hager 3470 Manuals

LATCH LOCKING CAM LATCH LOCKING CAM CAM KEYWAY SHOULD FACE LOCK EDGE OF DOOR LATCH LOCKING CAM CAM KEYWAY SHOULD FACE LOCK EDGE OF DOOR 3670 LEVERSET USING A SCREWDRIVER, ROTATE THE CAM 1. CLOCKWISE UNTIL THE CAM PROFILE LOOKS LIKE THE PICTURE ON THE LEFT. INSERT THE KEY INTO THE CYLINDER AND 2. ROTATE THE TAILPIECE 90 DEGREES CLOCKWISE. HOLD THE KEY IN THE POSITION FROM STEP 3. 2 AND INSTALL THE LEVER UNTIL IT SNAPS INTO PLACE. USING A SCREWDRIVER, ROTATE THE CAM UNTIL 1. THE KEYWAY FACES THE LOCK EDGE OF THE DOOR. INSERT KEY INTO THE CYLINDER AND ROTATE 2. THE KEY 90 DEGREES SO THE TAILPIECE MATCHES THE CAM PROFILE. HOLD THE KEY IN THE POSITION FROM STEP 2 3. AND INSTALL THE LEVER UNTIL IT SNAPS INTO PLACE. REPEAT STEPS 1-3 FOR THE OPPOSITE SIDE OF 4. THE LOCK. 3470/3570/3473/3573/3579 LEVERSET 3495 LEVERSET USING A SCREWDRIVER, ROTATE THE CAM UNTIL 1. THE KEYWAY FACES THE LOCK EDGE OF THE DOOR. INSERT KEY INTO THE CYLINDER AND ROTATE 2. THE KEY 90 DEGREES SO THE TAILPIECE MATCHES THE CAM PROFILE. HOLD THE KEY IN THE POSITION FROM STEP 2 3. AND INSTALL THE LEVER UNTIL IT SNAPS INTO PLACE. 3470/3473/3495/3570/3573/3579/3670 LEVERSET TIMING INSTRUCTIONS REV: 08 DRAWING NO: I-LS00310 SHEET 1 OF 2 HAGER COMPANIES 139 Victor Street, St. Louis, MO 63104 - (800) 325-9995 - Fax (800) 782-0149