Hawking HOD45B Manuals

Quick uick Installation nstallation Guide uide Hi-Gain Hi-Gain TM TM Outdoor Dual-Band Wireless-N Access Point/Bridge Outdoor Dual-Band Wireless-N Access Point/Bridge HOD45B Package Contents • 1x Outdoor Dual-Band Wireless-N Access Point/Bridge • 2x 5dBi Hi-Gain Dual-Band Dipole Antennas • 1x L-Shaped Antenna Connector • 1x Power-Over-Ethernet (PoE) Adapter • 1x Power Cable and Power Transformer • 1x Waterproof Gasket • 1x Three foot Ethernet Cable • 1x Setup CD-ROM • 1x Quick Installation Guide (QIG) Requirements • Ethernet Cable is required (length will depending on mounting location) • Wired or Wireless Internet Connection • A Wired or Wireless Network Device (Tablet, Smartphone, Mac or Windows Computer • Power Outlet Start Start Here Here   This Quick Installation Guide provides a quick and easy way to set up the HOD45B in Access Point, Bridge or Universal Repeater mode. If you need to use the other modes, please refer to the manual located on the CD. i 1) Plug the provided antennas into the HOD45B. One antenna will be connected to an L-Shaped antenna connector. Screw the 2 antennas onto the bottom panel of the HOD45B. 2) Installing the Waterproof Gasket. Using a network cable, please attach the waterproof gasket in the following order. Connect the Ethernet cable first into the Ethernet/Power port on the HOD45B. Then tighten the bottom cap on the Waterproof Gasket to secure. 1 Hardware Setup 3) Installing the Power-over-Ethernet (PoE) Adapter Plug the other end of the Ethernet Cable into the PoE Adapter. It should go into the port labeled “Power + Data Out”. Connect the power adapter and power transformer to the PoE Adapter and into an available AC Socket. Optional: If you wish to connect to the HOD45B using an Ethernet cable from a computer, connect an Ethernet cable to the port labeled “LAN” and plug the other end into your computer. Skip to Step 3. Note: An outdoor Ethernet cable is not included with the HOD45B and must be purchased serperately. The maximum recommended length if 150 Feet for the Ethernet Cable. O th ca Et “L yo Reset Button Reset to manufacturer settings - Unscrew cover and use a long, thin object to press for a minimum of 15 seconds, unplug the power for a few seconds then plug it in Antenna Connectors Two RP N-Jack Antenna Connectors Ethernet/Power Port Connects to PoE adapter for power and for wired connections

website www.hawkingtech.com e-mail [email protected] © COPYRIGHT 2013 HAWKING TECHNOLOGIES,INC. ALL RIGHTS RESERVED. USER’S MANUAL Hi-Gain™ Outdoor Dual Band Wireless N Access Point/Bridge HOD45B USER’S MANUAL