Hanna Instruments HI 98127 Manuals

w w w . h a n n a i n s t . c o m Hanna Instruments reserves the right to modify the design, con- struction and appearance of its products without advance notice. WARRANTY WARRANTY WARRANTY WARRANTY WARRANTY HI 98127 and HI 98128 are warranted for one year against defects in workmanship and materials when used for their intended purpose and maintained ac- cording to instructions. The electrode is warranted for a period of six months. This warranty is limited to repair or replacement free of charge. Damages due to accident, misuse, tampering or lack of prescribed maintenance are not covered. If service is required, contact the dealer from whom you purchased the instrument. If under warranty, report the model number, date of purchase, serial number and the nature of the failure. If the repair is not covered by the warranty, you will be notified of the charges incurred. If the instrument is to be re- turned to Hanna Instruments, first obtain a Returned Goods Authorization Number from the Customer Service department and then send it with shipment costs prepaid. When shipping any instrument, make sure it is properly packaged for complete protection. To validate your warranty, fill out and return the enclosed warranty card within 14 days from the date of purchase. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner, Hanna Instruments Inc., Woonsocket, Rhode Island, 02895 , USA. Instruction Manual HI 98127 - HI 98128 Waterproof pH & temperature meters Dear Customer, Thank you for choosing a Hanna product. This manual will provide you with the necessary information for a correct operation. Please read it carefully before using the meter. If you need additional technical information, do not hesitate to e-mail us at [email protected]. These instruments are in compliance with the directives. Remove the instrument from the packing material and examine it carefully. If any damage has occurred during shipment, immediately notify your Dealer or the nearest Hanna Customer Service Center. The meters are supplied with: • 4 x 1.5V batteries • HI 73127 pH electrode • HI 73128 Tool to remove the pH electrode Note: Conserve all packing material until the instru- ment has been observed to function correctly. Any defective item must be returned in its original packing. PRELIMINARY EXAMINATION PRELIMINARY EXAMINATION PRELIMINARY EXAMINATION PRELIMINARY EXAMINATION PRELIMINARY EXAMINATION HI 98127 and HI 98128 are waterproof pH and temperature meters. The housing has been com- pletely sealed against humidity and designed to float. All pH readings are automatically temperature com- pensated (ATC), and temperature values can be displayed in °C or °F units. The meters can be calibrated at one or two points with auto-buffer recognition and against five memo- rized buffer values. Measurements are highly accurate with a unique stability indicator right on the LCD. A low battery symbol warns the user when the batter- ies are to be replaced. In addition the Battery Error Prevention System (BEPS) avoids erroneous reading caused by low voltage level by turning the meter off. The HI 73127 pH electrode, supplied with the meters, is interchangeable and can be easily replaced by the user. The stainless steel encapsulated temperature sensor facilitates faster and more accurate temperature mea- surement and compensation. GENERAL DESCRIPTION GENERAL DESCRIPTION GENERAL DESCRIPTION GENERAL DESCRIPTION GENERAL DESCRIPTION FUNCTIONAL DESCRIPTION FUNCTIONAL DESCRIPTION FUNCTIONAL DESCRIPTION FUNCTIONAL DESCRIPTION FUNCTIONAL DESCRIPTION 1. Battery compartment 2. Liquid Crystal Display (LCD) 3. Stability indicator 4. Low battery indicator 5. ON/OFF/MODE button 6. HI 73127 pH electrode 7. Temperature sensor 8. SET/HOLD button 9. Secondary LCD 10. Primary LCD These Instruments are in Compliance with CE Directives CE DECLARATION CE DECLARATION CE DECLARATION CE DECLARATION CE DECLARATION OF CONFORMITY OF CONFORMITY OF CONFORMITY OF CONFORMITY OF CONFORMITY Recommendations for Users Before using this product, make sure that it is entirely suitable for the environment in which it is used. Operation of this instrument in residential areas could cause unacceptable interferences to radio and TV equipment. The glass bulb at the end of the electrode is sensitive to electrostatic discharges. Avoid touching this glass bulb at all times. During operation, ESD wrist straps should be worn to avoid possible damage to the electrode by electrostatic discharges. Any variation introduced by the user to the supplied equipment may degrade the instrument’s EMC per- formance. To avoid electrical shock, do not use this instrument when voltages at the measurement surface exceed 24 VAC or 60 VDC. To avoid damages or burns, do not perform any measurement in microwave ovens. ACCESSORIES ACCESSORIES ACCESSORIES ACCESSORIES ACCESSORIES HI 73127 Replaceable pH electrode HI 73128 Tool to remove the pH electrode HI 70004P pH 4.01 solution, 20 mL sachet (25 pcs) HI 70006P pH 6.86 solution, 20 mL sachet (25 pcs) HI 70007P pH 7.01 solution, 20 mL sachet (25 pcs) HI 70009P pH 9.18 solution, 20 mL sachet (25 pcs) HI 70010P pH 10.01 solution, 20 mL sachet (25 pcs) HI 77400P pH 4 & 7 solutions, 20 mL sachet (5 each) HI 7004M pH 4.01 solution, 230 mL bottle HI 7006M pH 6.86 solution, 230 mL bottle HI 7007M pH 7.01 solution, 230 mL bottle HI 7009M pH 9.18 solution, 230 mL bottle HI 7010M pH 10.01 solution, 230 mL bottle HI 7061M Electrode cleaning solution, 230 mL bottle HI 70300M Electrode storage solution, 230 mL bottle www.tools.in.th www.neonics.co.th

w w w . h a n n a i n s t . c o m WARRANTY HI 98127 and HI 98128 are warranted for one year against defects in workmanship and materials when used for their intended purpose and maintained according to instructions. The electrode is war- ranted for a period of six months. This warranty is limited to repair or replacement free of charge. Damages due to accident, misuse, tampering or lack of prescribed maintenance are not covered. If service is required, contact the dealer from whom you purchased the instrument. If under warranty, report the model number, date of purchase, serial number and the nature of the failure. If the repair is not covered by the warranty, you will be notified of the charges incurred. If the instrument is to be re- turned to Hanna Instruments, first obtain a Returned Goods Authorization Number from the Customer Service department and then send it with shipment costs prepaid. When shipping any instrument, make sure it is properly packaged for complete protection. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Instruction Manual HI 98127 • HI 98128 Waterproof pH Testers with Replaceable Electrode Remove the instrument from the packing material and examine it carefully. If any damage has occurred during shipment, immediately notify your Dealer or the nearest Hanna Customer Service Center. Each meter is supplied with: • HI 73127 pH electrode • HI 73128 electrode removal tool • batteries (4 x 1.5V) and instructions Note: Conserve all packing material until the instru- ment has been observed to function correctly. Any defective item must be returned in its original packing. PRELIMINARY EXAMINATION HI 98127 and HI 98128 are waterproof pH and temperature meters. The housing has been completely sealed against humidity and designed to float. All pH readings are automatically temperature com- pensated (ATC), and temperature values can be displayed in °C or °F units. The meters can be calibrated at one or two points with auto-buffer recognition and against five memorized buffer values. Measurements are highly accurate with a unique sta- bility indicator right on the LCD. These meters are also provided with battery level indication at start-up, and with a low battery symbol which warns the user when the batteries need to be replaced. In addition the Battery Error Prevention System (BEPS) avoids erroneous reading caused by low voltage level by turning the meter off. The HI 73127 pH electrode, supplied with the meters, is interchangeable and can be easily replaced. The stainless steel encapsulated temperature sensor fa- cilitates faster and more accurate temperature measurement and compensation. GENERAL DESCRIPTION FUNCTIONAL DESCRIPTION 1. Battery compartment 2. Liquid Crystal Display (LCD) 3. ON/OFF/MODE button 4. HI 73127 pH electrode 5. Temperature sensor 6. SET/HOLD button CE DECLARATION OF CONFORMITY Recommendations for Users Before using this product, make sure that it is entirely suitable for the environment in which it is used. The glass bulb at the end of the electrode is sensitive to electrostatic discharges. Avoid touching the glass bulb at all times. Any variation introduced by the user to the supplied equipment may degrade the instrument’s EMC per- formance. To avoid electrical shock, do not use this instrument when voltages at the measurement surface exceed 24 Vac or 60 Vdc. To avoid damages or burns, do not perform any measurement in microwave ovens. ACCESSORIES HI 73127 Replaceable pH electrode HI 73128 Electrode removal tool HI 70004P pH 4.01 solution, 20 mL sachet (25 pcs) HI 70006P pH 6.86 solution, 20 mL sachet (25 pcs) HI 70007P pH 7.01 solution, 20 mL sachet (25 pcs) HI 70009P pH 9.18 solution, 20 mL sachet (25 pcs) HI 70010P pH 10.01 solution, 20 mL sachet (25 pcs) HI 77400P pH 4 & 7 solutions, 20 mL sachet (5 each) HI 7004M pH 4.01 solution, 230 mL bottle HI 7006M pH 6.86 solution, 230 mL bottle HI 7007M pH 7.01 solution, 230 mL bottle HI 7009M pH 9.18 solution, 230 mL bottle HI 7010M pH 10.01 solution, 230 mL bottle HI 7061M Electrode cleaning solution, 230 mL bottle HI 70300M Electrode storage solution, 230 mL bottle 1. ATC (Automatic Temperature Compen- sation) indicator 2. Stability indicator 3. Battery life percentage indicator 4. Low battery indicator 5. Secondary display 6. Primary display 7. Measuring unit for primary display IST98127R5 07/05 US DESIGN PATENT D462,024 Hanna Instruments reserves the right to modify the design, con- struction and appearance of its products without advance notice. Dear Customer, Thank you for choosing a Hanna product. This manual will provide you with the necessary information for correct operation. Please read it care- fully before using the meter. If you need additional technical information, do not hesitate to e-mail us at [email protected]. These instruments are in compliance with the directives.

w w w . h a n n a i n s t . c o m Hanna Instruments reserves the right to modify the design, con- struction and appearance of its products without advance notice. WARRANTY HI 98127 and HI 98128 are warranted for one year against defects in workmanship and materials when used for their intended purpose and maintained according to instructions. The electrode is war- ranted for a period of six months. This warranty is limited to repair or replacement free of charge. Damages due to accident, misuse, tampering or lack of prescribed maintenance are not covered. If service is required, contact the dealer from whom you purchased the instrument. If under warranty, report the model number, date of purchase, serial number and the nature of the failure. If the repair is not covered by the warranty, you will be notified of the charges incurred. If the instrument is to be re- turned to Hanna Instruments, first obtain a Returned Goods Authorization Number from the Customer Service department and then send it with shipment costs prepaid. When shipping any instrument, make sure it is properly packaged for complete protection. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner, Hanna Instruments Inc., Woonsocket, Rhode Island, 02895 , USA. Instruction Manual HI 98127 - HI 98128 Waterproof pH & Temperature Meters Remove the instrument from the packing material and examine it carefully. If any damage has occurred during shipment, immediately notify your Dealer or the nearest Hanna Customer Service Center. Each meter is supplied with: • HI 73127 pH electrode • HI 73128 Electrode removal tool • 4 x 1.5V batteries Note: Conserve all packing material until the instru- ment has been observed to function correctly. Any defective item must be returned in its original packing. PRELIMINARY EXAMINATION HI 98127 and HI 98128 are waterproof pH and temperature meters. The housing has been completely sealed against humidity and designed to float. All pH readings are automatically temperature com- pensated (ATC), and temperature values can be displayed in °C or °F units. The meters can be calibrated at one or two points with auto-buffer recognition and against five memorized buffer values. Measurements are highly accurate with a unique sta- bility indicator right on the LCD. These meters are also provided with battery level indication at start-up, and with a low battery symbol which warns the user when the batteries need to be replaced. In addition the Battery Error Prevention System (BEPS) avoids erroneous reading caused by low voltage level by turning the meter off. The HI 73127 pH electrode, supplied with the meters, is interchangeable and can be easily replaced. The stainless steel encapsulated temperature sensor fa- cilitates faster and more accurate temperature measurement and compensation. GENERAL DESCRIPTION FUNCTIONAL DESCRIPTION 1. Battery compartment 2. Liquid Crystal Display (LCD) 3. ON/OFF/MODE button 4. HI 73127 pH electrode 5. Temperature sensor 6. SET/HOLD button These Instruments are in Compliance with CE Directives CE DECLARATION OF CONFORMITY Recommendations for Users Before using this product, make sure that it is entirely suitable for the environment in which it is used. The glass bulb at the end of the electrode is sensitive to electrostatic discharges. Avoid touching the glass bulb at all times. Any variation introduced by the user to the supplied equipment may degrade the instrument’s EMC per- formance. To avoid electrical shock, do not use this instrument when voltages at the measurement surface exceed 24 VAC or 60 VDC. To avoid damages or burns, do not perform any measurement in microwave ovens. ACCESSORIES HI 73127 Replaceable pH electrode HI 73128 Electrode removal tool HI 70004P pH 4.01 solution, 20 mL sachet (25 pcs) HI 70006P pH 6.86 solution, 20 mL sachet (25 pcs) HI 70007P pH 7.01 solution, 20 mL sachet (25 pcs) HI 70009P pH 9.18 solution, 20 mL sachet (25 pcs) HI 70010P pH 10.01 solution, 20 mL sachet (25 pcs) HI 77400P pH 4 & 7 solutions, 20 mL sachet (5 each) HI 7004M pH 4.01 solution, 230 mL bottle HI 7006M pH 6.86 solution, 230 mL bottle HI 7007M pH 7.01 solution, 230 mL bottle HI 7009M pH 9.18 solution, 230 mL bottle HI 7010M pH 10.01 solution, 230 mL bottle HI 7061M Electrode cleaning solution, 230 mL bottle HI 70300M Electrode storage solution, 230 mL bottle 1. Automatic temperature compensation indicator 2. Stability indicator 3. Battery life percentage indicator 4. Low battery indicator 5. Secondary display 6. Primary display 7. Measuring unit for primary display ISTR98127R4 03/03 US DESIGN PATENT D462,024 Dear Customer, Thank you for choosing a Hanna product. This manual will provide you with the necessary informa- tion for correct operation. Please read it carefully before using the meter. If you need additional technical information, do not hesitate to e-mail us at [email protected]. These instruments are in compliance with the directives.