Harman Kardon AVR 230 Manuals

22 pdf manual(s) Harman Kardon AVR 230 for free download (Document Types: Brochure & specs, Service manual, Owner's manual)

Harman Kardon AVR 230 Brochure & specs [PDF] (18 pages)

  • Identifier: id-417018
  • Brand: Harman Kardon
  • Device: AVR 230 Receiver
  • Type: PDF
  • Key Aspects: System Limitations and Considerations, Storage and Care Recommendations, Safety Recommendations and Warnings
  • UPD Date: 06.08.2026
  • Source File: 395974.pdf
  • Pages: 18
  • Description: Service and user manual for the Harman Kardon AVR 230.
Pages Preview:
  • Playlist: We make elusive technology easy to grasp, page 3 • We’re driven by a passion for music and cinema, page 4 • You’ll know where we’re going when you see where we’ve been, page 6 • The science of passion: current Harman Kardon technologies, page 8 • Harman Kardon’s digital path receiver technology, page 10 • Digital path receiver, page 12 • A/V receivers, page 14 • Stereo receivers, page 17 • Power amplifiers, page 18 • I
  • “Technology can get you most of the way to good sound…but that last critical leap to state-of-the-art reality comes only from endless hours of critical listening – and a deep, almost fanatical love of all types of music and every sort of movie. “Ever since I helped found Harman Kardon, we’ve been fanatical about maintaining a balance between pure engineering and what audio engineering’s true result should be – a more realistic entertainment e
  • 6 Harman Kardon celebrate its 50th anniversary. 2003 Leading automakers – BMW, Land Rover, Mercedes-Benz, Mini Cooper and Saab – include Harman Kardon high-performance systems, featuring Logic 7. 2002 Harman Kardon debuts the industry’s first stand- alone A/V receiver with a fully digital signal path from input to speaker outputs – the DPR 1001. 2002 No electrical engineering degree required, Part 2. We introduce the world’s first receivers with
  • Innovation is a combination of major technological breakthroughs and smaller, detail-level enhancements. To deliver the right combination of power, performance, flexibility and ease of use, Harman Kardon has always sought to strike a balance. We carefully weigh the development of key enhancements to the basic underpinnings of audio and video technology against the importance of making them accessible to both the advanced audiophile and the home theater nov
Document Preview & Text Transcription (Main Page)
Click to expand and read text
250 Crossways Park Drive, Woodbury, NY 11797 516.255.HKHK (4545) FAX 516.682.3523 www.harmankardon.com Part No. HKLIT8/03

Harman Kardon AVR 230 Brochure & specs [PDF] (18 pages)

  • Identifier: id-417020
  • Brand: Harman Kardon
  • Device: AVR 230 Receiver
  • Type: PDF
  • Key Aspects: Storage and Care Recommendations, Technical Data and Parameters, Safety Recommendations and Warnings
  • UPD Date: 23.04.2026
  • Source File: 395977.pdf
  • Pages: 18
  • Description: Complete service manual for the Harman Kardon AVR 230.
Pages Preview:
  • Playlist: We make elusive technology easy to grasp, page 3 • We’re driven by a passion for music and cinema, page 4 • You’ll know where we’re going when you see where we’ve been, page 6 • The science of passion: current Harman Kardon technologies, page 8 • Harman Kardon’s digital path receiver technology, page 10 • Digital path receivers, page 12 • A/V receivers, page 14 • Stereo receivers, page 17 • Power amplifiers, page 18 •
  • “Technology can get you most of the way to good sound…but that last critical leap to state-of-the-art reality comes only from endless hours of critical listening – and a deep, almost fanatical love of all types of music and every sort of movie.” “Ever since I helped found Harman Kardon, we’ve been fanatical about maintaining a balance between pure engineering and what audio engineering’s true result should be – a more realistic entertainmen
  • 6 Harman Kardon celebrate its 50th anniversary. 2003 Leading luxury automakers include Harman Kardon high-performance systems, featuring Logic 7. 2002 We debut the first stand- alone A/V receiver with a fully digital signal path from input to speaker outputs – the DPR 1001. 2002 Harman Kardon introduces the world’s first receivers with fully color-coded rear-panel connections for easy setup. 2002 Our patented EzSet remote lets you auto- matically calib
Document Preview & Text Transcription (Main Page)
Click to expand and read text
250 Crossways Park Drive, Woodbury, NY 11797 516.255.HKHK (4545) FAX 516.682.3523 www.harmankardon.com Part No. HKLIT12/03

Harman Kardon AVR 230 Service manual [PDF] (87 pages)

  • Identifier: id-2175871
  • Brand: Harman Kardon
  • Device: AVR 230 Stereo Receiver
  • Type: PDF
  • Key Aspects: Package Contents and Accessories List, Additional Modules and Accessories Guide, Pre-Installation Safety Requirements
  • UPD Date: 18.07.2026
  • Source File: 2111763.pdf
  • Pages: 87
  • Description: Full operation manual for the Harman Kardon AVR 230.
Pages Preview:
  • Each precaution in this manual should be followed during servicing. Components identified with the IEC symbol in the parts list are special significance to safety. When replacing a component identified with , use only the replacement parts designated, or parts with the same ratings or resistance, wattage, or voltage that are designated in the parts list in this manual. Leakage-current or resistance measurements must be made to determine that exposed parts
  • SAFETY PRECAUTIONS The following check should be performed for the continued protection of the customer and service technician. LEAKAGE CURRENT CHECK Measure leakage current to a known earth ground (water pipe, conduit, etc.) by connecting a leakage current tester between the earth ground and all exposed metal parts of the appliance (input/output terminals, screwheads, metal overlays, control shaft, etc.). Plug the AC line cord of the appliance directly in
  • ENGLISH Technical Specifications Audio Section Stereo Mode Continuous Average Power (FTC) 40 Watts per channel, 20Hz–20kHz, @ < 0.07% THD, both channels driven into 8 ohms Five-Channel Surround Modes Power Per Individual Channel Front L&R channels: 30 Watts per channel, @ < 0.07% THD, 20Hz–20kHz into 8 ohms Center channel: 30 Watts, @ < 0.07% THD, 20Hz–20kHz into 8 ohms Surround channels: 30 Watts per channel, @ < 0.07% THD, 20Hz–20kHz into 8 ohms
  • Troubleshooting Guide Processor Reset In the rare case where the unit’s operation or the displays seem abnormal, the cause may involve the erratic operation of the system’s memory or microprocessor. To correct this problem, first unplug the unit from the AC wall outlet and wait at least three minutes. After the pause, reconnect the AC power cord and check the unit’s operation. If the system still malfunctions, a system reset may clear the problem. To
Document Preview & Text Transcription (Main Page)
Click to expand and read text
harman/kardon Service Manual AVR137/230 5 x 30W 5.1 CHANNEL A/V RECEIVER CONTENTS ESD WARNING………………………..…..2 ELECTRICAL PARTS LIST…….……12 LEAKAGE TESTING……………….....…..3 SEMICONDUCTOR PINOUTS……...35 BASIC SPECIFICATIONS…………….….4 PCB DRAWINGS………….................72 TROUBLESHOOTING GUIDE….…….....5 BLOCK DIAGRAM………...................78 PROCESSOR RESET……………….……5 WIRING DIAGRAM…….....................79 PACKAGE LIST AND PARTS……….…...6 AMP BIAS ADJUSTMENT….…....…..80 DISASSEMBLY………………………….…7 SCHEMATIC DIAGRAMS……………81 UNIT EXPLODED VIEW AND PARTS...11 Released EU2008 harman/kardon, Inc. Rev 0, 04/2008 250 Crossways Park Dr. Woodbury, New York, 11797 Page 1 of 87

Harman Kardon AVR 230 Service manual [PDF] (87 pages)

  • Identifier: id-1271415
  • Brand: Harman Kardon
  • Device: AVR 230 Stereo Receiver
  • Type: PDF
  • Key Aspects: End-of-Life Handling and Disposal, Regulatory Compliance and Standards, Control Panel and Interface Navigation
  • UPD Date: 16.06.2026
  • Source File: 1267126.pdf
  • Pages: 87
  • Description: Complete user documentation for the Harman Kardon AVR 230.
Pages Preview:
  • Each precaution in this manual should be followed during servicing. Components identified with the IEC symbol in the parts list are special significance to safety. When replacing a component identified with , use only the replacement parts designated, or parts with the same ratings or resistance, wattage, or voltage that are designated in the parts list in this manual. Leakage-current or resistance measurements must be made to determine that exposed parts
  • SAFETY PRECAUTIONS The following check should be performed for the continued protection of the customer and service technician. LEAKAGE CURRENT CHECK Measure leakage current to a known earth ground (water pipe, conduit, etc.) by connecting a leakage current tester between the earth ground and all exposed metal parts of the appliance (input/output terminals, screwheads, metal overlays, control shaft, etc.). Plug the AC line cord of the appliance directly in
  • ENGLISH Technical Specifications Audio Section Stereo Mode Continuous Average Power (FTC) 40 Watts per channel, 20Hz–20kHz, @ < 0.07% THD, both channels driven into 8 ohms Five-Channel Surround Modes Power Per Individual Channel Front L&R channels: 30 Watts per channel, @ < 0.07% THD, 20Hz–20kHz into 8 ohms Center channel: 30 Watts, @ < 0.07% THD, 20Hz–20kHz into 8 ohms Surround channels: 30 Watts per channel, @ < 0.07% THD, 20Hz–20kHz into 8 ohms
  • Troubleshooting Guide Processor Reset In the rare case where the unit’s operation or the displays seem abnormal, the cause may involve the erratic operation of the system’s memory or microprocessor. To correct this problem, first unplug the unit from the AC wall outlet and wait at least three minutes. After the pause, reconnect the AC power cord and check the unit’s operation. If the system still malfunctions, a system reset may clear the problem. To
  • NO DESCRIPTION PARTS NO. Q,ty 1 2 3 4 5 1 ACCESSORY-1 BOX,OUT CARTON 5 6 1 3 DESCRIPTION NO CPS4A564 CQXAVR132/230 CPG1A820T 1 1 1 Q,ty PARTS NO. CPS4A565 SNOW,PAD(R) 4 1 1. Instruction manual ass'y - Accessories 2. Package Drawing 7 1 1 SNOW,PAD(L) SET AVR132/230SET 1 FM 1 POL ANT(UL) CSA1A018Z 1 1 NO DESCRIPTION PARTS NO. Q,ty 9 10 11 12 13 1 CPB1061Y POLY BAG CQX1A1154X MANUAL,INSTRUCTION MANUAL ,SETUP GUIDE 1 1 BOOKLET,INFORMATION CQE1A180Z 1 STAPLE CP
Document Preview & Text Transcription (Main Page)
Click to expand and read text
harman/kardon Service Manual AVR137/230 5 x 30W 5.1 CHANNEL A/V RECEIVER CONTENTS ESD WARNING………………………..…..2 ELECTRICAL PARTS LIST…….……12 LEAKAGE TESTING……………….....…..3 SEMICONDUCTOR PINOUTS……...35 BASIC SPECIFICATIONS…………….….4 PCB DRAWINGS………….................72 TROUBLESHOOTING GUIDE….…….....5 BLOCK DIAGRAM………...................78 PROCESSOR RESET……………….……5 WIRING DIAGRAM…….....................79 PACKAGE LIST AND PARTS……….…...6 AMP BIAS ADJUSTMENT….…....…..80 DISASSEMBLY………………………….…7 SCHEMATIC DIAGRAMS……………81 UNIT EXPLODED VIEW AND PARTS...11 Released EU2008 harman/kardon, Inc. Rev 0, 04/2008 250 Crossways Park Dr. Woodbury, New York, 11797 Page 1 of 87

Harman Kardon AVR 230 Service manual [PDF] (92 pages)

  • Identifier: id-1271272
  • Brand: Harman Kardon
  • Device: AVR 230 Stereo Receiver
  • Type: PDF
  • Key Aspects: Additional Modules and Accessories Guide, Hardware Setup Instructions, Cleaning and Sanitization Methods
  • UPD Date: 06.08.2026
  • Source File: 1267269.pdf
  • Pages: 92
  • Description: Reference manual for the Harman Kardon AVR 230.
Pages Preview:
  • Each precaution in this manual should be followed during servicing. Components identified with the IEC symbol in the parts list are special significance to safety. When replacing a component identified with , use only the replacement parts designated, or parts with the same ratings or resistance, wattage, or voltage that are designated in the parts list in this manual. Leakage-current or resistance measurements must be made to determine that exposed parts
  • Technical Specifications Audio Section Stereo Mode Continuous Average Power (FTC) 50 Watts per channel, 20Hz–20kHz, @ < 0.07% THD, both channels driven into 8 ohms 5 Channel Surround Modes Power Per Individual Channel, all channels driven simultaneously Front L&R channels: 40 Watts per channel, @ < 0.07% THD, 20Hz–20kHz into 8 ohms Center channel: 40 Watts, @ < 0.07% THD, 20Hz–20kHz into 8 ohms Surround channels: 40 Watts per channel, @ < 0.07% THD,
  • Troubleshooting Guide Processor Reset In the rare case where the unit’s operation or the displays seem abnormal, the cause may involve the erratic operation of the system’s memory or microprocessor. To correct this problem, first unplug the unit from the AC wall outlet and wait at least three minutes. After the pause, reconnect the AC power cord and check the unit’s operation. If the system still malfunctions, a system reset may clear the problem. T
  • Erase a macro as follows: 1. Simultaneously press and hold the Mute Button and the Macro Button containing the macro until the LED flashes. 2. Press the Surround Button to erase the macro. Resetting the Remote To reset the remote to its factory defaults, simultaneously press and hold any Input Selector and the “0” Numeric Key. When the Program LED flashes in amber, enter the code “333”. When the green LED goes out, the remote will have been fully r
Document Preview & Text Transcription (Main Page)
Click to expand and read text
harman/kardon Service Manual AVR 155/230 5 x 40W 5.1 CHANNEL A/V RECEIVER CONTENTS ESD WARNING 2 BASIC SPECIFICATIONS 3 TROUBLESHOOTING GUIDE 4 PROCESSOR RESET 4 REMOTE AND PROCESSOR RESET 5 PACKAGE LIST AND PARTS 6 DISASSEMBLY 7 EXPLODED VIEW AND PARTS 8 ELECTRICAL PARTS LIST 9 SEMICONDUCTOR PINOUTS 35 PCB DRAWINGS 76 BLOCK DIAGRAM 82 WIRING DIAGRAM 83 AMP BIAS ADJUSTMENT 84 SCHEMATIC DIAGRAMS 85 Released EU2008 harman/kardon, Inc. Rev 0, 07/2008 250 Crossways Park Dr. Woodbury, New York, 11797 harman/kardon AVR 155/230 Service Manual Page 1 of 92

Harman Kardon AVR 230 Service manual [PDF] (116 pages)

  • Identifier: id-1071739
  • Brand: Harman Kardon
  • Device: AVR 230 Receiver
  • Type: PDF
  • Key Aspects: Component Longevity Optimization, Step-by-Step Assembly Procedures, Information on Regular Maintenance
  • UPD Date: 09.08.2026
  • Source File: 1086661.pdf
  • Pages: 116
  • Description: Instruction booklet for the Harman Kardon AVR 230.
Pages Preview:
  • Each precaution in this manual should be followed during servicing. Components identified with the IEC symbol in the parts list are special significance to safety. When replacing a component identified with , use only the replacement parts designated, or parts with the same ratings or resistance, wattage, or voltage that are designated in the parts list in this manual. Leakage-current or resistance measurements must be made to determine that exposed parts
  • 7 L - Audio - R RDS Channel Digital Set Tuning Surr. Mode K L Surr. Select Optical 3 Coaxial 3 Video Video 3 K L Source K L M N 160 D Se S ur e ENGLISH FRONT-PANEL CONTROLS Power indicator Tuning Mode Standby/On Switch Channel Level Control Surround Modes USB Port Headphone EzSet/EQ Microphone Input Digital Audio Inputs (Optical 3 and Coaxial 3) Video 3 Analog Audio and Video Inputs Tuning Digital Input M N Navigation Remote IR Sensor Set Message Displ
  • 9 ENGLISH Component Video Monitor Output Component 1& 2 Inputs HDMI Monitor Output HDMI 1-3 Inputs 6-/8-Channel Analog Audio Inputs Coaxial 1 & 2 Digital Audio Inputs Video 2 Audio/ Video Inputs DVD Audio/ Video Inputs Video Monitor Output Video 1 Audio/ Video Inputs & Outputs AC Power Cord Subwoofer Output Front Speaker Outputs Surround Back Speaker Outputs Surround Speaker Outputs Optical 1&2 Digital Audio Inputs Tape Audio Inputs & Outputs Center Speake
  • 11 ENGLISH REMOTE CONTROL FUNCTIONS IR Transmitter Lens Device Power On Program Indicator AVR Selector AM/FM Test Tone Sleep Channel Controls On-Screen Display Channel Level Digital Input Tuning Mode Direct Station Entry Tuning Tone Mode Night Mode Track Skip Transport Controls Mute Device Power Off Source Selectors 6-/8-Channel Input Selector Volume TV/Video Speaker Setup KLM N Navigation OK Delay Alphanumeric Keys Memory Clear Preset Stations Selectors R
  • 12 REMOTE CONTROL FUNCTIONS HDMI 2 and 3: Each code set controls a source device (VCR/PVR, DVD player or cable/satellite set-top box) connected to one of these inputs. AUX: Controls a device connected to the Auxiliary Input. Any given button may have different functions, depending on which component is being controlled. Some buttons are labeled with these functions. For example, the Sleep Button is labeled for use as the Channel Up Button when controlling
Document Preview & Text Transcription (Main Page)
Click to expand and read text
harman/kardon Service Manual AVR 160/230 5 x 40W 5.1 CHANNEL A/V RECEIVER CONTENTS EXPLODED VIEW AND PARTS 12 ELECTRICAL PARTS LIST 13 SEMICONDUCTOR PINOUTS 41 PCB DRAWINGS 97 BLOCK DIAGRAM 104 WIRING DIAGRAM 105 AMP BIAS ADJUSTMENT 106 SCHEMATIC DIAGRAMS 107-116 ESD WARNING 2 FRONT AND REAR PANELS 3 REMOTE CONTROL 5 TROUBLESHOOTING GUIDE 8 PROCESSOR RESET 8 TECHNICAL SPECIFICATIONS 9 PACKAGE LISTS AND PARTS 10 DISASSEMBLY 11 Released EU2010 Harman Consumer Group, Inc. Rev 0, 05/2010 8500 Balboa Boulevard Northridge, California 91329 harman/kardon AVR 160/230 Service Manual 1 of 116

Harman Kardon AVR 230 Service manual [PDF] (135 pages)

  • Identifier: id-2175887
  • Brand: Harman Kardon
  • Device: AVR 230 Receiver
  • Type: PDF
  • Key Aspects: Documentation and Revision History, Technical Support and Resource Links, Component Overview and Descriptions
  • UPD Date: 01.07.2026
  • Source File: 2111747.pdf
  • Pages: 135
  • Description: Complete device guide for the Harman Kardon AVR 230.
Pages Preview:
  • Each precaution in this manual should be followed during servicing. Components identified with the IEC symbol in the parts list are special significance to safety. When replacing a component identified with , use only the replacement parts designated, or parts with the same ratings or resistance, wattage, or voltage that are designated in the parts list in this manual. Leakage-current or resistance measurements must be made to determine that exposed parts
  • 1. Inspect all lead dress to make certain that leads are not pinched or that hardware is not lodged between the chassis and other metal parts in the unit. 2. Be sure that any protective devices such as nonmetallic control knobs, insulating fish- papers, cabinet backs, adjustment and compartment covers or shields, isolation resistor-capacity networks, mechanical insulators, etc. Which were removed for the servicing are properly re-installed. Before returnin
  • 4 SPECIFICATIONS Technical Specifications Audio Section Stereo Mode Continuous Average Power (FTC) 50 Watts per channel, 20Hz–20kHz, @ < 0.07% THD, both channels driven into 8 ohms Five-Channel Surround Modes Power Per Individual Channel Front L&R channels: 40 Watts per channel @ < 0.07% THD, 20Hz–20kHz into 8 ohms Center channel: 40 Watts @ < 0.07% THD, 20Hz–20kHz into 8 ohms Surround channels: 40 Watts per channel @ < 0.07% THD, 20Hz–20kH
  • 5 FRONT PANEL CONTROLS 1 Main Power Switch: Press this button to apply power to the AVR 210. When the switch is pressed in, the unit is placed in a Standby mode, as indicated by the amber LED 3 sur- rounding the System Power Control 2. This button MUST be pressed in to operate the unit. To turn the unit off and prevent the use of the remote control, this switch should be pressed until it pops out from the front panel so that the word “OFF” may be read
  • 6 FRONT PANEL CONTROLS Front Panel Controls 7 Surround Mode Selector: Press this but- ton to change the surround mode by scrolling through the list of available modes. Note that depending on the type of input, some modes are not always available. (See page 25 for more information about surround modes.) 8 Tuning Selector: Press the left side of the button to tune lower-frequency stations and the right side of the button to tune higher-frequency stations. Wh
Document Preview & Text Transcription (Main Page)
Click to expand and read text
harman/kardon AVR210 A/V DOLBY DIGITAL RECEIVER SERVICE MANUAL CONTENTS ESD WARNING…………………..…..……….2 LEAKAGE TESTING………………....….…....3 BASIC SPECIFICATIONS…………….….…..4 FRONT PANEL CONTROLS……….….…….5 REAR PANEL CONNECTIONS…………..…9 REMOTE CONTROL FUNCTIONS………..11 TROUBLESHOOTING GUIDE…...……...…14 PROCESSOR RESET……………………....14 IDLE CURRENT/TUNER ALIGNMENT……15 BULLETIN # H/K2001-01…………….…..…16 BULLETIN # H/K2001-03…………….…..…18 BULLETIN # H/K2003-07………...…………19 TECH TIP# HKTT2002-01………………...21 TECH TIP# HKTT2003-01………..……….23 TECH TIP# HKTT2004-03………..……….24 UNIT EXPLODED VIEW…………………..28 EXPLODED VIEW PARTS LIST…….…….29 BLOCK DIAGRAMS…………..……………30 PCB DRAWINGS……………………..……32 ELECTRICAL PARTS LIST……………….44 SEMICONDUCTOR PINOUTS……..…….65 SCHEMATICS………………….…...….…115 WIRING DIAGRAM……………………….132 PACKAGE…………………………………135 harman/kardon, Inc. 250 Crossways Park Dr. Woodbury, New York 11797 Rev2 – 6/2005

Harman Kardon AVR 230 Owner's manual [PDF] (52 pages)

  • Identifier: id-418644
  • Brand: Harman Kardon
  • Device: AVR 230 Stereo Receiver
  • Type: PDF
  • Key Aspects: Advanced Configuration Methods, Error Code Explanations, Hardware Setup Instructions
  • UPD Date: 14.08.2026
  • Source File: 398131.pdf
  • Pages: 52
  • Description: Professional operation guide for the Harman Kardon AVR 230.
Pages Preview:
  • AVR 230 AUDIO/VIDEO RECEIVER 3 Introduction 4 Important Safety Information 4 Unpacking 5 Front-Panel Controls 7 Rear-Panel Connections 10 Main Remote Control Functions 13 Installation and Connections 15 System Configuration 15 Speaker Placement 15 System Setup 17 Input Setup 17 Surround Setup 18 Speaker Setup 20 Delay Settings 21 Output Level Adjustment 21 Using EzSet 22 Manual Output Level Adjustment 24 Operation 24 Basic Operation 24 Source Selection 24
  • INTRODUCTION Thank you for choosing Harman Kardon®! With the purchase of a Harman Kardon AVR 230 you are about to begin many years of listening enjoyment. Designed to provide all the excitement and detail of movie soundtracks and every nuance of musical selec- tions, the AVR 230 is truly a multichannel receiver for the new millennium. The AVR 230 has been engineered so that it is easy to take advantage of all the power of its digital tech- nology. However
  • SAFETY INFORMATION Important Safety Information Verify Line Voltage Before Use Your AVR 230 has been designed for use with 120-volt AC current. Connection to a line voltage other than that for which it is intended can create a safety and fire hazard and may damage the unit. If you have any questions about the voltage requirements for your specific model, or about the line voltage in your area, contact your selling dealer before plugging the unit into a wal
Document Preview & Text Transcription (Main Page)
Click to expand and read text
DIGITAL LOGIC 7 VID 1 DVD CD FMAM TAPE 6 8 CH VID 2 VID 3 VID 4 PRO LOGIC 3 STEREO DSP 5 CH. STEREO SURR. OFF AVR 230 AUDIO/VIDEO RECEIVER OWNER’S MANUAL Power for the Digital Revolution. ® ®

Harman Kardon AVR 230 Quick start manual [PDF] (4 pages)

  • Identifier: id-419112
  • Brand: Harman Kardon
  • Device: AVR 230 Receiver
  • Type: PDF
  • Key Aspects: Hardware Verification Checklists, Unpacking and Inspection Guidelines, Emergency Shutdown Procedures
  • UPD Date: 10.05.2026
  • Source File: 398721.pdf
  • Pages: 4
  • Description: Operating handbook for the Harman Kardon AVR 230.
Pages Preview:
  • AVR 230 QUICK-START GUIDE Figure 2 – Speaker Connections Step 2. Connect the speakers to the receiver: red (+) on speaker to colored (+) on receiver and black (–) to black (–). (See page 13.) Step 3. Connect the Subwoofer Pre-Out jack to the Line-In jack on your subwoofer (see page 13). You may adjust the settings on the subwoofer later as needed. Figure 3 – How to Use the Binding-Post Speaker Terminal SURROUND BACK SPEAKER FRONT RIGHT SPEAKER FRON
  • SPEAKER AND AUDIO CONNECTIONS CD PLAYER AM Antenna FM Antenna AUDIO RECORDER L R Optical Coax REC/IN PLAY/OUT Step 4. Connect AM and FM antennas (as shown above). (See page 13.) Step 5. Connect source components, as shown in Figures 4 and 5, and the Device Connection Options chart on the back of this Guide (see pages 13–14). AUDIO connections: Right channel (red) on source to right (red) on AVR, and left channel
  • DVD PLAYER VCR (Video 1) TV or Video Monitor In/Rec Out/Play IN L R VIDEO Video S-Video Component Video Y Pb Pr Component Video Y Pb Pr Component Video Y Pb Pr Optical Coax Cable or Sat or HDTV Set-Top Box (Video 2) OUT L R Video S-Video Optical Coax L
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Thank you for purchasing a Harman Kardon AVR 230. This Quick-Start Guide will help you with a basic system installation. For detailed information on any step in this Guide, please refer to the pages referenced in the Owner’s Manual. We strongly recommend that you read the Owner’s Manual for complete details on how to install, configure and operate the AVR 230, as well as for the important safety information it contains. Figure 1 – Speaker Placement The colors shown for each speaker correspond to the matching output terminal connection on the back of the AVR 230 (see page 7). FRONT LEFT SPEAKER (White) SURROUND BACK SPEAKER (Brown) CENTER SPEAKER (Green) SUBWOOFER (Purple) SURROUND LEFT SPEAKER (Blue) FRONT RIGHT SPEAKER (Red) SURROUND RIGHT SPEAKER (Gray) Step 1. Place your speakers in the listening room (see page 15). SPEAKER PLACEMENT AVR 230 QUICK-START GUIDE Connections Color Guide Audio Connections Left Right Front Center Surround Subwoofer Surround Back Digital Audio Connections Coax Optical Video Connections Composite S-Video Match the colored jacks on the AVR 230 to the appropriate jacks on your source equipment or speakers.The colors are standardized, but not all equipment or connectors use them.

Harman Kardon AVR 230 Reference manual [PDF] (1 pages)

  • Identifier: id-60894
  • Brand: Harman Kardon
  • Device: AVR 230 Receiver
  • Type: PDF
  • Key Aspects: Package Contents and Accessories List, Efficiency and Calibration Tips, Product Performance Metrics
  • UPD Date: 29.06.2026
  • Source File: 398722.pdf
  • Pages: 1
  • Description: Essential instructions for the Harman Kardon AVR 230.
Pages Preview:
Document Preview & Text Transcription (Main Page)
Click to expand and read text
DIGITAL LOGIC 7 VID 1 DVD CD FMAM TAPE 6 8 CH VID 2 VID 3 VID 4 PRO LOGIC 3 STEREO DSP 5 CH. STEREO SURR. OFF 1 2 Ú  ( * 8 ) ! @ ) & % 3 4 ˘ ¯ ˜ 5 9 $ ^ Ò Ó ¸ ˆ ı Ù Û Ô # 7 6 AVR 230 FRONT-PANEL CONTROLS 1 Main Power Switch 2 Power Indicator 3 Standby/On Switch 4 Headphone Jack 5 Tone Mode 6 Speaker Selector 7 Surround Mode Group Selector 8 Surround Mode Selector 9 Tuning Selector ) ‹/› Buttons ! Tuner Band Selector @ Set Button # Digital Input Selector $ Preset Station Selector % Delay Adjust Selector ^ Input Source Selector & Tuner Mode Selector * Optical 3 Digital Input ( Coaxial 3 Digital Input Ó Video 4 Video Input Jacks Ô Video 4 Audio Input Jacks Bass Control Ò Balance Control Ú Treble Control Û Channel Adjust Selector Ù Volume Control ı Input Indicators ˆ Speaker/Channel Input Indicators ˜ Upper Display Line ¯ Lower Display Line ˘ Surround Mode Indicators ¸ Remote Sensor Window

Harman Kardon AVR 230 Service manual [PDF] (121 pages)

  • Identifier: id-1071749
  • Brand: Harman Kardon
  • Device: AVR 230 Receiver
  • Type: PDF
  • Key Aspects: Safety Recommendations and Warnings, Troubleshooting Information, Basic Configuration Guidelines
  • UPD Date: 24.08.2026
  • Source File: 1086651.pdf
  • Pages: 121
  • Description: Technical reference manual for the Harman Kardon AVR 230.
Pages Preview:
  • Each precaution in this manual should be followed during servicing. Components identified with the IEC symbol in the parts list are special significance to safety. When replacing a component identified with , use only the replacement parts designated, or parts with the same ratings or resistance, wattage, or voltage that are designated in the parts list in this manual. Leakage-current or resistance measurements must be made to determine that exposed parts
  • SAFETY PRECAUTIONS The following check should be performed for the continued protection of the customer and service technician. LEAKAGE CURRENT CHECK Measure leakage current to a known earth ground (water pipe, conduit, etc.) by connecting a leakage current tester between the earth ground and all exposed metal parts of the appliance (input/output terminals, screwheads, metal overlays, control shaft, etc.). Plug the AC line cord of the appliance directly in
  • TECHNICAL SPECIFICATIONS 4 AVR 230 TECHNICAL SPECIFICATIONS Audio Section Stereo Mode Continuous Average Power (FTC) 65 Watts per channel, 20Hz–20kHz, @ <0.07% THD, both channels driven into 8 ohms Six-Channel Surround Modes Power per Individual Channel Front L&R channels: 50 Watts per channel @ <0.07% THD, 20Hz–20kHz into 8 ohms Center channel: 50 Watts @ <0.07% THD, 20Hz–20kHz into 8 ohms Surround (L & R Side, L & R back) channels: 50 Watts per cha
Document Preview & Text Transcription (Main Page)
Click to expand and read text
harman/kardon AVR230 6 X 50W 5.1/7.1 CHANNEL A/V RECEIVER SERVICE MANUAL CONTENTS ESD WARNING……………………………….2 LEAKAGE TESTING……………….…..…....3 BASIC SPECIFICATIONS…………………..4 FRONT PANEL CONTROLS………..…..…..5 REAR PANEL CONNECTIONS………….…7 REMOTE CONTROL FUNCTIONS……….10 TROUBLESHOOTING GUIDE…...……..…13 PROCESSOR RESET……………….….…..13 DISASSEMBLY………………………………14 BULLETIN HK2003-10…….........................15 TECH TIP HKTT2003-01……………..…….17 UNIT EXPLODED VIEW…………………....18 BLOCK DIAGRAM……………….…………19 AMP BIAS ADJUSTMENT………………....20 PCB DRAWINGS……………….……..……21 ELECTRICAL PARTS LIST…….………….27 SEMICONDUCTOR PINOUTS……………63 SCHEMATICS………………………………104 WIRING DIAGRAM…………………….......120 PACKAGING…………………………..……121 harman/kardon, Inc. 250 Crossways Park Dr. Woodbury, New York 11797 Rev1 11/2004

Harman Kardon AVR 230 Service manual [PDF] (111 pages)

  • Identifier: id-1271324
  • Brand: Harman Kardon
  • Device: AVR 230 Receiver
  • Type: PDF
  • Key Aspects: End-of-Life Handling and Disposal, Safety Recommendations and Warnings, Product Performance Metrics
  • UPD Date: 14.06.2026
  • Source File: 1267217.pdf
  • Pages: 111
  • Description: Product usage manual for the Harman Kardon AVR 230.
Pages Preview:
  • Each precaution in this manual should be followed during servicing. Components identified with the IEC symbol in the parts list are special significance to safety. When replacing a component identified with , use only the replacement parts designated, or parts with the same ratings or resistance, wattage, or voltage that are designated in the parts list in this manual. Leakage-current or resistance measurements must be made to determine that exposed parts
  • 4 AVR 1650/AVR 165 Front-Panel Controls Front-Panel Controls Power Indicator Message Display Volume Knob Surround Mode Select Buttons Set Button IR Sensor Power Button Left/Right Buttons Headphone Jack/ EzSet/EQ Mic Connector Source Select Buttons Tuning Mode Button Digital Input Button Surround-Mode Category Button Up/Down Buttons/ Tuning Buttons USB Port Aux Analog Audio Input Connector Channel Level Control Button Harman Kardon AVR 165/230V Service Manu
  • 5 AVR 1650/AVR 165 ENGLISH Front-Panel Controls, continued Front-Panel Controls, continued Power indicator: This LED has three possible modes: LED is off: Indicates that the AVR is unplugged or the rear-panel Main Power switch •• is off. LED glows amber: Indicates that the AVR is in the Standby mode. •• LED glows white: Indicates that the AVR is turned on. •• IMPORTANT NOTE: If the PROTECT message ever appears on the AVR’s front-panel Message
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Harman Kardon Service Manual AVR 165/230 5.1 CHANNEL A/V RECEIVER Released EU2011 Harman Consumer Group, Inc. Rev 0, 10/2011 8500 Balboa Boulevard Northridge, California 91329 CONTENTS EXPLODED VIEW AND PARTS 15 PARTS LIST 16 IC PINOUTS 40 PCB DRAWINGS 87 BLOCK DIAGRAMS 97 WIRING DIAGRAM 99 AMP BIAS ADJUSTMENT 100 SCHEMATIC DIAGRAMS 101-111 ESD WARNING 2 FRONT AND REAR PANELS 3 REMOTE CONTROL 7 RESET REMOTE AND PROCESSOR 9 TROUBLESHOOTING GUIDE 10 BASIC SPECIFICATIONS 11 PACKAGE LISTS AND PARTS 13 DISASSEMBLY 14

Harman Kardon AVR 230 Service manual [PDF] (125 pages)

  • Identifier: id-1217038
  • Brand: Harman Kardon
  • Device: AVR 230 Receiver
  • Type: PDF
  • Key Aspects: Unpacking and Inspection Guidelines, Recommended Spare Parts List, Critical Operational Precautions
  • UPD Date: 08.04.2026
  • Source File: 941235.pdf
  • Pages: 125
  • Description: Professional manual for the Harman Kardon AVR 230.
Pages Preview:
  • Each precaution in this manual should be followed during servicing. Components identified with the IEC symbol in the parts list are special significance to safety. When replacing a component identified with , use only the replacement parts designated, or parts with the same ratings or resistance, wattage, or voltage that are designated in the parts list in this manual. Leakage-current or resistance measurements must be made to determine that exposed parts
  • SAFETY PRECAUTIONS The following check should be performed for the continued protection of the customer and service technician. LEAKAGE CURRENT CHECK Measure leakage current to a known earth ground (water pipe, conduit, etc.) by connecting a leakage current tester between the earth ground and all exposed metal parts of the appliance (input/output terminals, screwheads, metal overlays, control shaft, etc.). Plug the AC line cord of the appliance directly in
  • TECHNICAL SPECIFICATIONS 4 AVR 230 TECHNICAL SPECIFICATIONS Audio Section Stereo Mode Continuous Average Power (FTC) 65 Watts per channel, 20Hz–20kHz, @ <0.07% THD, both channels driven into 8 ohms Six-Channel Surround Modes Power per Individual Channel Front L&R channels: 50 Watts per channel @ <0.07% THD, 20Hz–20kHz into 8 ohms Center channel: 50 Watts @ <0.07% THD, 20Hz–20kHz into 8 ohms Surround (L & R Side, L & R back) channels: 50 Watts per cha
Document Preview & Text Transcription (Main Page)
Click to expand and read text
harman/kardon AVR230 6 X 50W 5.1/7.1 CHANNEL A/V RECEIVER SERVICE MANUAL CONTENTS ESD WARNING……………………………….2 LEAKAGE TESTING……………….…..…....3 BASIC SPECIFICATIONS…………………..4 FRONT PANEL CONTROLS………..…..…..5 REAR PANEL CONNECTIONS………….…7 REMOTE CONTROL FUNCTIONS……….10 TROUBLESHOOTING GUIDE…...……..…13 PROCESSOR RESET……………….….…..13 DISASSEMBLY………………………………14 BULLETIN HK2003-10…….........................15 TECH TIP HKTT2004-03……………………17 TECH TIP HKTT2003-01……………..…….21 UNIT EXPLODED VIEW…………………....22 BLOCK DIAGRAM……………….…………23 AMP BIAS ADJUSTMENT………………....24 PCB DRAWINGS……………….……..……25 ELECTRICAL PARTS LIST…….………….31 SEMICONDUCTOR PINOUTS……………67 SCHEMATICS………………………………108 WIRING DIAGRAM…………………….......124 PACKAGING…………………………..……125 harman/kardon, Inc. 250 Crossways Park Dr. Woodbury, New York 11797 Rev1 7/2005 www.freeservicemanuals.info It`s Free www.freeservicemanuals.info

Harman Kardon AVR 230 Service manual [PDF] (131 pages)

  • Identifier: id-1071750
  • Brand: Harman Kardon
  • Device: AVR 230 Receiver
  • Type: PDF
  • Key Aspects: Technical Support and Resource Links, Hardware Setup Instructions, Error Code Explanations
  • UPD Date: 09.04.2026
  • Source File: 1086650.pdf
  • Pages: 131
  • Description: Operation guide for the Harman Kardon AVR 230.
Pages Preview:
  • Each precaution in this manual should be followed during servicing. Components identified with the IEC symbol in the parts list are special significance to safety. When replacing a component identified with , use only the replacement parts designated, or parts with the same ratings or resistance, wattage, or voltage that are designated in the parts list in this manual. Leakage-current or resistance measurements must be made to determine that exposed parts
  • Technical Specifications Audio Section Stereo Mode Continuous Average Power (FTC) 65 Watts per channel, 20Hz–20kHz, @ < 0.07% THD, both channels driven into 8 ohms 7 Channel Surround Modes Power Per Individual Channel Front L&R channels: 50 Watts per channel, @ < 0.07% THD, 20Hz–20kHz into 8 ohms Center channel: 50 Watts, @ < 0.07% THD, 20Hz–20kHz into 8 ohms Surround (L & R Side, Back) channels: 50 Watts per channel, @ < 0.07% THD, 20Hz–20kHz into
  • Troubleshooting Guide Processor Reset In the rare case where the unit’s operation or the displays seem abnormal, the cause may involve the erratic operation of the system’s memory or microprocessor. To correct this problem, first unplug the unit from the AC wall outlet and wait at least three minutes. After the pause, reconnect the AC power cord and check the unit’s operation. If the system still malfunctions, a system reset may clear the problem. To
  • 2. Package Drawing AVR247/230 ACCESSORY-1 BOX,OUT CARTON 3 4 1 DESCRIPTION NO CPS6A564 CQXAVR247/230 CPG1A822U 1 1 1 Q,ty PARTS NO. CPS6A565 SNOW,PAD(R) 2 1 SNOW,PAD(L) SET AVR247/230SET 1 5 ACCESSORY-2 6 CQXAVR247/230 1 ACCESSORY-1 1 SNOW PAD (R) 3 BOX ,OUT CARTON 5 SET 4 SNOW PAD (L) 2 MICROPHONE ASS'Y 7 ACCESSORY-2 6 MICROPHONE ASS'Y 7 CJXAVR340MICRO 1 NO DESCRIPTION PARTS NO. Q,ty 1 2 3 4 5 1 7 1 1 FM 1 POL ANT CSA1A018Z 1 NO DESCRIPTION PARTS NO. Q,ty
Document Preview & Text Transcription (Main Page)
Click to expand and read text
harman/kardon Service Manual AVR247/230 5 x 50W 7.1 CHANNEL A/V RECEIVER CONTENTS ESD WARNING………………………..…..2 ELECTRICAL PARTS LIST…….…..…12 BASIC SPECIFICATIONS........................3 SEMICONDUCTOR PINOUTS…....….54 TROUBLESHOOTING GUIDE.................4 PCB DRAWINGS…………………..…110 PROCESSOR RESET..............................4 BLOCK DIAGRAM.............................119 PACKAGE LIST AND PARTS…...............5 WIRING DIAGRAM……………..….…120 DISASSEMBLY.........................................6 AMP BIAS ADJUSTMENT...…...…....121 UNIT EXPLODED VIEW AND PARTS…11 SCHEMATIC DIAGRAMS...………....122 Released EU2008 harman/kardon, Inc. Rev 0, 05/2008 250 Crossways Park Dr. Woodbury, New York, 11797 harman/kardon AVR247/230 Service Manual Page 1 of 131

Harman Kardon AVR 230 Service manual [PDF] (144 pages)

  • Identifier: id-1071754
  • Brand: Harman Kardon
  • Device: AVR 230 Receiver
  • Type: PDF
  • Key Aspects: Initial Startup Checklist, Advanced Configuration Methods, Step-by-Step Assembly Procedures
  • UPD Date: 01.04.2026
  • Source File: 1086646.pdf
  • Pages: 144
  • Description: Operation instructions for the Harman Kardon AVR 230.
Pages Preview:
  • Each precaution in this manual should be followed during servicing. Components identified with the IEC symbol in the parts list are special significance to safety. When replacing a component identified with , use only the replacement parts designated, or parts with the same ratings or resistance, wattage, or voltage that are designated in the parts list in this manual. Leakage-current or resistance measurements must be made to determine that exposed parts
  • Technical Specifications Audio Section Stereo Mode Continuous Average Power (FTC) 65 Watts per channel, 20Hz–20kHz, @ < 0.07% THD, both channels driven into 8 ohms 7 Channel Surround Modes Power Per Individual Channel, all channels driven simultaneously: Front L&R channels: 50 Watts per channel, @ < 0.07% THD, 20Hz–20kHz into 8 ohms Center channel: 50 Watts, @ < 0.07% THD, 20Hz–20kHz into 8 ohms Surround (L & R Side, Back) channels: 50 Watts per chan
  • Troubleshooting Guide Processor Reset In the rare case where the unit’s operation or the displays seem abnormal, the cause may involve the erratic operation of the system’s memory or microprocessor. To correct this problem, first unplug the unit from the AC wall outlet and wait at least three minutes. After the pause, reconnect the AC power cord and check the unit’s operation. If the system still malfunctions, a system reset may clear the problem. T
  • Programming the Remote Notes on Using the AVR Remote With Other Devices. • Manufacturers may use different code sets for the same product category. For that reason, it is important that you check to see if the code set you have entered operates as many controls as possible. If it appears that only a few functions operate, check to see if another code set will work with more buttons. • Depending on the brand and product type used the functions listed in
Document Preview & Text Transcription (Main Page)
Click to expand and read text
harman/kardon Service Manual AVR 255/230 7 x 50W 7.1 CHANNEL A/V RECEIVER CONTENTS ESD WARNING 2 BASIC SPECIFICATIONS 3 TROUBLESHOOTING GUIDE 4 PROCESSOR RESET 4 REMOTE RESET 5 PACKAGE LIST AND PARTS 6 DISASSEMBLY 7 EXPLODED VIEW AND PARTS 8 ELECTRICAL PARTS LIST 9 SEMICONDUCTOR PINOUTS 50 PCB DRAWINGS 121 BLOCK DIAGRAM 129 WIRING DIAGRAM 130 AMP BIAS ADJUSTMENT 131 SCHEMATIC DIAGRAMS 132 Released EU2008 harman/kardon, Inc. Rev 0, 07/2008 250 Crossways Park Dr. Woodbury, New York, 11797 harman/kardon AVR 255/230 Service Manual Page 1 of 144

Harman Kardon AVR 230 Service manual [PDF] (131 pages)

  • Identifier: id-1271325
  • Brand: Harman Kardon
  • Device: AVR 230 Receiver
  • Type: PDF
  • Key Aspects: Device Specifications Overview, User Training Recommendations, Cleaning and Sanitization Methods
  • UPD Date: 31.03.2026
  • Source File: 1267216.pdf
  • Pages: 131
  • Description: Product operation manual for the Harman Kardon AVR 230.
Pages Preview:
  • Each precaution in this manual should be followed during servicing. Components identified with the IEC symbol in the parts list are special significance to safety. When replacing a component identified with , use only the replacement parts designated, or parts with the same ratings or resistance, wattage, or voltage that are designated in the parts list in this manual. Leakage-current or resistance measurements must be made to determine that exposed parts
  • Composite Analog AVR Info Resolution Audio Effects Video Modes Surround Modes Back/Exit Source List M N L K OK 260 B C D  2 1 6 7 8 9 A E 4 5 J I G H 3 F 5 4 FRONT-PANEL CONTROLS 0 Volume Control: Turn this knob clockwise to increase the volume, counterclockwise to decrease the volume. If the AVR is muted, ­adjusting volume control will automatically release the unit from the silenced condition. 1 System Power Control: When the Main Power Switch on the
  • 7 ENGLISH FRONT-PANEL CONTROLS D Speaker/Channel Input Indicators: These indicators are multipurpose, indicating either the speaker type selected for each channel or the incoming data-signal configuration. The left, center, right, right surround and left surround speaker indicators are composed of three boxes, while the subwoofer is a single box. The center box lights when a “Small” speaker is selected, and the two outer boxes light when “Large” s
Document Preview & Text Transcription (Main Page)
Click to expand and read text
harman/kardon Service Manual AVR 260/230 7 x 50W 7.1 CHANNEL A/V RECEIVER CONTENTS EXPLODED VIEW AND PARTS 14 ELECTRICAL PARTS LIST 15 SEMICONDUCTOR PINOUTS 49 PCB DRAWINGS 109 BLOCK DIAGRAM 116 WIRING DIAGRAM 117 AMP BIAS ADJUSTMENT 118 SCHEMATIC DIAGRAMS 119-131 ESD WARNING 2 FRONT AND REAR PANELS 3 REMOTE CONTROL 8 TROUBLESHOOTING GUIDE 10 PROCESSOR RESET 10 BASIC SPECIFICATIONS 11 PACKAGE LISTS AND PARTS 12 DISASSEMBLY 13 Released EU2010 Harman Consumer Group, Inc. Rev 0, 07/2010 8500 Balboa Boulevard Northridge, California 91329 harman/kardon AVR 260/230 Service Manual Page 1 of 131

Harman Kardon AVR 230 Service manual [PDF] (125 pages)

  • Identifier: id-1271326
  • Brand: Harman Kardon
  • Device: AVR 230 Receiver
  • Type: PDF
  • Key Aspects: FAQ Section for Common Queries, Common Issue Diagnostic Flows, Best Practices for Everyday Use
  • UPD Date: 23.07.2026
  • Source File: 1267215.pdf
  • Pages: 125
  • Description: Detailed operating instructions for the Harman Kardon AVR 230.
Pages Preview:
  • Each precaution in this manual should be followed during servicing. Components identified with the IEC symbol in the parts list are special significance to safety. When replacing a component identified with , use only the replacement parts designated, or parts with the same ratings or resistance, wattage, or voltage that are designated in the parts list in this manual. Leakage-current or resistance measurements must be made to determine that exposed parts
  • Technical Specifications Audio Section Stereo Mode Continuous Average Power (FTC): 70 Watts per channel, 20Hz - 20 kHz @ < 0.07% THD, both channels driven into 8 ohms 7 Channel Surround Modes Power Per Individual Channel, with all channels driven Front L&R channels: 65 Watts per channel @ < 0.07% THD, 20Hz–20kHz into 8 ohms Center channel: 65 Watts @ < 0.07% THD, 20Hz–20kHz into 8 ohms Surround (L & R Side, Back) channels: 65 Watts per channel @ < 0.07
  • Troubleshooting Guide Processor Reset In the rare case where the unit’s operation or the displays seem abnormal, the cause may involve the erratic operation of the system’s memory or microprocessor. To correct this problem, first unplug the unit from the AC wall outlet and wait at least three minutes. After the pause, reconnect the AC power cord and check the unit’s operation. If the system still malfunctions, a system reset may clear the problem. T
Document Preview & Text Transcription (Main Page)
Click to expand and read text
harman/kardon Service Manual AVR 355/230 7 x 65W 7.1 CHANNEL A/V RECEIVER Released EU2008 harman/kardon, Inc. Rev 0, 09/2008 250 Crossways Park Dr. Woodbury, New York, 11797 ESD WARNING 2 BASIC SPECIFICATIONS 3 TROUBLESHOOTING GUIDE 4 PROCESSOR RESET 4 REMOTE RESET 5 PACKAGE LIST AND PARTS 6 DISASSEMBLY 7 EXPLODED VIEW AND PARTS 8 ELECTRICAL PARTS LIST 9 SEMICONDUCTOR PINOUTS 56 PCB DRAWINGS 101 BLOCK DIAGRAM 109 WIRING DIAGRAM 110 AMP BIAS ADJUSTMENT 111 SCHEMATIC DIAGRAMS 112 CONTENTS harman/kardon AVR 355/230 Service Manual Page 1 of 125

Harman Kardon AVR 230 Service manual [PDF] (138 pages)

  • Identifier: id-1071753
  • Brand: Harman Kardon
  • Device: AVR 230 Receiver
  • Type: PDF
  • Key Aspects: Technical Data and Parameters, Information on Regular Maintenance, Hardware Setup Instructions
  • UPD Date: 13.03.2026
  • Source File: 1086647.pdf
  • Pages: 138
  • Description: Instruction guide for the Harman Kardon AVR 230.
Pages Preview:
  • Each precaution in this manual should be followed during servicing. Components identified with the IEC symbol in the parts list are special significance to safety. When replacing a component identified with , use only the replacement parts designated, or parts with the same ratings or resistance, wattage, or voltage that are designated in the parts list in this manual. Leakage-current or resistance measurements must be made to determine that exposed parts
  • 7 460 Set up MIC ENGLISH FRONT-PANEL CONTROLS Power indicator Standby/On Switch Info Settings OK USB Port Digital Audio Inputs (Optical and Coaxial Front) Headphone Jack/ EzSet/EQ™ Microphone Input Back/Exit Audio Effects Surround Modes Analog Audio Front Inputs KL Navigation M N Navigation Remote IR Sensor Setup Message Display Volume Power Indicator: This LED has three possible modes: Main Power Off •• : When the AVR is unplugged or the Main Power
  • 9 ENGLISH Coaxial Digital Audio Output Subwoofer Output Analog 1-5 Inputs Fan Vents Optical 1-3 Digital Audio Inputs (AVR 360: Optical 1-2) Analog 2 & 4 Outputs Video 2 Output Component 1-2 Inputs The Bridge III Zone 2 IR Input Component Video Monitor Output AC Power Input REAR-PANEL CONNECTIONS Main Power Switch: This mechanical switch turns the power supply on or off. It is usually left on, and cannot be turned on or off using the remote control. 6-/8-Ch
  • 11 Info Back/Exit Menu OFF ZR60 LEARN SETUP INFO SLEEP ENGLISH REMOTE CONTROL FUNCTIONS IR Transmitter Mute Source Selectors Transport Controls Zone Indicator Menu KLM N Navigation OK Sleep Settings AVR Settings IR Transmitter Lens AVR Power Off AVR Power On Device Power On Device Power Off Video Modes Surround Modes Activity Menu KLM N Navigation OK Disc Menu Channel Transport Controls Sleep Settings Power Off Back/Exit Volume Controls Zone Selector Sourc
Document Preview & Text Transcription (Main Page)
Click to expand and read text
harman/kardon Service Manual AVR 360/230 7 x 50W 7.1 CHANNEL A/V RECEIVER CONTENTS EXPLODED VIEW AND PARTS 12 ELECTRICAL PARTS LIST 13 SEMICONDUCTOR PINOUTS 46 PCB DRAWINGS 116 BLOCK DIAGRAM 123 WIRING DIAGRAM 124 AMP BIAS ADJUSTMENT 125 SCHEMATIC DIAGRAMS 126-138 ESD WARNING 2 FRONT AND REAR PANELS 3 REMOTE CONTROLS 5 TROUBLESHOOTING GUIDE 8 PROCESSOR RESET 8 BASIC SPECIFICATIONS 9 PACKAGE LISTS AND PARTS 10 DISASSEMBLY 11 Released EU2010 Harman Consumer Group, Inc. Rev 0, 03/2010 8500 Balboa Boulevard Northridge, California 91329 harman/kardon AVR 360/230 Service Manual Page 1 of 138

Harman Kardon AVR 230 Service manual [PDF] (176 pages)

  • Identifier: id-1242526
  • Brand: Harman Kardon
  • Device: AVR 230 Receiver
  • Type: PDF
  • Key Aspects: Model Variations and Compatibility, End-of-Life Handling and Disposal, Package Contents and Accessories List
  • UPD Date: 03.04.2026
  • Source File: 915743.pdf
  • Pages: 176
  • Description: Owner’s manual for the Harman Kardon AVR 230.
Pages Preview:
  • Each precaution in this manual should be followed during servicing. Components identified with the IEC symbol in the parts list are special significance to safety. When replacing a component identified with , use only the replacement parts designated, or parts with the same ratings or resistance, wattage, or voltage that are designated in the parts list in this manual. Leakage-current or resistance measurements must be made to determine that exposed parts
  • AVR 4 Front-Panel Controls Front-Panel Controls Continued on next page power Indicator message display volume knob video modes button Setup button Ir Sensor power button left/right buttons headphone Jack/ ezSet/eq mic Input back/exit button resolution button Audio effects button Surround modes button up/down buttons uSb port ok button hdmI® front Input connector Info button Source list button Harman Kardon AVR 365/230V Service Manual Page 3 of 176
  • AVR 5 ENGLISH Front-Panel Controls, continued Power Indicator: this led has three possible modes: • led is off: Indicates that the Avr is unplugged or the rear-panel main power switch is off. led glows amber: Indicates that the Avr is in the Standby mode. • led glows white: Indicates that the Avr is turned on. • IMPORTANT NOTE: If the protect message ever appears on the Avr’s front- panel message display, turn off the Avr and unplug it from the
  • AVR 6 Rear-Panel Connectors Rear-Panel Connectors Analog Record Out connector: connect this analog audio output to the analog audio input of a recording device. A signal is available at this output whenever an analog audio source is playing. HDMI Monitor Out connector: If your tv has an hdmI connector, use an hdmI cable (not included) to connect it to the Avr’s hdmI monitor out connector. the Avr will automatically transcode component and composite video
  • AVR 7 ENGLISH Rear-Panel Connectors, continued Rear-Panel Connectors, continued Composite Video Monitor Out connector: If your tv or video display does not have an hdmI connector, use a composite video cable (not included) to connect the Avr’s composite video monitor out connector to your tv’s composite video input. NOTE: the hdmI connection to your tv is preferred. If you use the composite video connection to your tv, you will not be able to view the
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Harman Kardon Service Manual AVR 365/230 7.1 CHANNEL A/V RECEIVER Released EU2011 Harman Consumer Group, Inc. Rev 0, 09/2011 8500 Balboa Boulevard Northridge, California 91329 CONTENTS DISASSEMBLY 22 EXPLODED VIEW AND PARTS 23 ELECTRICAL PARTS LIST 24 SEMICONDUCTOR PINOUTS 59 PCB DRAWINGS 136 BLOCK DIAGRAMS 155 WIRING DIAGRAM 157 AMP BIAS ADJUSTMENT 158 SCHEMATIC DIAGRAMS 159-176 ESD WARNING 2 FRONT AND REAR PANELS 3 REMOTE CONTROLS 7 SETTINGS LOCK 11 UPDATING NETWORK SOFTWARE 12 RESET REMOTE AND PROCESSOR 13 TROUBLESHOOTING GUIDE 14 BASIC SPECIFICATIONS 15 APPENDIX, SETTINGS 16 PACKAGE LISTS AND PARTS 21 DISASSEMBLY 11 Harman Kardon AVR 365/230V Service Manual Page 1 of 176

Harman Kardon AVR 230 Service manual [PDF] (37 pages)

  • Identifier: id-1071751
  • Brand: Harman Kardon
  • Device: AVR 230 Receiver
  • Type: PDF
  • Key Aspects: Recommended Spare Parts List, Warranty and Service Information, Cleaning and Sanitization Methods
  • UPD Date: 29.06.2026
  • Source File: 1086649.pdf
  • Pages: 37
  • Description: Device instruction guide for the Harman Kardon AVR 230.
Pages Preview:
  • harman/kardon AVR435/230 PACKING LIST NO AVR435 DESCRIPTION Q'TY 1 ZKD2073HA00 LABEL BARCODE AVR435 EU 2 2 ZKD2004HA00 BOX CARTON AVR435 EU 1 3 H03-WAD01200303 ANTENNA WIRE 75 OHM WIRE CT03-FM 00 1 4 H03-ATALF039ABK ANTENNA WIRE ANTENNA LOOP CT01-AM 1 5 BTA3A1511SF BATTERY ALKALINE 1.5V AAA 2 6 ZBP00020350 POLYBAG BATTERY 1 7 ZKD1202HA00 CARTON BOX MIC 1 8 H03-MCD12TWBKNN AVR635/435 MICROPHONE ASSY 1 9 ZBP00161851 BAG PE 160X180MM 1 10 H03-ZPD1212INBK MICR
Document Preview & Text Transcription (Main Page)
Click to expand and read text
AVR 435/230 SERVICE MANUAL harman/kardon® Power for the Digital Revolution®
More Documents for Harman Kardon AVR 230
Document Pages
Harman Kardon AVR 230 Service manual 142
Harman Kardon AVR 230 Owner's manual 14

Harman Kardon AVR 230: Home Theater System, Receiver, Stereo Receiver Category Related Instructions

HTB3570
Philips HTB3570
24.07.2026 12 pages

HTB3570 Quick start guide Register your product and get support at www.philips.com/welcome Always there to help you Question? Contact Philips Comprehensive operating guide for the Philips HTB3570 Home Theater System. This guide includes detailed instructions for shutdown procedures, device reset instructions, safety information.

HTA-1150
Akai HTA-1150
30.05.2026 23 pages

SERVICE MANUAL Model: HTA1150 HOME THEATER SYSTEM www.akai.ru Advanced user guide for the Akai HTA-1150 Home Theater System. It details device setup and technical guidelines, device overview, assembly reference, replacement parts.

HTL3110B/05
Philips HTL3110B/05
02.04.2026 21 pages

www.philips.com/support Register your product and get support at Practical operating guide for the Philips HTL3110B/05 Home Cinema speakers. The manual elaborates on features and installation steps, software updates, installation guides, maintenance.

Compaq Presario,Presario CQ5110F
HP Compaq Presario,Presario CQ5110F
24.03.2026 1 pages

FireWire FireWire® USB 2.0 11 33 44 Copyright © 2005–2006 Hewlett-Packard Development Company, L.P. Printed in Location, availability, and number of connectors may vary. L’emplacement, la disponibilité et le nombre de connecteurs peuvent varier. A local User operation guide for the HP Compaq Presario,Presario CQ5110F Desktop. This documentation explains configuration and setup guidelines, troubleshooting, assembly reference.