and insert the key into the slot. • Press and hold the safety lock-out button (1). • Pull the bail switch (2) upward to the handle to start the mower and release the button. To stop the motor: • Release the bail switch. • Lift the side discharge cover (1). • Align the grooves on the discharge chute (2) with the pins on the underside of the discharge cover (1). • Lower the discharge chute (2) until the hooks on the mower deck are secured in the openings in the discharge chute (2). • Release the side discharge cover (1). • To raise the blade height, grasp the height adjustment lever (1) and move it toward the back of the mower. • To lower the blade height, grasp the height adjustment lever (1) and move it toward the front of the mower. UNFOLDING AND ADJUSTING HANDLE INSTALLING THE GRASS CATCHER BAG CUTTING HEIGHT ADJUSTMENT INSTALLING THE MULCHING PLUG INSTALLING BATTERY PACK STARTING/STOPPING THE MOWER INSTALLING SIDE DISCHARGE CHUTE EN Bail switch Safety lock-out button 1 Handle knob Cam locks Handle knob 3 Slots 1 2 2 1 Key Battery Battery door 1 2 3