HAMPTON BAY 62805 Manuals

HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance. PACKAGE CONTENTS PLANNING FOR A SUCCESSFUL ASSEMBLY Read all instructions before assembly and installation. Inspect each part for defects that may have occurred during shipping. Keep your receipt and these instructions for proof of purchase. CHOOSING THE RIGHT LOCATION Install your solar light in a location with full, direct sunlight. Do not install in shaded areas as these areas will not allow the batteries to fully charge and will reduce the nighttime operating hours for your light. Ensure that the installation location is away from other nighttime light sources such as street or porch lamps. These light sources may prevent your solar light from automatically turning on. HOW SOLAR WORKS The solar light has a solar panel that converts sunlight into electricity. During the day, the converted electricity is stored in the rechargeable batteries. At night, the solar light is powered by the batteries using the electricity stored during the day. The operating time depends on geographical location, daily weather conditions, and season. For optimal performance during the evening, allow the batteries to charge for 6 to 7 hours in direct sunlight. Assembly and Installation Preparing for installation 1 Item #1005 698 176 Model #62805 □ Insert the two stakes into each other’s slot. □ Cut the connector between the stakes (C). □ Firmly insert the posts of the assembled stake into the holes on the bottom of the light body. A C A D DECK NOTE: Do not use a hammer. If the ground is hard, use water to soften it or a trowel to loosen the soil. Installation options 2a 2 □ Push the assembly firmly into the ground. Ground Installation 2b □ Attach the light body on the deck (without the stakes) with screws provided (D). Deck or rail mount A C A D DECK Use and Care Guide Solar LED Deck Light A - Top cover x 4 B - AAA 1.2V 900mAh Ni-Mh rechargeable battery (pre-installed) x 4 C - Stake x 4 □ Push the power button on the bottom of the light body (A) to turn the light on. Check that the light is on by covering the solar panel with your hand to simulate darkness. NOTE: The solar panel will turn the light on automatically at dusk. D - Screw x 8 B A C D E E - Anchor x 8 NOTE: Screw anchors (E) are included for extra support. The included screws are designed to screw easily into wood. If you would like a more permanent or secure hold, install the anchors prior to attaching the light to the surface.