Haverland TRD 300 Manuals

1 2h Oh 2 4 6 8 10 12 14 16 18 20 22 24 2 3 4 6 5 DESCRIPTION The TRD300 is an infrared remote control device designed to configure and control the operating power level of RCW electric radiators. Of modern, elegant design, it has a good-sized display which informs the user of all the enabled functions, such as the predetermined temperature setting, date and time. User-friendly, with its 7-key keyboard, it offers easy access to all operating modes (the key, for example, allows rapid activation of the ECONOMY mode). It is delivered with a wall mounting kit. A double infrared transmitter allows the user to control the radiator(s) without having to remove the remote control device from its wall mounting • 7 operating modes: MODES Radiator operation COMFORT Regulation to predetermined temperature setting. ECONOMY Regulation to a predetermined temperature setting. When switching from COMFORT mode to ECONOMY mode, the set-point value is automatically reduced by 3.5°C (and vice versa: switching from ECONOMY mode to COMFORT mode automatically increases the set-point value by 3.5°C). It is recommended to use this operating mode at night or if the room is not occupied for a period of 2 hours or longer. FROST PROTECTION Regulation to predetermined FROST PROTECTION temperature setting set on each of the radiators (refer to the manual for the radiator(s)). PROGRAMMING • Choice of 9 predetermined factory programs (P1 to P9) • 5 customizable weekly programs (U1 to U5). • The predetermined temperature settings COMFORT and ECONOMY are configured on the radiator(s). BOOST Override control for maximum heating (no set-point value regulation) for 2 hours. SLEEP Regulation controlled directly by the radiators’ thermostat(s). The remote control device is disabled. HOLIDAY Override setting of a specified power level (COMFORT, ECONOMY, FROST PROTECTION, OFF), until a given date and time, starting from a given date and time and for a period of at most 1 year. • Permanent display of the time and the mode activated. • The thermostat’s keyboard can be locked to prevent any unintentional change to the settings. In that case all the thermostat’s keys are disabled. NB: some functions may not be accessible in the thermostat of your device. Please refer to the manual for your device. • White colour. • LCD screen. • 7-key keyboard. • Temperature settings: digital. • Mode settings: digital. • 7 operating modes. • Keyboard lock. • Temperature range: 7°C / 32°C (± 0.5°C). • Operating temperature: -10°C / +40°C. • Power supply by 2 alkaline batteries, 1.5 V, AAA type (warning: no rechargeable batteries). • Battery wear indicator light. • Double infrared transmitter. • Dimensions (with wall mounting) (L x H x D): 42 x 100 x 27 mm. • Special wall mounting provided. The TRD 300 programmer requires no physical connection to any heating equipment or other items required for regulation (e.g. temperature sensor). Its location has no influence on the quality of regulation. It must therefore simply be installed in a place accessible to the occupants of the home, in such a way that the monitor screen on the front panel is always left visible. The places most commonly preferred are the living- room, the entrance or a central corridor. Setup 1. Remove the programmer from its base. 2. Raise the protective cover on the battery slot. 3. Insert the batteries, taking care to observe the polarities (+ and -). 4. Close the protective cover again. Replacement 1. When the BATT message is displayed on screen, it is recommended to replace the batteries rapidly to avoid any possible battery damage (the guarantee does not cover damage due to battery leakage). 2. Remove the programmer from its base. 3. Raise the protective cover on the battery slot. 4. Replace the batteries, taking care to observe the polarities (+ and -). 5. Close the protective cover again. NB: The programmer setting information is stored for about 30 seconds with no power supply. If this replacement operation were to take longer, the date and time would be lost. Time and date setting The time and day of the week flash. Press the key on the remote control. The flashing numbers indicate the time. Press the and keys to adjust and press the key to confirm. The flashing numbers then indicate the minutes. Proceed in the same way as for the time; then likewise to set the year, the month and the day. CHARACTERISTICS MOUNTING INSTALLING THE BATTERIES - DATE AND TIME SETTING This operation enables (ON) or disables (Sleep) the TRD 300 remote control. Action SCREEN Press the key on the remote control or the thermostat to turn on the device or place it in Sleep mode. ON: the screen displays the predetermined temperature setting, mode and time. Example: Friday - 14:20 - (COMFORT) mode Sleep: the screen displays the time and day of the week TURNING ON – SLEEP [ON/Sleep] key: [ECO] key: Chosen weekly program Transmission of an order Keyboard locking indicator light Weekly programming (day of the week, time and operating mode) • top segment: COMFORT • bottom segment: ECONOMY • nothing: FROST PROTECTION Normal operation: time Programming: information / dialogue [Boost] key: [-] key: [+] key: [Programming] key: [Mode] key: THERMOSTAT KEYBOARD LOCKING/UNLOCKING Action SCREEN Locking: simultaneously press the and keys on the remote control for 3 seconds until the icon is displayed on the screen. Unlocking: simultaneously press the and keys on the remote control for 3 seconds until the icon disappears from the screen. Operating mode: Comfort Economy Frost protection Programming Boost Sleep Holiday Change of predetermined temperature setting Notice TRD 300_HAVERLAND_UK_AM_05032020.indd 1-5 6/3/20 13:36