Hewlett Packard Enterprise Aruba 370 Series Manuals

Aruba 370 Series Outdoor Access Point Startup Guide 0512024-05 | January 2018 1 The Aruba 370 Series outdoor wireless access points (AP-374, AP-375 and AP-377) support IEEE 802.11ac standards for high-performance WLAN, and are equipped with two radios, which provide network access and monitor the network simultaneously. The Multi-User Multiple-Input, Multiple-Output (MU-MIMO) technology allows these access points to deliver high-performance 802.11n 2.4 GHz and 802.11ac 5 GHz functionality, while also supporting 802.11a/b/g wireless services. Package Contents The following materials are included with this product:  370 Series access point  Cable gland x 1  USB console cable x 1  Copper lug x 1  M4x6 screw x1 Inform your supplier if there are any incorrect, missing, or damaged parts. To return this product, repack this unit and other included materials into the original packaging before returning it to the supplier. Installation This device must be professionally installed and serviced by a trained Aruba Certified Mobility Professional (ACMP) or similar Aruba- certified technician. To install your 370 Series access point, refer to the Aruba 370 Series Outdoor Access Points Installation Guide by scanning the QR code below, or visit http://support.arubanetworks.com, open the Documentation tab, then select Hardware Installation Guide > Access Points > AP-370 Series. Software For instructions on initial setup and software configuration, refer to the latest version of the AP Software Quick Start Guide by scanning the QR code below, or visit http://support.arubanetworks.com, open the Documentation tab, then select Software User & Reference Guides > Aruba Unified Software End User License Agreement To view the Software End User License Agreement, scan the QR code below, or visit http://support.arubanetworks.com, open the Documentation tab, then select Software End User License Agreement. Regulatory Compliance Aruba access points are classified as radio transmission devices and are subject to governmental regulation. The network administrator(s) is/are responsible for ensuring that this device operates in accordance with local/regional laws of the host domain. Specifically, access points must use channel assignments appropriate to the location in which the access point will be deployed. For a complete list of approved devices in your country, refer to the Aruba Downloadable Regulatory Table (DRT) release notes by scanning the QR code below, or visit http://www.arubanetworks.com/ techdocs/DRT/Default.htm. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Regulatory Model Numbers  AP-374: APEX0374  AP-375: APEX0375  AP-377: APEX0377 FCC Statement Improper termination of access points installed in the United States configured to a non-US model controller is a violation of the FCC grant of equipment authorization. Any such willful or intentional violation may result in a requirement by the FCC for immediate termination of operation and may be subject to forfeiture (47 CFR 1.80). Canada User manuals for license-exempt radio apparatus shall contain the following text, or an equivalent notice that shall be displayed in a conspicuous location, either in the user manual or on the device, or both: This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and(2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil numerique de la classe B respecte toutes les exigencies du Reglement sur le materiel brouilleur du Canada. Déclaration d’Industrie Canada Conformément aux réglementations d’Industrie Canada, cet émetteur-récepteur radio doit être utilisé uniquement avec une antenne dont le type et le gain maximal doivent être approuvés par Industrie Canada. Pour réduire les interférences radio potentielles, le type d’antenne et son gain doivent être choisis de façon à ce que la puissance isotrope rayonnée équivalente (PIRE) ne dépasse pas les valeurs nécessaires à une communication efficace. Ce périphérique est conforme aux règlements RSS exempts de licence d’Industrie Canada. L’utilisation de ce périphérique est