Hanna Instruments HI 8757 Manuals

1 Instruction Manual HI 8757 - HI 8758 Portable Microprocessor K-Type Thermocouple Thermometers h t t p : / / w w w . h a n n a i n s t . c o m These Instruments are in Compliance with the CE Directives ins e rum ns °C RANGE 0.1 °C : -50.0 to 150.0 °C 1 °C : -50 to 900 °C HI 8757 Microprocessor Thermometer OFF 1°C 0.1°C Untitled-28 2 2 Dear Customer, Thank you for choosing a Hanna Product. It is recommended that you read this instruction manual carefully before using the instrument. This manual will provide you with the necessary information for a correct use of the instrument, as well as a more precise idea of its versatility. If you need more technical information, do not hesitate to e-mail us at [email protected]. These instruments are in compliance with the directives EN 50081-1 and EN 50082-1. PRELIMINARY EXAMINATION ...................................................... 2 FUNCTIONAL DESCRIPTION AND SPECIFICATIONS OF HI 8757.... 3 FUNCTIONAL DESCRIPTION AND SPECIFICATIONS OF HI 8758.... 4 CALIBRATION............................................................................. 5 OPERATIONAL GUIDE ................................................................. 5 DISPLAY CODE GUIDE ................................................................ 5 ACCESSORIES............................................................................. 6 BATTERY REPLACEMENT .............................................................. 6 WARRANTY .............................................................................. 10 CE DECLARATION OF CONFORMITY............................................ 11 TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS ISO 9000 Certified Company since 1992 PRELIMINARY EXAMINATION PRELIMINARY EXAMINATION PRELIMINARY EXAMINATION PRELIMINARY EXAMINATION PRELIMINARY EXAMINATION Remove the instrument from the packing material and exam- ine it carefully to make sure that no damage has occurred during shipping. If there is any noticeable damage, notify your Dealer or the nearest Hanna Office. Note: Save all packing materials until you are sure that the instrument functions correctly. Any defective item must be returned in the original packaging together with the supplied accessories. 3 3 SPECIFICATIONS HI8757 Range -50.0 to 900°C Resolution 0.1°C (-50.0 to 150.0°C) 1°C (-50 to 900°C) Accuracy ±0.5% F.S. for one year, excluding probe error EMC Typical ±0.5ºC Deviation with HI 766 K-thermocouple probe Display 3½ digit LCD Battery Type 9V battery Life approximately 200 hours of continuous use Probe K-type thermocouple (optional see pages 6-10) Environment 0 to 50ºC (32 to 122ºF); max. 95% RH non-condensing Dimensions 180 x 83 x 40 mm (7.1x3.3x1.6") Weight 350 g (12.4 oz.) with probe FUNCTIONAL DESCRIPTION AND FUNCTIONAL DESCRIPTION AND FUNCTIONAL DESCRIPTION AND FUNCTIONAL DESCRIPTION AND FUNCTIONAL DESCRIPTION AND SPECIFICATIONS OF HI 8757 SPECIFICATIONS OF HI 8757 SPECIFICATIONS OF HI 8757 SPECIFICATIONS OF HI 8757 SPECIFICATIONS OF HI 8757 ins e rum ns °C RANGE 0.1 °C : -50.0 to 150.0 °C 1 °C : -50 to 900 °C HI 8757 Microprocessor Thermometer OFF 1°C 0.1°C 1 2 5 3 4 1) LCD display 2) Rotary switch 3) OFF mode 4) 1ºC resolution 5) 0.1ºC resolution Untitled-28 4 4 FUNCTIONAL DESCRIPTION AND FUNCTIONAL DESCRIPTION AND FUNCTIONAL DESCRIPTION AND FUNCTIONAL DESCRIPTION AND FUNCTIONAL DESCRIPTION AND SPECIFICATIONS OF HI 8758 SPECIFICATIONS OF HI 8758 SPECIFICATIONS OF HI 8758 SPECIFICATIONS OF HI 8758 SPECIFICATIONS OF HI 8758 ins e rum ns °F RANGE 0.2 °F : -58.0 to 199.9 °F 200 to 302 °F 1 °F : -58 to 1650 °F HI 8758 Microprocessor Thermometer OFF 1°F 0.2°F 5 3 4 1 2 1) LCD display 2) Rotary switch 3) OFF mode 4) 1ºF resolution 5) 0.2ºF resolution SPECIFICATIONS HI 8758 Range -58.0 to 1650°F Resolution 0.2°F (-58.0 to 199.8°F) 1°F (-58 to 1650°F) Accuracy ±0.5% F.S. for one year, excluding probe error EMC Typical ±1ºF Deviation with HI 766 K-thermocouple probe Display 3½ digit LCD Battery Type 9V battery Life approximately 200 hours of continuous use Probe K-type thermocouple (optional see pages 6-10) Environment 0 to 50ºC (32 to 122ºF); max 95% RH non-condensing Dimensions 180 x 83 x 40 mm (7.1x3.3x1.6") Weight 350 g (12.4 oz.) with probe 5 5 OPERATIONAL GUIDE OPERATIONAL GUIDE OPERATIONAL GUIDE OPERATIONAL GUIDE OPERATIONAL GUIDE INITIAL PREPARATION Remove the battery cover on the rear of your thermometer. Unwrap the battery. Insert and connect it to the clip and replace the cover. Connect the temperature probe to the probe socket on the top of the meter. To switch on, turn the rotary dial to the desired resolution in ºC or ºF (depending on the model). If a temperature probe is plugged in, the unit will display the temperature. With the rotary knob turned to the deci- mal-point resolution (0.1ºC or 0.2ºF), "Er" is displayed if the temperature reading falls out of the instrument range (see Specifica- tions on page 3-4). Turn the rotary knob to the 1ºC or 1ºF position. If "Er" is still displayed, check the probe cable and connector. To switch your thermometer off, turn the rotary knob to OFF. OFF 1°C 0.1°C OFF 1°C 0.1°C CALIBRATION CALIBRATION CALIBRATION CALIBRATION CALIBRATION All Hanna thermometers have been accurately pre-calibrated at the factory. It is generally recommended to have all thermometers recalibrated at least once a year. For an accurate annual recalibration, contact your dealer or the nearest Hanna Service Center. Display Description Er Temperature out of range Eb Low battery voltage All segments Initial input is out of range, light up for more or no probe is connected than 3 seconds to the instrument DISPLAY CODE GUIDE DISPLAY CODE GUIDE DISPLAY CODE GUIDE DISPLAY CODE GUIDE DISPLAY CODE GUIDE Untitled-28 6 6 BATTERY REPLACEMENT BATTERY REPLACEMENT BATTERY REPLACEMENT BATTERY REPLACEMENT BATTERY REPLACEMENT The meter stops to operate when the low battery signal is detected. The user is warned by the code "Eb" on the display. The instrument is powered by a 9 V battery lo- cated at the rear of the instrument. Battery replacement must only take place in a non-hazardous area using a 9V alkaline battery. To access the battery, remove the cover by ap- plying pressure in the direction indicated. Unplug the rundown battery and replace it with a new one. BATTERY ACCESSORIES ACCESSORIES ACCESSORIES ACCESSORIES ACCESSORIES K-TYPE THERMOCOUPLE PROBES with detachable handle & mini-connector (to be used in conjunction with the HI 766HD probe handle)::::: HI 766PA Roller surface probe, max 320°C/600°F HI 766PB Surface probe, max 650°C/1200°F 100mm 4" 280mm 7.8" 280mm 11" 200mm 7.9"

w w w . h a n n a i n s t . c o m WARRANTY Dear Customer, Thank you for choosing a Hanna product. This manual will provide you with the necessary information for correct opera- tion. Please read it carefully before using the meter. If you need additional technical information, do not hesitate to e- mail us at [email protected]. These instruments are in compliance with the CE directives. PRELIMINARY EXAMINATION GENERAL DESCRIPTION FUNCTIONAL DESCRIPTION SPECIFICATIONS Instruction Manual HI 8757 - HI 8758 Portable Microprocessor K-Type Thermocouple Thermometers All Hanna Instruments meters are warranted for two years against de- fects in workmanship and materials when used for their intended purpose and maintained according to instructions. Sensors and probes are warranted for a period of six months. This warranty is limited to repair or replacement free of charge. Damages due to accidents, misuse, tampering or lack of prescribed maintenance are not covered. If service is required, contact the dealer from whom you purchased the instru- ment. If under warranty, report the model number, date of purchase, serial number and the nature of the failure. First obtain a Returned Goods Authorization number from the Customer Ser- vice department, then return the instrument with the Authorization # included along with shipment costs prepaid. If the repair is not covered by the war- ranty, you will be notified of the charges. When shipping any instrument, make sure it is properly packaged for com- plete protection. Remove the instrument from the packing material and exam- ine it carefully to make sure that no damage has occurred during shipping. If there is any noticeable damage, notify your Dealer or the nearest Hanna Office. Note: Save all packing materials until you are sure that the instrument functions correctly. Any defective item must be returned in the original packaging together with 1) LCD display 2) Rotary switch 3) OFF mode 4) Measurement mode HI 8757 HI 8758 HI 8757 and HI 8758 are Hanna microprocessor-based, K- type thermocouple thermometers specially dedicated to education. These meters perform measurements either in °C (HI 8757) or °F (HI 8758) in a wide range of temperature; readings are linearized for increased accuracy, and resolution is automati- cally switched from 0.1° to 1° for temperatures above 200°C (400°F). These thermometers are also provided with battery level indication at start-up, and with the BEPS feature (Battery Error Prevention System), which automatically switches the instrument off when the battery is discharged to avoid erroneous readings due to low battery level. Each meter comes complete with a 9V battery and instruction manual. (*) Range may be limited by probe. (*) Range may be limited by probe. Hanna Instruments reserves the right to modify the design, construction and appearance of its products without advance notice. SPECIFICATIONS Range (*) Resolution (Autoranging) Accuracy (@20°C/68°F) Typical EMC Deviation Battery Type Life Probe Environment Dimensions Weight HI 8757 -50.0 to 199.9°C / 200 to 1350°C 0.1°C (-50.0 to 199.9°C) 1°C (200 to 1350°C) ±0.5% F.S. for 1 year, excluding probe error ±0.5ºC with HI766 K-thermocouple probe 1 x 9V (IEC 6LR61) battery approx. 500 hours of continuous use K-type thermocouple (see “Accessories”) -10 to 50ºC (14 to 122ºF); RH max 95% non-condensing 180 x 83 x 40 mm (7.1x3.3x1.6") 226 g (8 oz.) HI 8758 -58.0 to 399.9°F / 400 to 2462°F 0.1°F (-58.0 to 399.9°F) 1°F (400 to 2462°F) ±0.5% F.S. for 1 year, excluding probe error ±1ºF with HI766 K-thermocouple probe 1 x 9V (IEC 6LR61) battery approx. 500 hours of continuous use K-type thermocouple (see “Accessories”) -10 to 50ºC (14 to 122ºF); RH max 95% non-condensing 180 x 83 x 40 mm (7.1x3.3x1.6") 226 g (8 oz.) SPECIFICATIONS Range (*) Resolution (Autoranging) Accuracy (@20°C/68°F) Typical EMC Deviation Battery Type Life Probe Environment Dimensions Weight ACCESSORIES OPERATIONAL GUIDE Remove the battery cover on the back of the thermometer. Unwrap the supplied 9V battery, connect it to the battery clip and reattach the cover. Connect the temperature probe to the connector on the top of the meter. To switch ON, turn the rotary knob to the ºC or ºF position (depending on the model). The meter displays the percentage indication of the remaining battery life for a few seconds, and then enters measurement mode. If a temperature probe is plugged in, the meter displays the measured temperature either in °C (HI 8757) or °F (HI 8758), automatically switching to the resolution suitable to the temperature range; i.e. 0.1° up to 199.9°C (399.9°F), or 1° above. If no probe is plugged in, or if read- ing is over-range, the display shows flashing dashes. If a measurement is slightly over the range of the meter specifications, the display flashes the closest full-scale value. To switch the thermometer OFF, turn the rotary knob to OFF. FACTORY RECALIBRATION All Hanna thermometers have been accurately pre-calibrated at the factory. It is generally recommended to have all thermometers recalibrated at least once a year. For an accurate annual recalibration, contact your dealer or the nearest Hanna Service Center. BATTERY REPLACEMENT The instrument is powered by a 9 V battery and is provided with Battery Error Prevention System (BEPS), which turns the unit off when a low battery signal is detected. When the battery level is less than 10%, a warning symbol blinks on the display to indicate a low battery condition. It is recommended to replace the battery as soon as the low battery condition is detected. Remove the cover on the meter's back by applying pressure in the indicated direction. Unplug the rundown battery and replace it with a new one. Battery replacement must only take place in a nonhazardous area using a 9V alkaline battery. Recommendations for Users Before using these products, make sure that they are entirely suitable for the environment in wh they are used. Operation of these instruments in residential areas could cause unacceptable interference to radio a TV equipment, requiring the operator to take all necessary steps to correct interference. Any variation introduced by the user to the supplied equipment may degrade the instruments' EM performance. To avoid electrical shock, do not use these instruments when voltage at the measurement surfa exceeds 24 Vac or 60 Vdc. To avoid damage or burns, do not perform any measurement in microwave ovens. CE DECLARATION OF CONFORMITY K-TYPE THERMOCOUPLE PROBES with integral handle, 1 m (3.3’) cable & mini-connector, for several applications: HI 766A Roller surface, max 320°C/600°F HI 766B Surface, max 650°C/1200°F HI 766B1 90º surface, max 450°C/840°F HI 766B2 Spring-loaded, surface, max 900°C/1650°F HI 766B3 Spring-loaded, small surface probe with insulated shaft, max 200°C/390°F HI 766C Penetration, max 900°C/1650°F HI 766C1 Ultra-fast penetration, max 300°C/570°F HI 766D Air probe, max 300°C/570°F HI 766E1 General purpose probe, max 900°C/1650°F HI 766E2 General purpose probe, max 900°C/1650°F HI 766F High temperature, flexible wire probe without handle, max 1100°C/2000°F HI 766F1 Flexible wire probe without handle, max 480°C/ 900°F HI 766TR1 Penetration, max 250°C/482°F HI 766TR2 Penetration long probe, max 250°C/482°F HI 766TV1 Pipe clamp probe, max 200°C/390°F with detachable handle & mini-connector (to be used in conjunction with the HI 766HD probe handle): HI 766PA Roller surface, max 320°C/600°F HI 766PB Surface, max 650°C/1200°F HI 766PC Penetration, max 900°C/1650°F HI 766PD Air, max 300°C/570°F HI 766PE1 General purpose, max 900°C/1650°F HI 766PE2 General purpose, max 900°C/1650°F grill surface probe: HI 766B4 Grill surface probe with 70 cm (27.6’’) cable (protected with stainless steel jacket), max 250°C/482°F HI 7664B4S Spare stainless steel sensor for HI766B4 probe OTHER ACCESSORIES HI 710002 Soft carrying case HI 710009 Shockproof rubber boot, blue HI 710010 Shockproof rubber boot, orange HI 721316 RUGGED carrying case HI 766EX Extension cable for K-type probes HI 766HD Rugged thermocouple probe handle with 1m (3.3') cable fitted with mini-connector ACCESSORIES IST8757R1 06/0