Hanskamp MultiDos 035-000-000 Series Manuals

MultiDos 035-000-000 036-000-000 EN Installation and operating instructions Item number: 010-100-000 Date: Nov 2017 Version 1.8 - Translation of original instructions for use According to Annex 1 chapter 1.7.4 Machine guideline 2006/42/EG Doetinchem, The Netherlands www.hanskamp.nl/en Vloeistof Doseersysteem Liquid Dosing system Flüsigkeit Dosiersystem Liquide Systeme de dosage 2 - 30 Hanskamp AgroTech B.V. (the Netherlands) www.hanskamp.nl/en MultiDos EN Dosing system – Dosiersystem – Systeme de dosage - Doseersysteem Preface Manual Contents This manual contains the information necessary for the correct installation and opera- tion of a Hanskamp MultiDos. Study and understand this information thoroughly before configuration of the MultiDos. Failure to do so could result in damage to equipment. Please consult your milking equip- ment dealer if you do not understand the information in this manual, or if you need additional information. All information in this manual has been compiled with care. Hanskamp shall not be lia- ble for errors or faults in this manual. The recommendations are meant to serve as guidelines. All instructions, pictures and specifications in this manual are based on the latest information that was available at the time of publication. Your MultiDos may com- prise improvements, features or options that are not covered in this manual. Applicability The table below shows the type numbers of the MultiDos for which this manual is applicable. Model designation Contact number Local Service Provider We suggest you write the name, address, telephone number an E-mail address of your local service provider contact in the table below. This makes sure you can easily find the information. Name Address Telephone number E-mail address Model Type number MultiDos in Container (AC &DC) 035-001-000 035-002-000 036-001-000 036-002-000 Page 8 to 13) MultiDos wall mount (AC&DC) 035-003-000 036-003-000 (Page 14 to 17) 3 - 30 Hanskamp AgroTech B.V. (the Netherlands) www.hanskamp.nl/en MultiDos EN Dosing system – Dosiersystem – Systeme de dosage - Doseersysteem 1. Introduction MultiDos by Hanskamp, a proven, sustainable technique enabling you to very easily dose the right quantity of liquids per day and per cow. Smart, fast and affordable. MultiDos doses liquid propylene glycol like gravy on top of the feed chunks. And cows love it! The information in this manual is for farmers and technicians. • Dairy farmers use the information to test and adjust the MultiDos or to list overviews. • Technicians use the information to install and setup the MultiDos. 4 - 30 Hanskamp AgroTech B.V. (the Netherlands) www.hanskamp.nl/en MultiDos EN Dosing system – Dosiersystem – Systeme de dosage - Doseersysteem 2. Safety 2.1 Introduction The safety alert symbol identifies important safety messages on your MultiDos and in the manual. When you see this symbol, be alert to the possibility of personal injury or death. Follow the instruction of the safety message. Safety Alert Symbol 2.2 Signal Words Note the use of the signal words DANGER, WARNING and CAUTION with the safety messages. The signal word for each message uses the following guidelines: Warning! Indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. Danger! Indicates a imminently hazardous situation that, if not avoided, will result in death or serious injury. 2.3 Safety Instructions You are responsible for the SAFE operation and maintenance of your MultiDos. You must make sure that you and anyone else who is going to operate, maintain or work in the vicinity of the MultiDos knows all the related SAFETY information in this manual. YOU are the key to safety. Good safety practices protect you and the people around you. Make these practices a working part of your safety program. Make sure EVERYONE who operates, maintains or works near the MultiDos obeys the safety precautions. Do not risk injury or death by ignoring good safety practices. • MultiDos owners must train operators before they operate the MultiDos. This training must be repeated at least annually. • The operator must read, understand and obey all safety and operating instructions in the manual. • A person who has not read and understood all safety and operating instructions is not permitted to operate the MultiDos. • Do not modify the equipment in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the equipment, and persons. • Only use approved spare parts, and make sure they are only installed by authorized technicians.