Grizzly G4002 Manuals

MODEL G4002/G4003 GEAR-HEAD LATHE OWNER'S Manual (For models manufactured since 8/12) Copyright © JANUARY, 2000 By Grizzly Industrial, Inc., Revised JUNE, 2013 (BL) Warning: No portion of this manual may be reproduced in any shape Or form without the written approval of Grizzly Industrial, inc. #0350 printed IN CHINA (Model G4003 Shown)

GEAR HEAD METAL LATHE MODEL G4002 / G4003 PARTS LIST COPYRIGHT © 2000 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. REVISED JANUARY, 2000 PRINTED IN CHINA PARTS LIST DISCLAIMER THIS PARTS LIST AND DRAWINGS REPRESENT THE CONFIGURATION OF THE MACHINE AS IT IS CURRENTLY BEING SHIPPED. THE MACHINE CON- FIGURATION CAN CHANGE AS PRODUCT IMPROVEMENTS ARE INCORPORATED. IF YOU OWN AN EARLIER VERSION OF THE MACHINE, THIS PARTS LIST MAY NOT DEPICT YOUR MACHINE EXACTLY. CONTACT CUSTOMER SERVICE IF YOU HAVE ANY QUESTIONS ABOUT PART DIFFERENCES. PREVIOUS PARTS LIST VERSIONS ARE NOT AVAILABLE ONLINE.

COPYRIGHT © SEPTEMBER, 2015 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. #MN17636 PRINTED IN CHINA The following changes were recently made to this machine since the owner's manual was printed: • Spindle ON/OFF switch has been changed from a rotary switch to a micro switch. • Spindle ON/OFF switch wiring has been revised. • Piece Inventory has been updated. Aside from this information, all other content in the owner's manual applies and MUST be read and under- stood for your own safety. IMPORTANT: Keep this update with the owner's manual for future reference. For questions or help, contact our Tech Support at (570) 546-9663 or [email protected]. READ THIS FIRST For questions or help with this product contact Tech Support at (570) 546-9663 or [email protected] Model G4002/G4003 ***IMPORTANT UPDATE*** For Machines Mfd. Since December, 2014 and Owner's Manual Printed April, 2014 New Spindle ON/OFF Switch 919V2 918V2 917 916 915 914 913 911 910 909 908 907V2 912 946 947 948 949 950 A REF PART # DESCRIPTION 907V2 P4002907V2 SPINDLE ROD V2.12.14 918V2 P4002918V2 CONNECTION BRACKET V2.12.14 919V2 P4002919V2 SPINDLE ON/OFF SWITCH V2.12.14 946 P4002946 CAP SCREW M4-.7 X 6 947 P4002947 SET SCREW M6-1 X 8 948 P4002948 SPINDLE SWITCH ARM 949 P4002949 SPINDLE SWITCH BOX 950 P4002950 BUTTON HD CAP SCR M4-.7 X 45 To Electrical Cabinet Page 84 Revised Spindle ON/OFF Switch Wiring Spindle Rotation Switch C C NO NO NC NC 4 5 7 6

Copyright © MARCH, 2008 By Grizzly Industrial, Inc. Warning: No portion of this manual may be reproduced in any shape or form without the written approval of Grizzly Industrial, inc. #CR10598 printed in china The Model G4002/G4003 lathe is shipped without oil. You must fill the headstock and apron with oil, and complete the Lubrication procedures outlined in the MAINTENANCE section on Page 27. If you run this lathe without oil, even for a short period of time, drivetrain parts will be damaged and your lathe warranty will be void. We recommend using ISO 68 or a good grade non-detergent SAE 30W motor oil in your lathe. Make sure to change the oil immediately after lathe break-in. If you have any questions about this manual insert or machine lubrication and break-in, please contact Grizzly Technical Support at (570) 546-9663 or email [email protected]. MODEL G4002/G4003 GEAR HEAD METAL LATHE Manual Insert GEARBOXES MUST BE FILLED WITH OIL! NO OIL SHIPPED WITH MACHINE! Requires ISO 68 or Non-Detergent SAE 30W Motor Oil.