Havis DS-PAN-800 series Manuals

Owner’s Manual Havis Docking Station For Panasonic Toughpad JT-B1 DS-PAN-800-SERIES_OMN_6-13 www.havis.com 1-800-524-9900 DS-PAN-801 DS-PAN-802 DS-PAN-803 DS-PAN-800 Series Havis, Inc. 75 Jacksonville Road, PO Box 2099 Warminster, PA 18974 47801 Anchor Court Plymouth, MI 48170 www.havis.com 1-800-524-9900 www.havis.com • 1-800-524-9900 DS-PAN-801 DS-PAN-802 DS-PAN-803 Before Beginning (Original Instructions) 2 11 Havis is pleased to provide this Owner’s Manual to aid in the proper installation and use of the DS-PAN-800 Series Docking Station for the Panasonic Toughpad JT-B1. For questions regarding the set-up of your DS-PAN-800 Series Docking Station, please contact Havis at 1-800-524-9900 or visit www.havis.com for additional product support and information. This Owner’s Manual applies to the following Part Numbers: • NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE AIRBAG DEPLOYMENT ZONE. • DO NOT USE COMPUTER WHILE DRIVING. • READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION. • FOR THE DS-PAN-801 AND DS-PAN-802 DOCKING STATIONS: DO NOT CONNECT DIRECTLY TO VEHICLE VOLTAGE SOURCE: This product requires a certified, automotive grade, Panasonic approved 24W power source rated for a continuous, 12VDC output (Havis Part Number LPS-113 or equivalent). Failure to comply with this requirement will cause product damage that is NOT repairable and is NOT covered under warranty. • FOR THE DS-PAN-803 DOCKING STATION: DO NOT CONNECT DIRECTLY TO VEHICLE VOLTAGE SOURCE: The Panasonic JT-B1 tablet requires a certified, Panasonic approved power source rated for a continuous, regulated 5VDC output. Panasonic recommends using the power adapter included with the tablet; failure to comply with this requirement will cause product damage that is NOT repairable and is NOT covered under warranty. • FOR DOCKING STATION MODELS EQUIPPED WITH A BUNDLED POWER SUPPLY (DS-PAN-802), REFER TO THE SUPPLIED LIND POWER SUPPLY REFERENCE GUIDE. • WHEN TABLET IS DOCKED, THE BATTERY WILL ONLY CHARGE BETWEEN 10°C to 35°C (50°F to 95°F). PLEASE REFER TO PANASONIC TOUGHPAD JT-B1 OWNER’S MANUAL FOR MORE INFORMATION. Related Products Havis offers a wide variety of accessory products specifically for use with the DS-PAN-800 Series Docking Station. For more information or to order, please visit www.havis.com. LPS-113 24W Power Supply External in-vehicle power supply and cable for Panasonic Toughpad JT-B1 with cigarette lighter adaptor. DS-DA-218 Desktop Stand for Tablet Docking Stations Durable stand for mounting tablet Docking Stations for use in the home or office. DS-DA-503 Replacement Keys Set of two (2) replacement keys for DS-PAN-800 Series Docking Stations. www.havis.com • 1-800-524-9900 Table of Contents 10 3 Port Replication Capability Specifications Parts Included Installation Cable Management Operation - Docking Operation - Undocking 4 4 4 6 7 8 10 • Do not place metal objects or containers of liquid on top of the Docking Station • If a malfunction occurs, immediately unplug the Power Supply and remove the tablet • Use only the specified Power Supply (Part # LPS-113) with this Docking Station • Do not store the Docking Station where water, moisture, steam, dust, etc. are present • Do not connect cables into ports other than what they are specified for • Do not leave the Docking Station in a high temperature environment (greater than 60°C, 140°F) for a long period of time • Do not connect cables to the DC Power Port or Ethernet Port exceeding 3 meters in length. Precautions Operation - Docking (continued) Operation - Undocking 1) If previously locked, unlock Docking Station using supplied key. 2) While holding tablet with one hand, lift the Latch Handle on the top of Docking Station. 3) Once unlatched grab both sides of tablet, rock the top forward and carefully lift out of Docking Station, top end first. 4) For theft deterrence, secure tablet by locking Docking Station with supplied key (Hardware Kit Item 2). EC DECLARATION OF CONFORMITY in accordance with EN 45014 Manufacturers Name: Havis, Inc. Manufacturers Address: 47801 Anchor Court, Plymouth Twp, MI 48170 USA Declares under our sole responsibility that the product: Product name: Havis Docking Station For Panasonic Toughpad B1 Model: DS-PAN-80X, where ‘X’ may be any alphanumeric character and which describes product options. May be followed by any alphanumeric characters which describe product options. Product Options: This declaration covers all options of the above product which bear the CE Marking. Is in conformity with the following standards or other normative documents: EMC Directive 2004/108/EC: EN 55022:2010, Class B, Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement EN 55024:2010, Information technology equipment - Immunity characteristics - Limits and methods of measurement Directive 2011/65/EU Restriction of the use of certain hazardous substances (RoHS) BS EN 50498:2010: Section 7, after market electronic equipment in vehicles. Supplementary Information: The product herewith complies with the requirements of the EMC Directive 2004/108/EC. This product requires the use of the provided e-Marked automotive power supply when used within vehicles. Plymouth twp, MI, USA June 26, 2013 Bruce Jonik, Director of Engineering , Havis, Inc. FCC 47CFR, Part 15 compliance: This is an FCC Class B device. Any changes or modifications to the model DS-PAN-80X not expressly approved by Havis, Inc. could void the user's authority to operate this equipment. www.havis.com • 1-800-524-9900 4 9 Parts Included Hardware Kit This Hardware Kit includes: 1. Zip Ties (5) 2. Keys (2) 3. M4 x 0.7 x 12mm long Pan Head Screws (5) 4. Washers, M4 (5) 5. Lock Washers, M4 (5) Extra hardware provided Tools required for installation: • #2 Philips Screwdriver (For attaching Docking Station to VESA 75mm hole pattern equipment with Pan Head M4 x 0.7 x 12mm Screws) NOTE: Once docked, tablet battery will only charge between 10° C - 35° C. Please refer to tablet owner’s manual for more information Operation - Docking 3) Pivot tablet so the top aligns with the Docking Connector and Locator Pins at the top of the Docking Station. Lower the Latch Handle to secure tablet in place. Latch Tab will engage in front of your Toughpad JT-B1 Port Replication Capability TOP of Docking Station BOTTOM of Docking Station USB 2.0 (x2) Ethernet RJ45 Power Input (12 V DC IN) Specifications Power Supply Input 12.0 V DC-In Dimensions 7.3” ( 18.5 cm) H x 4.5” ( 10.9 cm ) W x 3.0” ( 7.6 cm ) D Weight 0.75 lbs ( 0.28 kg ) Operating Environment -10° C to 50° C ( 14° F to 122°F ) Storage Environment -40° C to 85° C ( -40° F to 185° F ) 2) Hold tablet in landscape orientation, with bottom angled toward the Docking Station. Lower tablet into the bottom of the Docking Station while ensuring that the alignment sockets are aligned with the Docking Station’s Alignment Posts. If there is excessive force while lowering the Latch Handle, check orientation and position of tablet